server.properties

###########################################################################
#
# This is the E2 server's base configuration file
#
###########################################################################


##########################################################################
# Object Store
objectStoreProperties=rxconfig/Server/objectstore.properties


###########################################################################
# Log

# this is where we're going to log (FILE or DBMS)
logTo=DBMS

# For FILE logging, the URL to log to
logUrl=file:log.xml

###########################################################################
# Request Listener

# the local IP addresses to bind to using the format:
#   ip-address-1;ip-address-2;...;ip-address-n
# such as:
#   123.456.789.012;123.456.789.013
#
# default binding is to the first physical address located
# and loopback (127.0.0.1)
bindAddress=

# the local port number to bind. all incoming requests must go through
# this port number. 9992 is used as the default port number.
bindPort=9992


###########################################################################
# Thread Pool

# the minimum number of user threads we should have active at any time
# default = 10
userThreadMin=5

# the maximum number of user threads we can have active at any time
# use 0 to signify unlimited
# default = 0
userThreadMax=0

# the amount of time (in minutes) a thread may be idle for before
# shutting it down. Use 0 to signify no timeout
# default = 0
userThreadTimeout=1


###########################################################################
# Request Queue

# the maximum number of requests which may be placed in the queue
# 0 = disable the request queue
# -1 = unlimited queueing
requestQueueDepthMax=50

# the maximum amount of time to spend servicing a request, in seconds
#
# the request time limit can also be set on an application basis.
# Unlike threads and the request queue, the application may exceed the
# value specified on the server.
requestTimeMax=60

###########################################################################
# Console line width 

# default to 110
consoleColumns=110

###########################################################################
# Server and application root

# set this property to 'true' (any form of true with any case) to make request
# URL's case sensitive (server and application roots only). remove this 
# property or set it to anything else but 'true' to make requests case
# insensitive.
caseSensitiveUrl=true

###########################################################################
# Communities Enabled Property

# set the initial value for this property as 'yes', that means communities 
# are enabled by default. During the installation User will be provided with 
# a community selection panel immediately after product selection panels. 
# Depending on the user input the property will be reset.
communities_enabled=no

###########################################################################
# require unique field and fieldset names

# Set this property to 'true' (any form of true with any case) to require
# all field and fieldset names in an content editor to be unique. This includes
# any fields or fieldsets included from shared groups.  If required, then an
# application that violates this rule will fail to start.  Remove this property 
# or set it to anything else but 'true' to allow such an application to start, 
# with a warning written to the console and the log.  Only disable this feature 
# to temporarily provide backwards compatiblity to deployed applications, as 
# subtle problems may occur with this feature disabled.
requireUniqueFieldNames=true

# This setting disables the use of the IIS plugin related native shared memory 
# classes, which are almost never used and have been traced to cause a server failure
# while starting and stopping two servers running on the same machine at the same time.
# Refer to bug id: Rx-03-01-0050
forceSockets=true


###############################################################################
# Set this property to 'true' to allow character encodings to be modified in
# XSL stylesheets prior to transformation so they match the character output
# encoding as set in the workbench. This will modify the <xsl:output> encoding
# attribute and the charset of any content-type meta tag.
#
allowXslEncodingMods=true

###########################################################################
# Response close delay
#
# The response close delay in milliseconds, can be set by using
# server property "responseCloseDelay". Defaults to 10 milliseconds,
# and can never be less then 10 milliseconds. This helps deal with network
# latency issues and Microsoft's Internet Explorer. This has typically seen
# as Page Expired or Server Error 500 when adding a child item in a CE.
# Increasing the delay will help to mitigate the latency issue.
responseCloseDelay=10


###########################################################################
# Set this property to 'true' to restrict search results to user's logged 
# in community
#restrictUserSearchToCommunityContent=false

