Anduril 2 Cheat Sheet

Yet Another Anduril 2 Cheat Sheet

New Light Settings

auto-calibrate the temperature sensor, do a factory reset.

The process for this is:

1. Loosen tailcap
2. Hold button
3. Tighten tailcap
4. Keep holding button for about 4s

Advanced UI

off, 10H

Ramp config (new)

1. 1C: On
2. 3C: Switch to stepped ramp
3. Hold: Ramp to level 2 of 7
4. 10C: Activate manual memory and save current brightness
5. 10H item 2, then 10C: Set hybrid memory timer to 10 minutes
6. 3C: Switch back to smooth ramp

enable manual memory (old)

1. ramp light to desired brightness
2. 10c
3. in lock mode 2h will use this level

Enabled Auto Lockout

1. 4c to lock
2. 10h to configure
3. wait for blink, then let go
4. one click per minute (set to 10)

Check temp calibration

1. 3c to check voltage
2. 2c to check temp
3. 7h to set temp calibration

Configure Aux lights

1. from off, 7C/7h to configure
2. 4c to lock
3. 7C/7H to configure lock aux

Tint ramping/Channel switching

1. 9H to configure

Resources

Toykeepers setup

https://toykeeper.net/torches/fsm/anduril2/my-setup.txt