fmriprep adapts its pipeline depending on what data and metadata are
available and are used as the input.
For example, slice timing correction will be
performed only if the SliceTiming metadata field is found for the input
dataset.
A (very) high-level view of the simplest pipeline (for a single-band dataset with only one task, single-run, with no slice-timing information nor fieldmap acquisitions) is presented below:
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.base import init_single_subject_wf
wf = init_single_subject_wf(subject_id='test',
name='single_subject_wf',
task_id='',
longitudinal=False,
t2s_coreg=False,
omp_nthreads=1,
freesurfer=True,
reportlets_dir='.',
output_dir='.',
bids_dir='.',
skull_strip_template='OASIS',
template='MNI152NLin2009cAsym',
output_spaces=['T1w', 'fsnative',
'template', 'fsaverage5'],
medial_surface_nan=False,
cifti_output=False,
ignore=[],
debug=False,
low_mem=False,
anat_only=False,
hires=True,
use_bbr=True,
bold2t1w_dof=9,
fmap_bspline=False,
fmap_demean=True,
use_syn=True,
force_syn=True,
template_out_grid='native',
use_aroma=False,
aroma_melodic_dim=None,
ignore_aroma_err=False)
:mod:`fmriprep.workflows.anatomical.init_anat_preproc_wf`
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.anatomical import init_anat_preproc_wf
wf = init_anat_preproc_wf(omp_nthreads=1,
reportlets_dir='.',
output_dir='.',
template='MNI152NLin2009cAsym',
output_spaces=['T1w', 'fsnative',
'template', 'fsaverage5'],
skull_strip_template='OASIS',
freesurfer=True,
longitudinal=False,
debug=False,
hires=True,
num_t1w=1)
The anatomical sub-workflow begins by constructing an average image by :ref:`conforming <conformation>` all found T1w images to RAS orientation and a common voxel size, and, in the case of multiple images, averages them into a single reference template (see Longitudinal processing).
Then, the T1w image/average is skull-stripped using ANTs' antsBrainExtraction.sh,
which is an atlas-based brain extraction workflow.
Brain extraction
Once the brain mask is computed, FSL fast is utilized for brain tissue segmentation.
Brain tissue segmentation.
Finally, spatial normalization to MNI-space is performed using ANTs' antsRegistration
in a multiscale, mutual-information based, nonlinear registration scheme.
In particular, spatial normalization is done using the ICBM 2009c Nonlinear
Asymmetric template (1×1×1mm) [Fonov2011]_.
When processing images from patients with focal brain lesions (e.g. stroke, tumor
resection), it is possible to provide a lesion mask to be used during spatial
normalization to MNI-space [Brett2001]_.
ANTs will use this mask to minimize warping of healthy tissue into damaged
areas (or vice-versa).
Lesion masks should be binary NIfTI images (damaged areas = 1, everywhere else = 0)
in the same space and resolution as the T1 image, and follow the naming convention specified in
BIDS Extension Proposal 3: Common Derivatives
(e.g. sub-001_T1w_label-lesion_roi.nii.gz).
This file should be placed in the sub-*/anat directory of the BIDS dataset
to be run through fmriprep.
Animation showing T1w to MNI normalization
In the case of multiple sessions, T1w images are merged into a single template
image using FreeSurfer's `mri_robust_template`_.
This template may be unbiased, or equidistant from all source images, or
aligned to the first image (determined lexicographically by session label).
For two images, the additional cost of estimating an unbiased template is
trivial and is the default behavior, but, for greater than two images, the cost
can be a slowdown of an order of magnitude.
Therefore, in the case of three or more images, fmriprep constructs
templates aligned to the first image, unless passed the --longitudinal
flag, which forces the estimation of an unbiased template.
Note
The preprocessed T1w image defines the T1w space.
In the case of multiple T1w images, this space may not be precisely aligned
with any of the original images.
Reconstructed surfaces and functional datasets will be registered to the
T1w space, and not to the input images.
:mod:`fmriprep.workflows.anatomical.init_surface_recon_wf`
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.anatomical import init_surface_recon_wf
wf = init_surface_recon_wf(omp_nthreads=1,
hires=True)
fmriprep uses FreeSurfer_ to reconstruct surfaces from T1w/T2w
structural images.
If enabled, several steps in the fmriprep pipeline are added or replaced.
All surface preprocessing may be disabled with the --fs-no-reconall flag.
If FreeSurfer reconstruction is performed, the reconstructed subject is placed in
<output dir>/freesurfer/sub-<subject_label>/ (see :ref:`fsderivs`).
Surface reconstruction is performed in three phases.
