virtuals - fix paragraphs after merging #539

source/manual/virtuals.rst

@@ -18,11 +18,10 @@ For optimum performance and compatibility, these guides are given:
 
 .. image:: images/disableoffloading.png
 
-------------------
 
-------
 VMware ESXi
-------
+--------------------
+
 VMware offers full instructions for installing FreeBSD, these can be found
 `here <https://partnerweb.vmware.com/GOSIG/FreeBSD_13x.html>`__.
 
@@ -35,23 +34,23 @@ To install the VMware tools just goto :menuselection:`System --> Firmware --> Pl
 
    While other network setups may work fine, the VMXNET 3 is the recommended one according to VMware's Compatibility Guide.
 
-------
+
 Xen
-------
+--------------------
 To install the Xen tools just goto :menuselection:`System --> Firmware --> Plugins` and install
 **os-xen** by clicking on the **+** sign next to it.
 
 .. image:: images/os-xen.png
 
-------
+
 HyperV
-------
+--------------------
 HyperV Generation 1 and 2 are supported out of the box, no additional drivers
 or tools are needed.
 
 * Secure Boot setting must be un-ticked in the Hardware > Security section for the VM.
 
-------
+
 KVM
 ------
 **i440FX chipset**
@@ -62,16 +61,14 @@ As of 22.1.x, OPNsense is based on FreeBSD 13.0, which includes support for the
 generation of KVM virtio devices.
 Note that this was a relatively recent addition to FreeBSD, so it may not be as well tested as the i440 support.
 
-------
+
 Others
-------
+--------------------
 OPNsense can be installed on all virtual machines that support FreeBSD (such as Bhyve, VirtualBox).
 
-------------------
 
-------
 Hosted
-------
+--------------------
 For hosted installations where you can't install using the DVD ISO an alternative
 approach is available in the form of **opnsense-bootstrap**.
 
@@ -91,7 +88,7 @@ installation.  Both UFS and ZFS installations are supported.
 opnsense bootstrap is available for our
 `github source repository <https://github.com/opnsense/update/tree/master/bootstrap>`__
 
-------------------
+
 
 --------------------
 Amazon AWS EC2 Cloud
@@ -126,23 +123,23 @@ article first.
 
 
 File copy failed during installation
-------------
+-----------------------------------------
 This issue is most likely caused by low memory setting. Make sure your virtual
 OPNsense installation has a minimum of 1 GB of RAM.
 
 
 Disk Errors on VMware
-------------
+-----------------------------------------
 This issue can be caused by a defective drive. Changing the drive mode to IDE has
 been reported to help for certain ESXi versions.
 
 
 NAT issues on XenServer
-------------
+-----------------------------------------
 This issue has been reported to be solved by disabling checksum offloading on both
 OPNsense domU and Vifs.
 
 
 Traffic Shaper does not work on VMware
-------------
+-----------------------------------------
 If you are using vmxnet3 drivers try to switch to E1000.