A Remote Control Platform for all ESP Controlled Sex Toys,with a focus on the OSSM and related toys.
Intially developed for the OSSM Project: https://github.com/KinkyMakers/OSSM-hardware
To help with development and design join the KinkyMakers Discord: https://discord.gg/MmpT9xE . Be sure to say hello in the #m5-remote channel.
Works not with Official OSSM Firmware Right now. This Branch is needed: https://github.com/ortlof/OSSM-Stroke
Supported in this version of the M5 remote:
| OSSM Machine | https://github.com/KinkyMakers/OSSM-hardware |
| EJECT | https://github.com/ortlof/EJECT-cum-tube-project | [A Work in Progress]
!! IMPORTANT!: Only the M5 Stack CORE2 works (incl V1.1) with the OSSM M5 Remote PCB !!
BOM is on Octopart for Easy Sourcing: https://octopart.com/bom-tool/rURYMuwB
PCB Files are located in the /OSSM-M5-Remote/Hardware/PCB folder if you want to make one yourself or use a different manufacturer other than PCBWay.
| Quantity | Part | Sourcing EU | Price € |
|---|---|---|---|
| 2x | M3x25mm Hex Head Cap Bolt | https://www.amazon.de/Edelstahl-Innensechskant-Bolzenset-Eisenrahmen-Mechanischer-Innensechskantschraube-Mutternset/dp/B07PPFT871/ | 12,97 € |
| 4x | M3x20mm Hex Head Cap Bolt | Comes as part of the set mentioned above | " |
| 4x | Heat Set inserts M3 | https://www.amazon.de/ruthex-Gewindeeinsatz-St%C3%BCck-Gewindebuchsen-Kunststoffteile/dp/B08BCRZZS3 | 8,99 € |
| 1x | 3,7v 2000mAh Lipo Batterie Size 34,5 mm x 10,6 mm x 56 mm | https://www.amazon.de/EEMB-103454-2AhLithium-Schutzplatine-Isolationsbeschichtung/dp/B08214DJLJ/ | 14,89 € |
| 4x | Encoder Knob Bought or 3D Printed | https://de.aliexpress.com/item/1005001394286414.html | 5 € |
| 1x | OSSM M5 Remote PCB | KinyMaker Discord #M5-Remote Channel or https://www.pcbway.com/project/shareproject/M5Stack_Core2_Remote_Plattform_2cb5bac0.html | 15 € |
| Quantity | Part | Sourcing US | Price $ |
|---|---|---|---|
| 2x | M3x25mm Hex Head Cap Bolt | https://www.amazon.com/dp/B09NR8X2LV | $17.99 |
| 4x | M3x20mm Hex Head Cap Bolt | Comes as part of the set mentioned above | " |
| 4x | Heat Set inserts M3 | https://www.amazon.com/ruthex-M3-Threaded-Inserts-RX-M3x5-7/dp/B08BCRZZS3 | $10.99 |
| 1x | 3.7v 2000mAh Lipo Battery Size 34.5 X 56 X 10.6 mm (The wires will need to be reversed in the connector on this one! See Assembly instructions for more info.) | https://www.amazon.com/EEMB-2000mAh-Battery-Rechargeable-Connector/dp/B08214DJLJ/ | $14.99 |
| 4x | Encoder Knob Bought or 3D Printed | https://www.aliexpress.us/item/3256801207971662.html?gatewayAdapt=deu2usa4itemAdapt | $5.00 |
| 1x | M5 Remote PCB | KinyMaker Discord #M5-Remote Channel or https://www.pcbway.com/project/shareproject/M5Stack_Core2_Remote_Plattform_2cb5bac0.html | $30.00 |
| Quantity | Part | Information |
|---|---|---|
| 1x | Bottom.stl or Bottom_Adafruit_LIPO.stl or Bottom-Magnets.stl | There is a specific version for the wider Adafruit LIPO battery. Print with the base side facing down, 6 walls 20% Infill |
| 1x | TOP-*-Keycap-Standoff.stl | Top Depends on your Keycap: Cherry or DSA (DSA is wider) |
| 4x | M5_Remote_Knob_Customizable.scad | If you go for the 3d Printed knobs |
Filament - A good quality PLA works well. While there are no threads it is recommended that your printer is well calibrated.
Note: If you are one of the very small number of Version 1 PCB users, you will need to change your version to V1 in the config.h. The current version in GitHub is V2.
- Power on the OSSM and let it home.
- Power on the OSSM M5 Remote.
- Press the left encoder to select 'Connect'
- You can verify it is connected by looking in the top left corner, it should say 'connected'.
- You can now begin use. You'll need to set the speed, depth and stroke to more than 0 and press the middle key to start. Start the speed out slow.
