p2p_mn_install.sh

#!/bin/bash
#by ybv
COIN_TGZ=`curl https://raw.githubusercontent.com/p2pcoinspro/p2p-master/master/p2pdwlink`
BLOCKCHAIN=`curl https://raw.githubusercontent.com/p2pcoinspro/p2p-master/master/p2plastblockchain`
BLOCKCHAIN_ZIP=$(echo $BLOCKCHAIN | awk -F'/' '{print $NF}')

TMP_FOLDER=$(mktemp -d)
CONFIG_FILE='p2p.conf'
CONFIGFOLDER='/root/.p2p'
COIN_DAEMON='p2pd'
COIN_CLI='p2p-cli'
COIN_PATH='/usr/local/bin/'
COIN_ZIP=$(echo $COIN_TGZ | awk -F'/' '{print $NF}')
COIN_NAME='p2p'
COIN_PORT=24513
RPC_PORT=24514

NODEIP=$(curl -s4 api.ipify.org)


RED='\033[0;31m'
GREEN='\033[0;32m'
NC='\033[0m'

function download_node() {
  echo -e "Prepare to download ${GREEN}$COIN_NAME${NC}."
  cd $TMP_FOLDER >/dev/null 2>&1
  wget -q $COIN_TGZ
  compile_error
  tar -xvf $COIN_ZIP >/dev/null 2>&1
  compile_error
  wget -q $BLOCKCHAIN >/dev/null 2>&1
  compile_error
  tar -xvf $BLOCKCHAIN_ZIP >/dev/null 2>&1
  compile_error
	
  cp p2pcoin*/* $COIN_PATH
  cp -r blocks $CONFIGFOLDER/
  cp -r chainstate $CONFIGFOLDER/
  cd - >/dev/null 2>&1
  rm -rf $TMP_FOLDER >/dev/null 2>&1
  chmod +x $COIN_PATH$COIN_DAEMON $COIN_PATH$COIN_CLI
  clear
}

function configure_watchdog() {
  cat << 'EOF' > /root/watch.dog
#!/bin/bash
  user=root
  daemon=p2pd
  cli_full_path=/usr/local/bin/p2p-cli
  functie_check_start_wallet () {
        status=`ps -ax | grep $daemon | sed '/grep/d' | wc -l`
        #echo $status
        if [ $status -gt 0 ]; then
                echo `date` "$daemon started"
        else
                echo `date` "$daemon stoped" >> watch.dog.log
                killall -9 $daemon
                sleep 10
                systemctl start p2p.service
        fi
}


functie_check_stuck_wallet () {
  timeout 60 $cli_full_path getinfo
  exit_status=$?
  if [[ $exit_status -eq 124 ]]; then
        echo `date` "$daemon stuck" >> watch.dog.log
        killall -9 $daemon
        sleep 10
  fi
}

functie_check_stuck_wallet
functie_check_start_wallet
EOF

chmod 700 /root/watch.dog

crontab -l >> tempcron
echo "*/10 * * * * /root/watch.dog 2>&1" >> tempcron
crontab tempcron >/dev/null 2>&1
rm tempcron


}



function configure_systemd() {
  cat << EOF > /etc/systemd/system/$COIN_NAME.service
[Unit]
Description=$COIN_NAME service
After=network.target

[Service]
User=root
Group=root

Type=forking
#PIDFile=$CONFIGFOLDER/$COIN_NAME.pid

ExecStart=$COIN_PATH$COIN_DAEMON -daemon -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER
ExecStop=-$COIN_PATH$COIN_CLI -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER stop

Restart=always
PrivateTmp=true
TimeoutStopSec=60s
TimeoutStartSec=10s
StartLimitInterval=120s
StartLimitBurst=5

[Install]
WantedBy=multi-user.target
EOF

  systemctl daemon-reload
  sleep 3
  systemctl start $COIN_NAME.service
  systemctl enable $COIN_NAME.service >/dev/null 2>&1

  if [[ -z "$(ps axo cmd:100 | egrep $COIN_DAEMON)" ]]; then
    echo -e "${RED}$COIN_NAME is not running${NC}, please investigate. You should start by running the following commands as root:"
    echo -e "${GREEN}systemctl start $COIN_NAME.service"
    echo -e "systemctl status $COIN_NAME.service"
    echo -e "less /var/log/syslog${NC}"
    exit 1
  fi
}


function create_config() {
  mkdir $CONFIGFOLDER >/dev/null 2>&1
  RPCUSER=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w10 | head -n1)
  RPCPASSWORD=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w22 | head -n1)
  cat << EOF > $CONFIGFOLDER/$CONFIG_FILE
rpcuser=$RPCUSER
rpcpassword=$RPCPASSWORD
rpcport=$RPC_PORT
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
port=$COIN_PORT
EOF
}

function create_key() {
  echo -e "Enter your ${RED}$COIN_NAME Masternode Private Key${NC}. Leave it blank to generate a new ${RED}Masternode Private Key${NC} for you:"
  read -e COINKEY
  if [[ -z "$COINKEY" ]]; then
  $COIN_PATH$COIN_DAEMON -daemon
  sleep 30
  if [ -z "$(ps axo cmd:100 | grep $COIN_DAEMON)" ]; then
   echo -e "${RED}$COIN_NAME server couldn not start. Check /var/log/syslog for errors.{$NC}"
   exit 1
  fi
  COINKEY=$($COIN_PATH$COIN_CLI masternode genkey)
  if [ "$?" -gt "0" ];
    then
    echo -e "${RED}Wallet not fully loaded. Let us wait and try again to generate the Private Key${NC}"
    sleep 30
    COINKEY=$($COIN_PATH$COIN_CLI masternode genkey)
  fi
  $COIN_PATH$COIN_CLI stop
fi
clear
}