###########################################################################
# Set the cache behavior for caching the catalogged searchable fields
# which is used in the Search Dialog box. The possible values are:
#
#    CachePerJVM    - The cache will be persist for all applet instances, hence
#                     switching community or different HTML tab will not cause
#                     cache reload.
#                     This is the default behavior if the property is not defined.
#
#    CachePerApplet - The cache will be (lazily) reloaded per applet instance,
#
#    None           - Not to cache the searchable fields. This may be used when
#                     the client has insufficient RAM.
#
# The applet behavior between InternetExplorer, FireFox and Netscape browsers
#
#    InternetExplorer - There is one JVM per IE instance. A child IE window shares the same JVM with its parent.
#                       Switch community or another HTML tab then back to the "Content" tab will re-use the same
#                       CX applet instance. However, bring up the search dialog box in Active Assembly will create
#                       a new CX applet instance.
#
#    FireFox          - There is one JVM within a Windows OS. All FireFox instances share the same JVM.
#                       Switch community or another HTML tab then back to the "Content" tab will create new CX applet
#                       instance. 
#
#    Netscape         - There is one JVM within a Windows OS. All Netscape instances share the same JVM.
#
#CacheSearchableFieldsInApplet=CachePerJVM

################################################################################
# Define a set of estimate table statistics:
#    (table-name,number-of-row) pairs with ; (semicolon) delimiter.
#    Defaults to both RXPUBDOCS table with 1000000 rows.
#
#    This is used for the XML application to get estimate statistics for
#    huge tables where it may take a long time to get the table's indices and 
#    statistics with the JDBC API (java.sql.DatabaseMetaData.getIndexInfo(...)).
#
# This property has no effect if "enableEstimateStatistics=true" or "enableEstimateStatistics" is not defined
#estimateStatistics=RXPUBDOCS,1000000;

####################################################################################
# enableEstimateStatistics is set to "true" by default. If it is set to true, it will
# not attempt to get the actual statistics for all tables and views. 
# This behavior can be turned off if the property is set to "false". 
#enableEstimateStatistics=true

###############################################################################
# Determines whether or not the Browse Content Dialog will be displayed when 
# adding an inline link, inline image, inline template, or when adding
# slot content in the table editor. If set to 'false' the legacy search dialog
# will be used, if 'true' the Browse Content Dialog will display.
inlineSearchUsesContentBrowser=true

###############################################################################
# The absolution location for archived publishing log files. 
# If this is not specified, it is default to 
# "AppServer/server/rx/deploy/publogs.war/", which is relative to the 
# Rhythmyx installed directory.
# 
pubLogArchiveLocation=

#################################################################################
# Default Active Assembly mode:
#
#  0 = Show Icons and Borders
#  1 = No Icons and Borders displayed
#
defaultActiveAssemblyMode=1

#################################################################################
# This property controls what page the PSActionPanelServlet dispatches to. This
# is used by workflow notification and the Copy URL action in CX.
#
#   The following values are supported (case-insensitive):
#      actionPanel - will dispatch to the AP page, adding site and folder ids
#      activeAssembly - will dispatch to the AA page, adding site, folder and
#         variant ids
#			 
#   If not present or no value is specified, actionPanel is assumed.
#
notificationUrlTarget=activeAssembly

###############################################################################
# Setting this property to true will indicate that "true" inline template
# support is desired. In this mode inline templates are nolonger wrapped in
# the special div tags and the special attributes are added to the root element
# of the template. If the template is to be inline instead of block then the
# root element must be a span tag.
allowTrueInlineTemplates=false

###########################################################################
# Set this property to provide the default behavior for the Include site 
# in the link check box in the Browse Search dialog template panel and search panel.
# Any value other than true is treated as false.
#slotContentIncludeSiteDefaultValue=false

###########################################################################
# Set this property to provide the default behavior for the Include folder 
# in the link check box in the Browse Search dialog template panel and search panel.
# Any value other than true is treated as false.
#slotContentIncludeFolderDefaultValue=false

###############################################################################
# Setting this property to true will turn on item validation for public items
# (items in the public workflow state) during workflow transition. By default 
# this property is disabled.
#allowItemValidationOnPublicItems=false