The first phase initializes the subject with T1w and T2w (if available)
structural images and performs basic reconstruction (autorecon1) with the
exception of skull-stripping.
Skull-stripping is skipped since the brain mask :ref:`calculated previously
<t1preproc_steps>` is injected into the appropriate location for FreeSurfer.
For example, a subject with only one session with T1w and T2w images
would be processed by the following command:
$ recon-all -sd <output dir>/freesurfer -subjid sub-<subject_label> \
-i <bids-root>/sub-<subject_label>/anat/sub-<subject_label>_T1w.nii.gz \
-T2 <bids-root>/sub-<subject_label>/anat/sub-<subject_label>_T2w.nii.gz \
-autorecon1 \
-noskullstrip
The second phase imports the brainmask calculated in the T1w/T2w preprocessing sub-workflow. The final phase resumes reconstruction, using the T2w image to assist in finding the pial surface, if available. See :py:meth:`~fmriprep.workflows.anatomical.init_autorecon_resume_wf` for details.
Reconstructed white and pial surfaces are included in the report.
Surface reconstruction (FreeSurfer)
If T1w voxel sizes are less than 1mm in all dimensions (rounding to nearest
.1mm), `submillimeter reconstruction`_ is used, unless disabled with
--no-submm-recon.
In order to bypass reconstruction in fmriprep, place existing reconstructed
subjects in <output dir>/freesurfer prior to the run.
fmriprep will perform any missing recon-all steps, but will not perform
any steps whose outputs already exist.
lh.midthickness and rh.midthickness surfaces are created in the subject
surf/ directory, corresponding to the surface half-way between the gray/white
boundary and the pial surface.
The smoothwm, midthickness, pial and inflated surfaces are also
converted to GIFTI_ format and adjusted to be compatible with multiple software
packages, including FreeSurfer and the `Connectome Workbench`_.
Typically, the original brain mask calculated with antsBrainExtraction.sh
will contain some innaccuracies including small amounts of MR signal from
outside the brain.
Based on the tissue segmentation of FreeSurfer (located in mri/aseg.mgz)
and only when the :ref:`Surface Processing <workflows_surface>` step has been
executed, FMRIPREP replaces the brain mask with a refined one that derives
from the aseg.mgz file as described in
:mod:`fmriprep.interfaces.freesurfer.grow_mask`.
:mod:`fmriprep.workflows.bold.base.init_func_preproc_wf`
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.bold import init_func_preproc_wf
wf = init_func_preproc_wf('/completely/made/up/path/sub-01_task-nback_bold.nii.gz',
omp_nthreads=1,
ignore=[],
freesurfer=True,
reportlets_dir='.',
output_dir='.',
template='MNI152NLin2009cAsym',
output_spaces=['T1w', 'fsnative',
'template', 'fsaverage5'],
medial_surface_nan=False,
cifti_output=False,
debug=False,
low_mem=False,
use_bbr=True,
t2s_coreg=False,
bold2t1w_dof=9,
fmap_bspline=True,
fmap_demean=True,
use_syn=True,
force_syn=True,
template_out_grid='native',
use_aroma=False,
aroma_melodic_dim=None,
ignore_aroma_err=False)
Preprocessing of :abbr:`BOLD (blood-oxygen level-dependent)` files is split into multiple sub-workflows described below.
In the case of multi-echo :abbr:`BOLD (blood-oxygen level-dependent)` data, each echo is processed independently. The two exceptions to this occur for :ref:`head-motion estimation <bold_hmc>` and :ref:`T2* map creation <bold_t2s>`.
For the :ref:`head-motion estimation workflow <bold_hmc>`, only the first echo is submitted as this echo is expected to have the highest contrast between gray and white matter. For :ref:`T2* map creation <bold_t2s>`, all echos are considered jointly to look at voxel-wise T2* decay.
:mod:`fmriprep.workflows.bold.util.init_bold_reference_wf`
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.bold import init_bold_reference_wf
wf = init_bold_reference_wf(omp_nthreads=1)
This workflow estimates a reference image for a :abbr:`BOLD (blood-oxygen level-dependent)` series. When T1-saturation effects ("dummy scans" or non-steady state volumes) are detected, they are averaged and used as reference due to their superior tissue contrast. Otherwise, a median of motion corrected subset of volumes is used.
The reference image is then used to calculate a brain mask for the :abbr:`BOLD (blood-oxygen level-dependent)` signal using the :mod:`fmriprep.workflows.bold.util.init_enhance_and_skullstrip_bold_wf`. Further, the reference is fed to the :ref:`head-motion estimation workflow <bold_hmc>` and the :ref:`registration workflow to map BOLD series into the T1w image of the same subject <bold_reg>`.