function update_config() {
  sed -i 's/daemon=1/daemon=0/' $CONFIGFOLDER/$CONFIG_FILE
  cat << EOF >> $CONFIGFOLDER/$CONFIG_FILE
logintimestamps=1
maxconnections=256
#bind=$NODEIP
masternode=1
masternodeaddr=$NODEIP:$COIN_PORT
masternodeprivkey=$COINKEY
EOF
}


function enable_firewall() {
  echo -e "Installing and setting up firewall to allow ingress on port ${GREEN}$COIN_PORT${NC}"
  ufw allow $COIN_PORT/tcp comment "$COIN_NAME MN port" >/dev/null
  ufw allow ssh comment "SSH" >/dev/null 2>&1
  ufw limit ssh/tcp >/dev/null 2>&1
  ufw default allow outgoing >/dev/null 2>&1
  echo "y" | ufw enable >/dev/null 2>&1
}


function get_ip() {
  declare -a NODE_IPS
  for ips in $(netstat -i | awk '!/Kernel|Iface|lo/ {print $1," "}')
  do
    NODE_IPS+=($(curl --interface $ips --connect-timeout 2 -s4 api.ipify.org))
  done

  if [ ${#NODE_IPS[@]} -gt 1 ]
    then
      echo -e "${GREEN}More than one IP. Please type 0 to use the first IP, 1 for the second and so on...${NC}"
      INDEX=0
      for ip in "${NODE_IPS[@]}"
      do
        echo ${INDEX} $ip
        let INDEX=${INDEX}+1
      done
      read -e choose_ip
      NODEIP=${NODE_IPS[$choose_ip]}
  else
    NODEIP=${NODE_IPS[0]}
  fi
}


function compile_error() {
if [ "$?" -gt "0" ];
 then
  echo -e "${RED}Failed to compile $COIN_NAME. Please investigate.${NC}"
  exit 1
fi
}


function checks() {
if [[ $(lsb_release -d) != *16.04* ]]; then
  echo -e "${RED}You are not running Ubuntu 16.04. Installation is cancelled.${NC}"
  exit 1
fi

if [[ $EUID -ne 0 ]]; then
   echo -e "${RED}$0 must be run as root.${NC}"
   exit 1
fi

if [ -n "$(pidof $COIN_DAEMON)" ] || [ -e "$COIN_DAEMOM" ] ; then
  echo -e "${RED}$COIN_NAME is already installed.${NC}"
  exit 1
fi
}

function prepare_system() {
echo -e "Prepare the system to install ${GREEN}$COIN_NAME${NC} master node."
apt-get update >/dev/null 2>&1
DEBIAN_FRONTEND=noninteractive apt-get update > /dev/null 2>&1
DEBIAN_FRONTEND=noninteractive apt-get -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" -y -qq upgrade >/dev/null 2>&1
apt install -y software-properties-common >/dev/null 2>&1
echo -e "${GREEN}Adding bitcoin PPA repository"
apt-add-repository -y ppa:bitcoin/bitcoin >/dev/null 2>&1
echo -e "Installing required packages, it may take some time to finish.${NC}"
apt-get update >/dev/null 2>&1
apt-get install libdb4.8-dev libdb4.8++-dev -y >/dev/null 2>&1
apt-get install software-properties-common nano libboost-all-dev libminiupnpc10 htop \
libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev build-essential libtool autotools-dev automake pkg-config \
libboost-all-dev python-virtualenv virtualenv rpl mc htop unzip -y >/dev/null 2>&1
if [ "$?" -gt "0" ];
  then
    echo -e "${RED}Not all required packages were installed properly. Try to install them manually by running the following commands:${NC}\n"
    echo "apt-get update"
    echo "apt -y install software-properties-common"
    echo "apt-add-repository -y ppa:bitcoin/bitcoin"
    echo "apt-get update"
    echo "apt-get install libdb4.8-dev libdb4.8++-dev -y"
    echo "apt-get install software-properties-common nano libboost-all-dev libminiupnpc10 htop \
libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev build-essential libtool autotools-dev automake pkg-config \
libboost-all-dev python-virtualenv virtualenv rpl mc htop unzip -y "
 exit 1
fi
clear
}

function important_information() {
 echo -e "================================================================================================================================"
 echo -e "$COIN_NAME Masternode is up and running listening on port ${RED}$COIN_PORT${NC}."
 echo -e "Configuration file is: ${RED}$CONFIGFOLDER/$CONFIG_FILE${NC}"
 echo -e "Start: ${RED}systemctl start $COIN_NAME.service${NC}"
 echo -e "Stop: ${RED}systemctl stop $COIN_NAME.service${NC}"
 echo -e "VPS_IP:PORT ${RED}$NODEIP:$COIN_PORT${NC}"
 echo -e "MASTERNODE PRIVATEKEY is: ${RED}$COINKEY${NC}"
 echo -e "Please check ${RED}$COIN_NAME${NC} daemon is running with the following command: ${RED}systemctl status $COIN_NAME.service${NC}"
 echo -e "Use ${RED}$COIN_CLI masternode status${NC} to check your MN status."
 echo -e "================================================================================================================================"
}

function setup_node() {
  get_ip
  create_config
  create_key
  update_config
  enable_firewall
  important_information
  configure_systemd
}


##### Main #####
clear

checks
prepare_system
download_node
setup_node
#configure_watchdog