###############################################################################
# Setting this property to true will force folder security to override assignee
# and admin workflow permissions. If an item is not in a single folder that has 
# write access for the assignee/admin then the assignee/admin will not be able 
# to edit or workflow the item. By default, this property is disabled if not 
# specified. However, it is enabled for new installed server.
folderSecurityOverridesWorkflowSecurity=true

###############################################################################
# This property is the threshold of when to push item cross site link updates
# into the queue for asynchronous processing. 50 is the default.
#crossSiteLinkQueueThreshold=50

###############################################################################
# This property enables or disables the asynchronous queue-ing of touching 
# public items by default its enabled.
#enableTouchQueue=true


###############################################################################
# This property is the threshold of when to stop unpublishing optimization.
# 1000 is the default.
#unpublishMaxThreshold=1000

###############################################################################
# The content list results are split based on chunk size for memory reasons.
# -1 indicates no splitting. The default is 1000.
#contentListChunkSize=1000


###############################################################################
# The maximum catalog and import page. Default to 0 if not specified.
# -1 indicates no limit.
catalogPageMax=-1
importPageMax=-1

###############################################################################
# Set import timeout per connection, in seconds.
# Default to 30
importTimeOut=30

###############################################################################
# Determines if the assignment type (of the workf-low) calculation 
# should be filtered by the community roles. 
# This feature is enabled if the value of this property is "true";
# otherwise it is disabled. Default to "true" if not specified.
#
# Note, this filtering feature is not enabled for users with "Admin" role of the item's workflow.
#
assignmentTypeCalculationFilterCommunityRoles=false

###############################################################################
# Define a list of accessibility roles. If a user is in one of the roles, then
# the user can only have access to the accessibility enabled pages in CM1 UI.  
#
# Note, if the property is not specified (or empty), then all user can all 
# pages (based on the permission of the user).
#
#accessibilityRoles=PercAccessibilityRole

###############################################################################
# Cloud license server url, this url will provide the module licenses and also
# used for verification of module licenses.
#
CLOUD_LICENSES_URL=https://licensing.percussion.com


###############################################################################
# Makes the widget builder active for the instance.
#
isWidgetBuilderActive=true

###############################################################################
#If this property is set to true, then it will process all the image src and 
#anchor hrefs, if they are local links then makes them managed links
#Setting this property to true will process all the links.
AUTO_MANAGE_LOCAL_PATHS=true

###############################################################################
#If set to true stack trace of error will be returned with rest call.  This is disabled
#by default for security.
sendErrorStackToClient=false

###############################################################################
#If set to true internal templates can set $sys.metadata hashmap to send metadata
#to the DTS metadata service. This includes the file and image widget asset. 
#by default for security.
publishNonPageMetadata=true

###############################################################################
# By default requests to the server can only come from the same host.  This 
# breaks attempts to test rest calls with rest test tools and browser plugins.
disableCrossSiteRequestForgeryCheck=false

###############################################################################
# How long before user notified that their session will timeout
clientSessionWarning=5

###############################################################################
# Forces all http requests that aren't from the local host to become https requests.
#
requireHTTPS=false

###############################################################################
# Enable legacy XML Assembler Cache only assembles XML Application page templates not velocity
useXMLAssemblerCache=false

###############################################################################
# Configures the width of thumbnail images.  Dimensions are calculated in 
# ImageAssetInputTranslation 
imageThumbnailWidth=50

###################################################################################
# Will require strict transport (https) and add the header for supported browsers
##################################################################################
requireStrictTransportSecurity=false

###############################################################################
# Sets the Strict-Transport-Security max-age parameter
stricttransportsecuritymaxage=300

######################################################################
# When enabled, content policy headers will be added to all requests 
######################################################################
requireContentSecurityPolicy=true