Calculation of a brain mask from the BOLD series.
:mod:`fmriprep.workflows.bold.hmc.init_bold_hmc_wf`
.. workflow::
:graph2use: colored
:simple_form: yes
from fmriprep.workflows.bold import init_bold_hmc_wf
wf = init_bold_hmc_wf(
mem_gb=1,
omp_nthreads=1)
Using the previously :ref:`estimated reference scan <bold_ref>`,
FSL mcflirt is used to estimate head-motion.
As a result, one rigid-body transform with respect to
the reference image is written for each :abbr:`BOLD (blood-oxygen level-dependent)`
time-step.
Additionally, a list of 6-parameters (three rotations,
three translations) per time-step is written and fed to the
:ref:`confounds workflow <bold_confounds>`.
For a more accurate estimation of head-motion, we calculate its parameters
before any time-domain filtering (i.e. :ref:`slice-timing correction <bold_stc>`),
as recommended in [Power2017]_.
:mod:`fmriprep.workflows.bold.stc.init_bold_stc_wf`
.. workflow::
:graph2use: colored
:simple_form: yes
from fmriprep.workflows.bold import init_bold_stc_wf
wf = init_bold_stc_wf(
metadata={'RepetitionTime': 2.0,
'SliceTiming': [0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9]},
)
If the SliceTiming field is available within the input dataset metadata,
this workflow performs slice time correction prior to other signal resampling
processes.
Slice time correction is performed using AFNI 3dTShift.
All slices are realigned in time to the middle of each TR.
Slice time correction can be disabled with the --ignore slicetiming
command line argument.
If a :abbr:`BOLD (blood-oxygen level-dependent)` series has fewer than
5 usable (steady-state) volumes, slice time correction will be disabled
for that run.
:mod:`fmriprep.workflows.bold.t2s.init_bold_t2s_wf`
.. workflow::
:graph2use: colored
:simple_form: yes
from fmriprep.workflows.bold import init_bold_t2s_wf
wf = init_bold_t2s_wf(
bold_echos=['echo1', 'echo2', 'echo3'],
echo_times=[13.6, 29.79, 46.59],
mem_gb=3,
omp_nthreads=1)
If the --t2s-coreg command line argument is supplied with multi-echo
:abbr:`BOLD (blood-oxygen level-dependent)` data, a T2* map is generated.
This T2* map is then used in place of the :ref:`BOLD reference image <bold_ref>`
to ref:register the BOLD series to the T1w image of the same subject <bold_reg>.
:mod:`fmriprep.workflows.fieldmap.base.init_sdc_wf`
Applying susceptibility-derived distortion correction, based on fieldmap estimation.
One of the major problems that affects :abbr:`EPI (echo planar imaging)` data is the spatial distortion caused by the inhomogeneity of the field inside the scanner. Please refer to :ref:`sdc` for details on the available workflows.
:mod:`fmriprep.workflows.bold.resampling.init_bold_preproc_trans_wf`
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.bold import init_bold_preproc_trans_wf
wf = init_bold_preproc_trans_wf(mem_gb=3, omp_nthreads=1)
A new preproc :abbr:`BOLD (blood-oxygen level-dependent)` series is generated from the slice-timing corrected or the original data (if :abbr:`STC (slice-timing correction)` was not applied) in the original space. All volumes in the :abbr:`BOLD (blood-oxygen level-dependent)` series are resampled in their native space by concatenating the mappings found in previous correction workflows (:abbr:`HMC (head-motion correction)` and :abbr:`SDC (susceptibility-derived distortion correction)` if excecuted) for a one-shot interpolation process. Interpolation uses a Lanczos kernel.
:mod:`fmriprep.workflows.bold.registration.init_bold_reg_wf`
.. workflow::
:graph2use: orig
:simple_form: yes
from fmriprep.workflows.bold import init_bold_reg_wf
wf = init_bold_reg_wf(
freesurfer=True,
mem_gb=1,
omp_nthreads=1,
use_bbr=True,
bold2t1w_dof=9)
The reference :abbr:`EPI (echo-planar imaging)` image of each run is aligned
by the bbregister routine to the reconstructed subject using the gray/white
matter boundary (FreeSurfer's ?h.white surfaces).
If FreeSurfer processing is disabled, FSL flirt is run with the
:abbr:`BBR (boundary-based registration)` cost function, using the
fast segmentation to establish the gray/white matter boundary. After :abbr:`BBR (boundary-based registration)` is run, the resulting affine transform will be compared to the initial transform found by FLIRT. Excessive deviation will result in rejecting the BBR refinement and accepting the original, affine registration.
