Update vpsandhotwallet.rst

masternodes/masternodes_basic/vpsandhotwallet.rst

@@ -139,7 +139,7 @@ Download and Configure the Liberty Hot wallet
 
 1. Install the Liberty Hot wallet on the VPS.  Download and unpack the Liberty wallet binaries by running the following commands **one at a time**::
 
-	wget https://s3.amazonaws.com/liberty-builds/5.0.58.0/linux-x64.tar.gz
+	wget https://s3.amazonaws.com/liberty-builds/5.0.61.0/linux-x64.tar.gz
 	sudo tar xvzf linux-x64.tar.gz -C /usr/local/bin/
 	
 .. _startservice_vpsandhotwallet:
@@ -180,7 +180,6 @@ Download and Configure the Liberty Hot wallet
 	listen=1 
 	daemon=1
 	masternode=1
-	externalip=<public_mn_ip_address_here>:10417 
 	masternodeaddr=<public_mn_ip_address_here>
 	bind=<public_mn_ip_address_here>
 	masternodeprivkey=<your_masternode_genkey_output>
@@ -189,7 +188,6 @@ Download and Configure the Liberty Hot wallet
 * You will need to generate the rpcpassword yourself.
 * Use the **ifconfig** command, on the Linux VPS, to find out your Linux VPS IP address.  It is normally the address listed after the **eth0** interface after the word **inet addr:** 
 * Save your Linux VPS IP address as we are going to use this IP again in the Cold wallet setup
-* Update the variable after **externalip=** with your Linux VPS IP.  Ensure that there are no spaces between the IP address and the port **:10417**
 * Update the variable after **masternodeaddr=** with your Linux VPS IP
 * Update the variable after **bind=** with your Linux VPS IP
 * Update the variable after **masternodeprivkey=** with your MasterNode private key (GenKey)
@@ -219,7 +217,6 @@ Download and Configure the Liberty Hot wallet
 	listen=1 
 	daemon=1 
 	masternode=1
-	externalip=199.247.10.25:10417 
 	masternodeaddr=199.247.10.25
 	bind=199.247.10.25
 	masternodeprivkey=87LBTcfgkepEddWNFrJcut76rFp9wQG6rgbqPhqHWGvy13A9hJK 
@@ -252,4 +249,4 @@ Verify the Hot wallet is synchronizing with the blockchain
 * NOTE: If your block count is **NOT** increasing then you will need to stop the Hot wallet with the **liberty-cli stop** command and then reindex with the **libertyd -reindex** command. 
 * **NOTE: If you did the reindex and you continue to have issues with establishing connections then check that the VPS provider external firewall is setup correctly to allow TCP port 10417 from anywhere.  If that is not setup correctly then you will not be able to proceed beyond this step.**
 
-**If your block count is indeed increasing, then you can proceed to the next step to setup the Cold wallet.**
+**If your block count is indeed increasing, then you can proceed to the next step to setup the Cold wallet.**