###############################################################################
# Sets the Content-Security-Policy HTTP response header
contentSecurityPolicy=default-src * data: http: https: *.percussion.com *.percussion.marketing *.percussion.services blob:;object-src * 'self' data\: blob\: http\: https\: 'unsafe-inline' 'unsafe-eval'; img-src * 'self' data: blob: http: https: 'unsafe-inline' 'unsafe-eval'; font-src * 'unsafe-inline' 'unsafe-eval' data: blob:; script-src * 'unsafe-inline' 'unsafe-eval' *.siteimprove.net data: blob:; style-src * 'unsafe-inline' 'unsafe-eval' data: blob:; frame-src * 'self' data: blob: https: http: *.percussion.com *.percussion.marketing *.percussion.services 'unsafe-inline' 'unsafe-eval'; frame-ancestors * 'self'  ;
install
#################################################################
# When enabled adds the XFrameOptions header to prevent external
# hosts from framing server urls
#################################################################
requireXFrameOptions=false

#################################################
# Specifies the allowed frame origins
#################################################
xFrameOptions=SAMEORIGIN

#####################################################################
# Indicates that the XSS protection headers are added to all requests
#####################################################################
requireXXSSProtection=true

##############################################################
# Indicates the value of the XXSS protection headers
#############################################################
xXSSProtection=1; mode=block

##########################################################################
# When true, the XContentType options header will be added to all requests
##########################################################################
requireXContentTypeOptions=true

#####################################################################
# Specifies the value of the XContent Type options header
####################################################################
xContentTypeOptions=nosniff

######################################################
# cacheControlRequired
#####################################################
cacheControlRequired=true

######################################################
# Cache control header
#####################################################
cacheControl=no-cache\='Set-Cookie, Set-Cookie2',must-revalidate

######################################################
# Auto tune cache max percentage of memory used for cache
#####################################################
autotuneCachePercentage=60

###################################################
# Enabled TLS Ciphers
##################################################
enabledCiphers=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_GCM_SHA384
#################################################################
# Sets the value of the public host name to use when generating links to
# content in the CMS.  If using a proxy in front of the CMS, this should
# be the host name of the proxy.  If using content security policy,
# this host name should be added to the CSP.
#################################################################
publicCmsHostname=
requestBehindProxy=false
proxyScheme=http
proxyPort=9992

#################################################################
# When true, will load all content of assets in one go
# When false, will load content as per the pagination rule.
#################################################################
enablePagination=false
#################################################################
# When true, the audit logging feature will be enabled, and
# system events instrumented for logging will be logged.
# Set to false to disable audit logging
#################################################################
enableAuditLogging=true

#################################################################
# The location of the Audit Log configuration file
#################################################################
auditLogConfigurationFile=perc-auditlog.properties

#################################################################
# when true will check the checksum of
# remote S3 bucket objects and compare with the checksum of the file being published.
# If they are the same then the delivery handler should skip the upload as there is no change.
# This should have a dramatic impact on publishing jobs to S3
#################################################################
optimizePublishWithChecksum=false

#################################################################
#  The property to define the broken link logic on publishing managed links
# is configurable based on this property. It can have anyone of the following 3 options.
#
#  brokenManagedLinkBehavior=
#  
#     1) deadLink - Broken links will be replaced by #
#     2) removeLink - Broken links will be removed completely
#     3) leaveLink - Link will be left broken
#################################################################
brokenManagedLinkBehavior=deadLink

#################################################################
#  The property to define Maximum no of users that can login in CMS at the same time.
#
# 0 - unlimited
#################################################################
maxUsersAllowed=0

#################################################################
#  The property to disable the Debug Tools (jsp)
#
# false = disabled
#################################################################
enableDebugTools=false

###############################################################################
#loginAutoComplete=on Allows the browser to still offer to save the password
#loginAutoComplete=off Forces the browser to not prompt to save the password
###############################################################################
loginAutoComplete=off

#################################################################
#  The property to control SameSite setting for the session cookie
#
# None, Strict, or Lax - if set to None https must be enabled
#################################################################
sameSiteCookieMode=Lax

###########################################################################
# allowedOrigins
#  The property to control the access control allowed origin
#  header
#
# Defaults to *.
# In order to more securely configure the CMS.
# Set to a comma seperated list of valid hostnames for the CMS.
# example:  https://cms.percussion.marketing, https://webeditor.my.edu, https://percussion.my.gov
##############################################################################
allowedOrigins=*

###########################################################################
# allowedMethods
# The property to control the HTTP methods that are allowed for CORS requests.
# Defaults to GET,POST,OPTIONS,HEAD,PUT,DELETE,PATCH
##############################################################################
allowedMethods=GET,POST,OPTIONS,HEAD,PUT,DELETE,PATCH

###########################################################################
#allowedHeaders
# The list of HTTP headers that are allowed on CORS requests
# Defaults to:
# Content-Type, Access-Control-Allow-Origin, Access-Control-Allow-Headers, Authorization, X-Requested-With, X-UA-Compatible, OWASP-CSRFTOKEN,User-Agent
##############################################################################
allowedHeaders=Content-Type, Access-Control-Allow-Origin, Access-Control-Allow-Headers, Authorization, X-Requested-With, X-UA-Compatible, OWASP-CSRFTOKEN,User-Agent

##############################################################################
#allowCredentials
# This must be set to false when allowedOrigins is set to *, so is set to false by default.
# When configuring an explicit list of allowedOrigins this should be set to true.
##############################################################################
allowCredentials=false

##############################################################################
#secureKeyRotationTime
# This is in trial phase. If value is 0, then rotation of key will not happen.
# If value is greater than 0, then rotation will happen after specified no of days.
# This must be set to no of DAYS when SecureKey needs to be rotated after Number of DAYS.
# eg 90, incase rotation needs to happen after 90 days, 0 in case rotation needs to happen as soon as jetty starts.
# Default is 0 for now as it is in Trial Phase
##############################################################################
secureKeyRotationTime=0

##############################################################################
# noCacheTemplates
# Explicity turn of caching of none, all or some templates.  Note that it is up to the
# template engine implementation to read this property.
#
# Valid values are:
# blank/missing - all templates will be cached.
# * - no templates will be cached.
# template1,template2 - A comma seperated list of template names that should never be cached.
##############################################################################
noCacheTemplates=

###################################################
# Sets the default buffer size in bytes that the
# server will use when copying files during publishing.
# Defaults to 1M
###################################################
fileCopyBufferSize=10448576


###################################################
# Sets the Summary Item query size to limit the summary cache
# Defaults to 10000
# to make it unlimited, can set value to -1
###################################################
MAX_SUMMARY_CACHE_SIZE=10000


###################################################
# When true the system will bypass the editor
# extensions that clean HTML content on user input.
# Note that this will bypass XSS/Code injection safety
# features that the html cleaners provide.
# Defaults to false
# Set to true to disable HTML cleaning when content is saved.
###################################################
disableHTMLCleaningExtensions=false

allowLinksToOrphans=true

###################################################
# This command will be used for taking screenshot using headless browser
# @file@ will be replaced with correct location of screenshot and
# @url@ will be replaced with url of page for screenshot.
# The path to executor needs to be replaced based on the browser that needs to be used.
#
# for Chrome command will be like:-
#"C:/Program Files/Google/Chrome/Application/chrome.exe" --headless --disable-gpu --screenshot=@@file@@ @@url@@
#
# For Firefox command will be like:-
#"C:/Program Files/Mozilla Firefox/firefox.exe" -headless -screenshot @@file@@ @@url@@
#
#For Edge command will be like:-
#"C:/Program Files (x86)/Microsoft/Edge/Application/msedge.exe" -headless -screenshot=@@file@@ @@url@@
#
# Example of chromium on Ubuntu linux
# /snap/bin/chromium --headless --disable-gpu --screenshot=@@file@@ @@url@@
#
###################################################
screenshotCommandLine=