Replies: 3 comments
-
Are you double clicking as required?
…On Thu, 28 Apr 2022 at 14:53, Ronald ***@***.***> wrote:
Hi, I have built a miniDexed with a ky-040, lcd1602 and pcm5102 board on a
raspi 2b
Everything works, except the switch. Encoder moves through the menu, but
button press does nothing, at least most of the time. Occasionally a press
is registered but I can’t figure out when or why.
The switch is ok (press to zero), tried with separate switches, wire to
ground, moving input to other gpio, nothing works.
Do I miss something, or is this a known issue (on a 2b)?
—
Reply to this email directly, view it on GitHub
<#186>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AMFJTAIXP6JADMKUSAARXQTVHJ32BANCNFSM5USEVDDA>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
0 replies
Answer selected by
probonopd
-
Wow, this is embarrassing. Double clicking does the trick. don’t be like Ronald, rtfm. thanks |
Beta Was this translation helpful? Give feedback.
0 replies
-
It's ok, I thought the same for a few minutes after building mine. A quick read of the manual fixed it for me. There is a request to reverse it so one click is enter and double click is back, which is what I would prefer. |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hi, I have built a miniDexed with a ky-040, lcd1602 and pcm5102 board on a raspi 2b
Everything works, except the switch. Encoder moves through the menu, but button press does nothing, at least most of the time. Occasionally a press is registered but I can’t figure out when or why.
The switch is ok (press to zero), tried with separate switches, wire to ground, moving input to other gpio, nothing works.
Do I miss something, or is this a known issue (on a 2b)?
Beta Was this translation helpful? Give feedback.
All reactions