:mod:`fmriprep.workflows.bold.resampling.init_bold_mni_trans_wf`
.. workflow::
:graph2use: colored
:simple_form: yes
from fmriprep.workflows.bold import init_bold_mni_trans_wf
wf = init_bold_mni_trans_wf(
template='MNI152NLin2009cAsym',
mem_gb=1,
omp_nthreads=1,
template_out_grid='native')
This sub-workflow concatenates the transforms calculated upstream (see Head-motion estimation, Susceptibility Distortion Correction (SDC) --if fieldmaps are available--, EPI to T1w registration, and a T1w-to-MNI transform from T1w/T2w preprocessing) to map the :abbr:`EPI (echo-planar imaging)` image to standard MNI space. It also maps the T1w-based mask to MNI space.
Transforms are concatenated and applied all at once, with one interpolation (Lanczos) step, so as little information is lost as possible.
The output space grid can be specified using the template_out_grid argument.
This option accepts the following (str) values:
'native': the original resolution of the BOLD image will be used.'1mm': uses the 1:math:times`1:math:times`1 [mm] version of the template.'2mm': uses the 2:math:times`2:math:times`2 [mm] version of the template.- Path to arbitrary reference file: the output will be resampled on a grid with same resolution as this reference.
:mod:`fmriprep.workflows.bold.resampling.init_bold_surf_wf`
.. workflow::
:graph2use: colored
:simple_form: yes
from fmriprep.workflows.bold import init_bold_surf_wf
wf = init_bold_surf_wf(
mem_gb=1,
output_spaces=['T1w', 'fsnative',
'template', 'fsaverage5'],
medial_surface_nan=False)
If FreeSurfer processing is enabled, the motion-corrected functional series (after single shot resampling to T1w space) is sampled to the surface by averaging across the cortical ribbon. Specifically, at each vertex, the segment normal to the white-matter surface, extending to the pial surface, is sampled at 6 intervals and averaged.
Surfaces are generated for the "subject native" surface, as well as transformed to the
fsaverage template space.
All surface outputs are in GIFTI format.
:mod:`fmriprep.workflows.bold.confounds.init_bold_confs_wf`
.. workflow::
:graph2use: colored
:simple_form: yes
from fmriprep.workflows.bold.confounds import init_bold_confs_wf
wf = init_bold_confs_wf(
name="discover_wf",
mem_gb=1,
metadata={"RepetitionTime": 2.0,
"SliceTiming": [0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9]})
Given a motion-corrected fMRI, a brain mask, mcflirt movement parameters and a
segmentation, the discover_wf sub-workflow calculates potential
confounds per volume.
Calculated confounds include the mean global signal, mean tissue class signal,
tCompCor, aCompCor, Frame-wise Displacement, 6 motion parameters, DVARS, and, if
the --use-aroma flag is enabled, the noise components identified by ICA-AROMA
(those to be removed by the "aggressive" denoising strategy).
The number of ICA-AROMA components depends on a dimensionality estimate
made by MELODIC.
For datasets with a very short TR and a large number of timepoints, this may
result in an unusually high number of components.
In such cases, it may be useful to specify the number of components to be
extracted with --aroma-melodic-dimensionality.
Note: non-aggressive AROMA denoising is a fundamentally different procedure from its "aggressive" counterpart and cannot be performed only by using a set of noise regressors (a separate GLM with both noise and signal regressors needs to be used). Therefore instead of regressors FMRIPREP produces non-aggressive denoised 4D NIFTI files in the MNI space:
*bold_space-MNI152NLin2009cAsym_variant-smoothAROMAnonaggr_brainmask.nii.gz
Additionally, the MELODIC mix and noise component indices will
be generated, so non-aggressive denoising can be manually performed in the T1w space with fsl_regfilt, e.g.:
fsl_regfilt -i sub-<subject_label>_task-<task_id>_bold_space-T1w_preproc.nii.gz \
-f $(cat sub-<subject_label>_task-<task_id>_bold_AROMAnoiseICs.csv) \
-d sub-<subject_label>_task-<task_id>_bold_MELODICmix.tsv \
-o sub-<subject_label>_task-<task_id>_bold_space-<space>_AromaNonAggressiveDenoised.nii.gz
A visualization of the AROMA component classification is also included in the HTML reports.
Maps created with maximum intensity projection (glass brain) with a black brain outline. Right hand side of each map: time series (top in seconds), frequency spectrum (bottom in Hertz). Components classified as signal in green; noise in red.