README.LINUX_SERVER

       *** SERVING LINUX SYSCALLS IN RTAI HARD REAL TIME MODE ***

The default RTAI way of dealing with Linux syscalls done while in hard real
time consists in moving a task wanting to use Linux back to soft mode, 
recovering it to hard real time again, as soon as possible, afterward. See the 
related RTAI configuration helper for an explanation of the different available 
modes to implement the "as soon as possible" above on various architectures.

This README documents possible alternative ways to access Linux services from 
hard real time RTAI applications in user space. Such a support is based on the 
creation of a general purpose server thread that takes over Linux requests. 

It must be noticed that if Linux is to be used synchronously at the very moment
Linux is called the task becomes timed by Linux, wherever a Linux server is 
used or not. So hard real time constraints cannot be satisfied anyhow. The use 
of a Linux server has an advantage though. In fact it takes just two context 
switches, in place of the four used by hard-soft-hard transitions. Moreover it 
ensures that RTAI returns to hard real time immediately after the Linux syscall 
has finished while, if the architecture does not support the immediate Linux 
syscall mode reliably for all Linux syscalls, there will be the need to wait 
for a call to an RTAI function to go back in RTAI hard real time fully. That 
will add even far more latencies when a hard RTAI task does some processing 
for a significant amount of time after the Linux syscall, without using any 
RTAI service. So, provided it is allowed loosing real time, installing a 
synchronous server might be the best way to interact with Linux anyhow.

There are however instances in which Linux can be used asynchronously. In 
such cases RTAI hard real time tasks might use Linux without loosing hard
real time determinism. Such a capability can be implemented in many ways, 
the one chosen by RTAI is based on a buffering of async Linux syscalls mated 
either to an optional callback function or to inquiry mechanisms to help 
implementing any user own async call policy. Beware of not reusing read/write 
data buffers made available to async calls though. 
If you do not want, or cannot, either inquire for or check async terminations, 
to avoid running the risk of reusing an yet unserved buffer, use RTAI dynamic 
memory or SCB to allocate them in real time, freeing them afterward, possibly 
with the help of a support callback function. 
Async support is a bit tricky but, provided one cares of what said above, it
should work always when Linux syscalls arguments are fully contained in the 
passed registers structure. That is not the case for a few Linux syscalls that 
are multiplexed within a single framework, whereas libc can end in building a 
hidden object on the stack, so that it is not assured it will be available at 
the time the server uses it. On some archs a notable example of that is the 
socketcall, but RTAI should already care of it appropriately. There remain 
nonetheless the chance of other instances to be cared as well. So beware that 
some async calls might not work with a few Linux services yet, in which case 
you should let us know about it for a possible fix.
Just to mention another typical care to be taken we notice that printf might
work as it is but it will often crash. So the safe way to printf is as follows:
- sprintf(buffer, format, args, ....);
- write(STDOUT_FILENO, buffer, strlen(buffer));

Provided the socketcall has been intercepted well you should be able to do many
IO operations asynchronously, e.g.: dumping data directly to disk, Linux ipcs 
and POSIX mq, fifos, pipes, serial and networked communications etc. etc. 
In many applications one often requires RTAI specific IO drivers just to avoid 
loosing real time for communications with non real time support/interface 
processes and tasks. The async server should be of much help in such cases by 
letting you use standard Linux, with the ensuing advantage of not needing any 
special hard real time driver.

Clearly what above does not impede you to set up your own async server to 
which your hard real time task can be connected by using RTAI non blocking 
communication functions, i.e. those ending with "_if". So the choice of the 
most viable solution is left to you.
 
How it works
------------

By using the functions described below a server thread is created that will
block waiting for parent task requests to Linux. Whenever the RTAI scheduler 
intercepts a Linux syscall in hard real time mode it passes it to the server 
thread and:
- remains waiting for its execution if in sync mode;
- returns immediately if in async mode.
The server carries out the syscall and:
- resumes the hard real time parent, returning what returned by Linux, if in 
sync mode:
- calls a callback function, if one has been made available, in async mode,
returning an identifier.

As said in sync mode real time is lost, but there will be two task switches per
Linux service request only, while there will be four if no sync server is used.
In async mode there is no need for any task switch, as the server will execute 
in soft mode when there will be no RTAI real time activity any more.
The need of passing syscall data to the server is responsible for most of the 
penalty incurred by using a Linux server. 
Let's stress once more that this is a far better alternative way to what the 
RTAI scheduler will have to do anyhow, i.e. make you soft and recover hard mode 
at the next RTAI proper service call, which will require four task switches, 
keeping you in Linux hands from the Linux syscall till an RTAI function is 
called again. 
With a server instead you will stay soft just either till Linux has finished 
servicing your request, when in sync mode, or kept working in real time, when
in async mode.

API Functions prototypes
------------------------

The available functions are:

- void *rt_create_linux_syscall_server(RT_TASK *task, int mode, void 
(*callback_fun)(long, long), int nr_bufd_async_calls);
create a Linux syscall server for task, a NULL task means the current one; a 
non NULL return is the handle allowing you to link to the server for any 
further management request, see functions below, NULL indicates a failure in 
setting the server up; a NULL callback_fun is allowed. It will operate 
according to mode setting, either SYNC_LINUX_SYSCALL or ASYNC_LINUX_SYSCALL. 
Beware of using an appropriate nr_bufd_async_calls. If async requests overrun 
the latest will be discarded till some space is available again.
If a server exists already it is terminated and a new one replaces it.

- void rt_destroy_linux_syscall(RT_TASK *task);
destroy the linux_syscall_server of task, if NULL use the current task. 

- void *rt_sync_async_linux_syscall_server_create(RT_TASK *task, int mode, 
  void (*callback_fun)(long, long), int nr_bufd_async_calls);
legacy interface, the same as: 
rt_create_linux_syscall_server(task, mode, callback_fun, nr_bufd_async_calls).

- void *rt_linux_syscall_server_create(RT_TASK *task);
legacy call, the same as:
rt_create_linux_syscall_server(task, SYNC_LINUX_SYSCALL, NULL, 1).

Notice that in sync mode Linux functions will return their usual values while 
that is not possible in async mode and what returned is an identifier, id, of 
that specific async call, a negative id meaning the call was not satisfied
because of a buffer overrun. When <= 0 ids can be used for monitoring async
calls execution, as explained below.

- int rt_set_linux_syscall_mode(int mode, void (*callback_fun)(long, long);
to both switch between sync and async mode and change the call back function.
It returns EINVAL if there is no server or the mode setting is not correct.

Notice that this is a legacy call, you'd better use:

- int rt_linux_syscall_mode(struct linux_syscalls_list *syscalls, int mode);
to switch between sync and async mode; syscalls is the handle returned by
rt_sync_async_linux_syscall_server_create; mode can be: SYNC_LINUX_SYSCALL, 
ASYNC_LINUX_SYSCALL, LINUX_SYSCALL_GET_MODE.
The function returns the previous mode and LINUX_SYSCALL_GET_MODE can be used
to just inquire for it, in which case mode is discarded. EINVAL is returned if
syscalls is not a valid pointer. 

- void *rt_linux_syscall_cbfun(struct linux_syscalls_list *syscalls, void (*cbfun)(long, long));
to change the callback function; syscalls is the handle returned by
rt_sync_async_linux_syscall_server_create; cbfun can be either a NULL, no 
callback will be used, a pointer to a true callback function, 
LINUX_SYSCALL_GET_CALLBACK.
The function returns the pointer to the previous callback function and 
LINUX_SYSCALL_GET_CALLBACK can be used to just inquire for it. EINVAL is 
returned if syscall is not a valid pointer 

The callback function afford a notification control mechanism for async calls.
An alternative way to monitor async calls execution is given by the following
functions:

- int rt_linux_syscall_status(struct linux_syscalls_list *syscalls, int id, int *retval);
syscalls is the handle returned from rt_sync_async_linux_syscall_server_create;
id is the value returned by the call to Linux, retval is a pointer to an int
that will receive the value returned by Linux after executing the related 
service.
It returns:
- EINVAL if syscalls is not a valid pointer or id < 0
- ENOENT if no id is found, meaning the function has been overwritten;
- ECANCELED when the function has call has been explicitly canceled by the 
  user;
- EINPROGRESS when the function is pending waiting for execution;
- 0 when the function has been executed, in such a case retval, if not NULL,
  will receive the value returned by Linux.

- int rt_linux_syscall_cancel(struct linux_syscalls_list *syscalls, int id);
Syscalls is the handle returned from rt_sync_async_linux_syscall_server_create;
id is the value returned by the call to Linux.
It returns:
- EINVAL if syscalls is not a valid pointer or id < 0
- ENOENT if no id is found, meaning the function has been overwritten;
- -id when the function has been executed already;
- 0 if the function has been successfully canceled.

Examples
-------

They are in RTAI "showroom" CVS: linux_server and printer_server.

Paolo.