Skip to content

prenticedavid/MCUFRIEND_kbv

master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Code

#MCUFRIEND_kbv Library for Uno 2.4, 2.8, 3.5, 3.6, 3.95 inch mcufriend Shields

  1. The Arduino Library Manager should find and install MCUFRIEND_kbv library

  2. Install the Adafruit_GFX library if not already in your User libraries.

  3. Insert your Mcufriend style display shield into UNO. Only 28-pin shields are supported.

  4. Build any of the Examples from the File->Examples->Mcufriend_kbv menu. e.g.

graphictest_kbv.ino: shows all the methods.

LCD_ID_readreg.ino: diagnostic check to identify unsupported controllers.

MCUFRIEND_kbv inherits all the methods from the Adafruit_GFX class: https://learn.adafruit.com/adafruit-gfx-graphics-library/overview and Print class: https://www.arduino.cc/en/Serial/Print

The only "new" methods are hardware related: vertScroll(), readGRAM(), readPixel(), setAddrWindow(), pushColors(), readID(), begin()

readReg(), pushCommand() access the controller registers

The File layout changed with v2.9.3. If replacing a pre-v2.9.3 library: Please leave IDE. Delete the existing MCUFRIEND_kbv folder. Start the IDE. Install from Library Manager.

HOW TO INSTALL AND USE: is now in "mcufriend_how_to.txt"

CHANGE HISTORY: is now in "mcufriend_history.txt"

About

MCUFRIEND_kbv Library for Uno 2.4, 2.8, 3.5, 3.6, 3.95 inch mcufriend Shields

Resources

License

Stars

Watchers

Forks

Packages

No packages published