Print area problem

[Barrby]

Your Operating System: Windows 10
Your Web Browser: Chrome, but realised in "installed" Photopea
The problem happens in the Incognito Mode, too:

This must be done to see the problem

1. Go to www.photopea.com
2. Open a photo
3. Crop the picture from all sides
4. Save as PSD
5. Open Soubor - Tisk (File - Print)
6. Set "Add margin" to 0 In (BTW, this dialog part isn't translated into czech and it's in inches only - use above units or add "mm" please)
7. It looks fine in Preview, but on the printed picture the left side is cut (6 mm) and top side is cut (4 mm).
8. Set "Add margin" to e.g. 0.5 In
9. Preview picture and also printed picture are expanded! - the parts of picture, which I croped in step 3. apears again on the top and on the right side!!! and it's also printed like this.
   This is the main issue.

And there is a second issue:
It means, the picture isn't saved as I wish! There are still parts, which I want to crop and somebody can unhide/restore it!!??

[photopea]

When you use the Crop tool, enable "Delete cropped pixels" at the top.

But I think it is not related to Photopea. Your computer can not print PSD files correctly. These PSD files could be created by any program.

[Barrby]

OK, thanks for the info about the "Delete cropped pixels" option. But if I don't delete them, the problem sustains there.
For printing PSD you need three things:

1. hardware, my computer
2. software, Photopea
3. picture, my JPG opened in Photopea and automaticaly converted by Photopea into PSD
   And PHOTOPEA is that printing tool, which works badly with the picture margins and Photopea is that software which sends data to the printer.
   Sorry, but this is definitelly related to Photopea!

[photopea]

When you open a jpg in Photopea and crop it, what do you do next to print it?

…

On Thursday 9 May 2024, Barrby ***@***.***> wrote: OK, thanks for the info about the "Delete cropped pixels" option. But if I don't delete them, the problem sustains there. For printing PSD you need three things: 1. hardware, my computer 2. software, Photopea 3. picture, my JPG opened in Photopea and automaticaly converted by Photopea into PSD And PHOTOPEA is that printing tool, which works badly with the picture margins and Photopea is that software which sends data to the printer. Sorry, but this is definitelly related to Photopea! — Reply to this email directly, view it on GitHub <#6729 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADZXMZWKMML7WHLOUEYCWVDZBOOHRAVCNFSM6AAAAABHIPT4IWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBSHE3TSNZZG4> . You are receiving this because you commented.Message ID: ***@***.***>

[Barrby]

Když už si píšeme takhle mimo po mailu, můžeme pokračovat v češtině?   BTW, pořád nevím s kým vlastně komunikuji ... jestli jste přímo autor, tak jste, pokud vím, Čech    Zjistil jsem, že se to chová pro různé zdrojové obrázky různě: Když dám tisk s okrajem 0 in, obrázek je na tiskárně oříznutý o netisknutelnou oblast tiskárny, proto musím při tisku ve Photopea nějaký okraj nastavit, abych dostal obrázek celý. A je jedno, jestli ten obrázek po cropnutí uložím nebo ne, můžu dát rovnou Tisk ...   1. Pro Crop P.jpg (vyrobeno ve Photopea) je to OK -> otevřu ho (udělá se z něj PSD), cropnu modrou oblast, dám tisk s okrajem např. 1 in a náhled je OK, jenom modrá oblast. 2. Pro Crop M.jpg (vyrobeno v Malování) ani pro Sovice sněžní.jpg to není OK -> otevřu je, cropnu, dám tisk s okrajem a nahoře a vpravo se přidá oříznutý obrázek - viz Photopea Tisk.png   Jestli chcete, zavolejte mi a já vám to popíšu nebo i ukážu po Teamsech ...   S pozdravem   Pavel Barbořík tel. +420 604 22 77 29  

______________________________________________________________

Od: "Photopea" ***@***.***> Komu: "photopea/photopea" ***@***.***> Datum: 09.05.2024 19:30 Předmět: Re: [photopea/photopea] Print area problem (Issue #6729)

  When you open a jpg in Photopea and crop it, what do you do next to print it? On Thursday 9 May 2024, Barrby ***@***.***> wrote: OK, thanks for the info about the "Delete cropped pixels" option. But if I don't delete them, the problem sustains there. For printing PSD you need three things: 1. hardware, my computer 2. software, Photopea 3. picture, my JPG opened in Photopea and automaticaly converted by Photopea into PSD And PHOTOPEA is that printing tool, which works badly with the picture margins and Photopea is that software which sends data to the printer. Sorry, but this is definitelly related to Photopea! — Reply to this email directly, view it on GitHub <#6729 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADZXMZWKMML7WHLOUEYCWVDZBOOHRAVCNFSM6AAAAABHIPT4IWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBSHE3TSNZZG4> . You are receiving this because you commented.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#6729 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATIGGBKJU65UKGBV3XILVR3ZBOXERAVCNFSM6AAAAABHIPT4IWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBTGEYDGNRSHA>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[photopea]

Dobrý den,

takže ve Photopea.com mačkáte Soubor - Tisk? Měl by se vám zobrazit náhled jako PDF soubor. Říkáte, že po vytištění PDF to vypadá jinak, než v náhledu PDF? Můžet poskytnout nějaké screenshoty? Prosím, neodpovídejte po mailu, ale na webové stránce github.com