This repository has been archived by the owner on Oct 13, 2022. It is now read-only.
-
Notifications
You must be signed in to change notification settings - Fork 535
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Thanks! Do you know anything about MR12U? I assume that it is also similar to MR10U or MR13U, but I need someone to confirm that. |
it should be same as 13u howerver I do not have this device.I can not
|
Closed
ranma
added a commit
to ranma/u-boot_mod
that referenced
this pull request
Oct 19, 2015
Big warning: The original bootloader only supports gzip compression, while u-boot_mod only supports lzma. To flash one of the OpenWRT images, you have to remove the g-zip decompressor stub (or recompress it with lzma) at offset 0x200 in the image file. Boot log: ********************************************* * U-Boot 1.1.4 (Oct 20 2015, 01:13:35) * ********************************************* AP83 (AR9132) U-Boot for TL-WR1043ND DRAM: sri 32 MB FLASH: Winbond W25Q128 (16 MB) CLOCKS: 400/400/200/25 MHz (CPU/RAM/AHB/SPI) ** Warning: using fixed MAC address! LED on during eth initialization... ag7100_enet_initialize... No valid address in Flash. Using fixed address : cfg1 0xf cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up Hit any key to stop autoboot: 1 ��0 Booting image at: 0xBF020000 Image name: OpenWrt r46767 Image type: MIPS Linux Kernel Image (lzma compressed) Data size: 1106432 Bytes = 1.1 MB Load address: 0x80060000 Entry point: 0x80060000 Uncompressing kernel image... OK! Starting kernel... OpenWrt kernel loader for AR7XXX/AR9XXX Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> Looking for OpenWrt image... found at 0xbf022000 Decompressing kernel... done! Starting kernel at 80060000... [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) pepe2k#1 Fri Sep 4 21:55:57 CEST 2015 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9132 rev 2 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 28516K/32768K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 4252K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is TP-LINK TL-WR1043ND [ 0.390000] Switched to clocksource MIPS [ 0.390000] NET: Registered protocol family 2 [ 0.400000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.410000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.420000] TCP: reno registered [ 0.420000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.430000] NET: Registered protocol family 1 [ 0.440000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.480000] msgmni has been set to 55 [ 0.480000] io scheduler noop registered [ 0.490000] io scheduler deadline registered (default) [ 0.490000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.500000] console [ttyS0] disabled [ 0.530000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A [ 0.540000] console [ttyS0] enabled [ 0.540000] console [ttyS0] enabled [ 0.540000] bootconsole [early0] disabled [ 0.540000] bootconsole [early0] disabled [ 0.550000] m25p80 spi0.0: found w25q128, expected m25p80 [ 0.560000] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 0.560000] 5 tp-link partitions found on MTD device spi0.0 [ 0.570000] Creating 5 MTD partitions on "spi0.0": [ 0.570000] 0x000000000000-0x000000020000 : "u-boot" [ 0.580000] 0x000000020000-0x00000012e400 : "kernel" [ 0.590000] 0x00000012e400-0x000000ff0000 : "rootfs" [ 0.590000] mtd: device 2 (rootfs) set to be root filesystem [ 0.600000] 1 squashfs-split partitions found on MTD device rootfs [ 0.600000] 0x000000360000-0x000000ff0000 : "rootfs_data" [ 0.610000] 0x000000ff0000-0x000001000000 : "art" [ 0.620000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.620000] Realtek RTL8366RB ethernet switch driver version 0.2.4 [ 0.740000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK) [ 0.740000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found [ 0.930000] libphy: rtl8366rb: probed [ 1.250000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 1.250000] TCP: cubic registered [ 1.260000] NET: Registered protocol family 17 [ 1.260000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.280000] Bridge firewalling registered [ 1.280000] 8021q: 802.1Q VLAN Support v1.8 [ 1.290000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.300000] Freeing unused kernel memory: 224K (80368000 - 803a0000) [ 2.580000] init: Console is alive [ 2.580000] init: - watchdog - [ 4.160000] usbcore: registered new interface driver usbfs [ 4.170000] usbcore: registered new interface driver hub [ 4.170000] usbcore: registered new device driver usb [ 4.180000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.190000] ehci-platform: EHCI generic platform driver [ 4.200000] ehci-platform ehci-platform: EHCI Host Controller [ 4.200000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 4.210000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 4.240000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 4.240000] hub 1-0:1.0: USB hub found [ 4.250000] hub 1-0:1.0: 1 port detected [ 4.660000] init: - preinit - [ 5.410000] eth0: link up (1000Mbps/Full duplex) [ 5.440000] random: procd urandom read with 8 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 8.740000] jffs2: notice: (352) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.760000] mount_root: switching to jffs2 overlay [ 8.800000] eth0: link down [ 8.820000] procd: - early - [ 8.820000] procd: - watchdog - [ 9.620000] procd: - ubus - [ 10.630000] procd: - init - Please press Enter to activate this console. [ 11.560000] NET: Registered protocol family 10 [ 11.570000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.590000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 11.590000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 11.610000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.620000] nf_conntrack version 0.5.0 (449 buckets, 1796 max) [ 11.670000] xt_time: kernel timezone is -0000 [ 11.700000] cfg80211: Calling CRDA to update world regulatory domain [ 11.700000] cfg80211: World regulatory domain updated: [ 11.710000] cfg80211: DFS Master region: unset [ 11.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.730000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.740000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.750000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.750000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.760000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.770000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.780000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.870000] PPP generic driver version 2.4.2 [ 11.880000] NET: Registered protocol family 24 [ 11.980000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2 [ 11.990000] cfg80211: Calling CRDA for country: DE [ 11.990000] cfg80211: Regulatory domain changed to country: DE [ 12.000000] cfg80211: DFS Master region: ETSI [ 12.000000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.010000] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.020000] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 12.030000] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 12.040000] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 12.050000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 22.310000] eth0: link up (1000Mbps/Full duplex) [ 22.320000] device eth0.1 entered promiscuous mode [ 22.320000] device eth0 entered promiscuous mode [ 22.340000] br-lan: port 1(eth0.1) entered forwarding state [ 22.340000] br-lan: port 1(eth0.1) entered forwarding state [ 24.340000] br-lan: port 1(eth0.1) entered forwarding state [ 32.250000] random: nonblocking pool is initialized BusyBox v1.23.2 (2015-07-25 15:09:46 CEST) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- CHAOS CALMER (15.05, r46767) ----------------------------------------------------- * 1 1/2 oz Gin Shake with a glassful * 1/4 oz Triple Sec of broken ice and pour * 3/4 oz Lime Juice unstrained into a goblet. * 1 1/2 oz Orange Juice * 1 tsp. Grenadine Syrup ----------------------------------------------------- root@OpenWrt:/#
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
add support for tplink mr-13u. it's the same as mr10u. tried on my router and works fine.
all gpios are same as mr10u