Skip to content

Multiprotocol v1.2.1.39

Compare
Choose a tag to compare
@benlye benlye released this 08 May 14:53

Change Log

  • Too many things

Compiled Files

Multiprotocol hex/bin files attached are only for reference/test purposes.

While they are fully working it's really easy to compile them with you own settings by modifying the file _Config.h and following the compile and upload documentation.

They have been compiled with the source files from this release date using the default settings AETR, telemetry enabled, serial mode enabled with inversion and ppm mode enabled using default table.

Atmega328 Builds (file names beginning with 'MULTI-AVR_')

  • Only 1 RF module and associated protocols have been included in each hex to fit in the Atmega328. For example Multiprotocol_Vxxxx_A7105.hex means that only protocols depending on A7105 protocols are included.
  • There are no files for the NRF24L01 as there are too many protocols to fit in a single build
  • Files with TXFLASH in the name are built with the OptiBoot bootloader for flashing from a transmitter
  • Files with USBASP in the name are built without a bootloader for flashing using a USBasp programmer

STM32 Builds (file names beginning with 'MULTI-STM_')

  • All radio modules and protocols are included in all builds
  • Files with TXFLASH in the name are built with a bootloader and USB support for flashing from a transmitter or via the module's USB port
  • Files with FTDI in the name are built without a bootloader or USB support for flashing using an FTDI adapter
  • OpenTx version (files with OPENTX in the name) have the MULTI_TELEMETRY parameter enabled

OrangeRX Builds (file names beginning with 'MULTI-OrangeRX_')

  • All CYRF6936 based protocols are included

Radio Firmware

To access new protocols and features from er9x/ersky9x/OpenTX, you'll need to upgrade to the latest version available here: