LaserLampe

This is a small luminaire for small cabins like yachts, boats, vans, ...

For the short version of LaserLampe you need the following:

Laser cut parts:

• Bottom_1_short (wood, 4mm)
• Bottom_2_short (wood, 4mm)
• Frame_short (wood, 4mm)
• Cover_short (acrylic, 3mm, opaque)
  Screws & nuts:
• 4 press-in nuts M3
• 4 screws M3x16

For the long version of LaserLampe you need the following:

Laser cut parts:

• 2x Bottom_1_long (wood, 4mm)
• 2x Bottom_2_long (wood, 4mm)
• 2x Frame_long (wood, 4mm)
• Cover_long (acrylic, 3mm, opaque)
  Screws & nuts:
• 6 press-in nuts M3
• 6 screws M3x16

Assembly

1. Push in the press-in nuts in 'Bottom_1_x' parts
2. Stack the parts on top of each other
3. Fix them with the screws