-
Notifications
You must be signed in to change notification settings - Fork 38
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Compiled from sources... openFPGALoader sometimes reports errors #17
Comments
This generally indicates that the connection between the pico and the FPGA isn't good enough to run at the JTAG frequency chosen. I have had good luck with braiding additional ground wires with the JTAG signals.
…________________________________
From: Grzegorz ***@***.***>
Sent: Sunday, October 15, 2023 1:07 PM
To: phdussud/pico-dirtyJtag ***@***.***>
Cc: Subscribed ***@***.***>
Subject: [phdussud/pico-dirtyJtag] Compiled from sources... openFPGALoader sometimes reports errors (Issue #17)
hi,
Compiled from sources... sometimes reports errors
SDK 1.5.1 default configuration BOARD_TYPE BOARD PICO USB_CDC_UART_BRIDGE 0
***@***.***:/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detect
Jtag frequency : requested 6000000Hz -> real 6000000Hz
JTAG init failed with: Unknown device with IDCODE: 0xa0811043 (manufacturer: 0x021 (lattice), part: 0x04 vers: 0xa
***@***.***:/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detect
Jtag frequency : requested 6000000Hz -> real 6000000Hz
JTAG init failed with: Unknown device with IDCODE: 0xf0001043 (manufacturer: 0x021 (lattice), part: 0x00 vers: 0xf
***@***.***:/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detect
Jtag frequency : requested 6000000Hz -> real 6000000Hz
JTAG init failed with: Unknown device with IDCODE: 0xf8000043 (manufacturer: 0x021 (lattice), part: 0x40 vers: 0xf
***@***.***:/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detect
Jtag frequency : requested 6000000Hz -> real 6000000Hz
index 0:
idcode 0x1111043
manufacturer lattice
family ECP5
model LFE5UM-25
irlength 8
—
Reply to this email directly, view it on GitHub<#17>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABVQKX5XDAVDYDXTK46PB23X7Q7BHANCNFSM6AAAAAA6BHKU2Y>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
|
thx.. it started working properly, it's possible that there was a problem with the connecting cables... best regards |
closing this one |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
hi,
Compiled from sources... sometimes reports errors
SDK 1.5.1 default configuration BOARD_TYPE BOARD PICO USB_CDC_UART_BRIDGE 0
root@cnc-centrum:
/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detect/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detectJtag frequency : requested 6000000Hz -> real 6000000Hz
JTAG init failed with: Unknown device with IDCODE: 0xa0811043 (manufacturer: 0x021 (lattice), part: 0x04 vers: 0xa
root@cnc-centrum:
Jtag frequency : requested 6000000Hz -> real 6000000Hz
JTAG init failed with: Unknown device with IDCODE: 0xf0001043 (manufacturer: 0x021 (lattice), part: 0x00 vers: 0xf
root@cnc-centrum:
/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detect/pico-dirtyJtag/build# openFPGALoader --cable dirtyJtag --detectJtag frequency : requested 6000000Hz -> real 6000000Hz
JTAG init failed with: Unknown device with IDCODE: 0xf8000043 (manufacturer: 0x021 (lattice), part: 0x40 vers: 0xf
root@cnc-centrum:
Jtag frequency : requested 6000000Hz -> real 6000000Hz
index 0:
idcode 0x1111043
manufacturer lattice
family ECP5
model LFE5UM-25
irlength 8
The text was updated successfully, but these errors were encountered: