Update SLA code to use API v.1 and CONNECT settings

config.m1.js

@@ -9,7 +9,7 @@ module.exports = (env, args) => {
 
         WITH_STORAGES: ["local", "usb"],
         WITH_FILES: true,
-        WITH_SETTINGS: false,
+        WITH_SETTINGS: true,
         WITH_CONTROLS: false,
         WITH_REMOTE_UPLOAD: true,
         WITH_START_PRINT_AFTER_UPLOAD: true,

config.sl1.js

@@ -9,12 +9,13 @@ module.exports = (env, args) => {
 
         WITH_STORAGES: ["local", "usb"],
         WITH_FILES: true,
-        WITH_SETTINGS: false,
+        WITH_SETTINGS: true,
         WITH_CONTROLS: false,
         WITH_REMOTE_UPLOAD: true,
         WITH_START_PRINT_AFTER_UPLOAD: true,
         WITH_LOGS: false,
         WITH_FONT: false,
+        WITH_V1_API: true,
         ...env,
     };
     return webpackConfig(config, args);

src/locales/c.json

@@ -109,9 +109,13 @@
   "msg.sysupgrade.remark": "",
   "msg.sysupgrade.title": "",
   "msg.sysupgrade.wait-for-printer": "",
+  "ntf.calibration-error": "",
   "ntf.camera-config-success": "",
   "ntf.camera-suc": "",
   "ntf.error": "",
+  "ntf.low-resin.message": "",
+  "ntf.low-resin.title": "",
+  "ntf.n-calibrated": "",
   "ntf.settings-suc": "",
   "ntf.success": "",
   "ntf.upld-start": "",

src/locales/source/cs.json

@@ -272,5 +272,8 @@
   "btn.upgrade": "Aktualizovat",
   "conn.error_status": "Chyba",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "",
+  "ntf.calibration-error": "",
+  "ntf.low-resin.message": "",
+  "ntf.low-resin.title": ""
 }

src/locales/source/de.json

@@ -286,5 +286,8 @@
   "msg.file-exists.overwrite-it": "Möchten Sie sie überschreiben?",
   "msg.file-exists.title": "Datei existiert bereits",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "Die Protokolldatei hat eine unbekannte Größe und ist daher nur zum Herunterladen verfügbar",
+  "ntf.calibration-error": "Kalibrierungsfehler",
+  "ntf.low-resin.message": "Die gemessene Harzmenge ist zu gering. Der Druck kann fortgesetzt werden, es kann jedoch ein Nachfüllen erforderlich sein.",
+  "ntf.low-resin.title": "Harz niedrig"
 }

src/locales/source/en.json

@@ -105,7 +105,10 @@
   "ntf.camera-config-success": "Camera configuration has been updated",
   "ntf.e-307": "Resin measuring failed!",
   "ntf.error": "Error",
+  "ntf.calibration-error": "Calibration Error",
   "ntf.n-calibrated": "Printer is not calibrated!",
+  "ntf.low-resin.title": "Resin low",
+  "ntf.low-resin.message": "Measured resin volume is too low. The print can continue, however, a refill might be required.",
   "ntf.not-idle": "Printer is not idle!",
   "ntf.settings-suc": "Settings was changed successfully.",
   "ntf.start-print": "The printer is getting ready.",

src/locales/source/es.json

@@ -41,7 +41,7 @@
   "ntf.actn-pending": "La acción se realizará al terminar la capa.",
   "ntf.e-307": "Falló la medición de resina.",
   "ntf.error": "Error",
-  "ntf.n-calibrated": "¡La impresora no está calibrada!",
+  "ntf.n-calibrated": "¡Impresora no calibrada!",
   "ntf.not-idle": "¡La impresora no está inactiva!",
   "ntf.start-print": "La impresora se está preparando.",
   "ntf.success": "Éxito",
@@ -249,7 +249,7 @@
   "btn.connect.unlink": "Desenlazar",
   "conn.connect.not-linked": "No enlazado",
   "msg.drop-zone.label": "Arrastra archivo aquí para subirlo",
-  "btn.check-updates": "Comprobar actualizaciones",
+  "btn.check-updates": "Comprobar Actualizaciones",
   "btn.upgrade": "Actualización",
   "upgrade.success.message": "La página se recargará en 5 segundos",
   "upgrade.success.title": "Actualización con Éxito",
@@ -267,5 +267,8 @@
   "msg.file-exists.overwrite-it": "¿Quieres sobrescribirlo?",
   "msg.file-exists.title": "El archivo ya existe",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "El archivo de registro es de tamaño desconocido y, por lo tanto, solo está disponible para su descarga.",
+  "ntf.calibration-error": "Error de calibración",
+  "ntf.low-resin.message": "El volumen de resina medido es demasiado bajo. La impresión puede continuar, sin embargo, es posible que se requiera una recarga.",
+  "ntf.low-resin.title": "Poca resina"
 }

src/locales/source/fr.json

@@ -80,7 +80,7 @@
   "ntf.actn-pending": "L'action sera exécutée une fois la couche terminée.",
   "ntf.e-307": "La mesure de la résine a échoué",
   "ntf.error": "Erreur",
-  "ntf.n-calibrated": "L'imprimante n'est pas calibrée !",
+  "ntf.n-calibrated": "L'imprimante n'est pas calibrée !",
   "ntf.not-idle": "L'imprimante n'est pas au repos !",
   "ntf.settings-suc": "Paramètres modifiés avec succès.",
   "ntf.start-print": "Préparation de l'imprimante.",
@@ -278,5 +278,8 @@
   "msg.file-exists.title": "Le fichier existe déjà",
   "conn.error_status": "Erreur",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "Le fichier de journal est d'une taille inconnue et n'est donc disponible que pour le téléchargement",
+  "ntf.calibration-error": "Erreur de Calibration",
+  "ntf.low-resin.message": "Le volume de résine mesuré est trop bas. L'impression peut continuer, mais un remplissage pourra être nécessaire.",
+  "ntf.low-resin.title": "Niveau de résine bas"
 }

src/locales/source/it.json

@@ -41,7 +41,7 @@
   "ntf.actn-pending": "L'azione verrà eseguita dopo il completamento del layer.",
   "ntf.e-307": "Misurazione resina non riuscita!",
   "ntf.error": "Errore",
-  "ntf.n-calibrated": "La stampante adesso è calibrata!",
+  "ntf.n-calibrated": "La stampante non è calibrata!",
   "ntf.not-idle": "La stampante non è inattiva!",
   "ntf.start-print": "Preparazione della stampante.",
   "ntf.success": "Successo",
@@ -267,5 +267,8 @@
   "msg.file-exists.overwrite-it": "Vuoi sovrascriverlo?",
   "msg.file-exists.title": "File già esistente",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "Il file di log è di dimensioni sconosciute e quindi è disponibile solo per il download.",
+  "ntf.calibration-error": "Errore di calibrazione",
+  "ntf.low-resin.message": "Il volume di resina misurato è troppo basso. La stampa può continuare, ma potrebbe essere necessaria una ricarica.",
+  "ntf.low-resin.title": "Resina bassa"
 }

src/locales/source/kr.json

@@ -276,5 +276,8 @@
   "msg.file-exists.overwrite-it": "덮어쓰시겠습니까?",
   "msg.file-exists.title": "파일이 이미 존재합니다.",
   "conn.printer.not-supported": "지원하지 않는 프린터입니다.",
-  "logs.file-size-unknown": "로그파일의 크기를 알 수 없으므로 다운로드만 가능합니다."
-}
+  "logs.file-size-unknown": "로그파일의 크기를 알 수 없으므로 다운로드만 가능합니다.",
+  "ntf.calibration-error": "",
+  "ntf.low-resin.message": "",
+  "ntf.low-resin.title": ""
+}

src/locales/source/lt.json

@@ -275,5 +275,8 @@
   "msg.file-exists.overwrite-it": "",
   "msg.file-exists.title": "",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "",
+  "ntf.calibration-error": "",
+  "ntf.low-resin.message": "",
+  "ntf.low-resin.title": ""
 }

src/locales/source/nl.json

@@ -275,5 +275,8 @@
   "msg.file-exists.overwrite-it": "",
   "msg.file-exists.title": "",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "",
+  "ntf.calibration-error": "",
+  "ntf.low-resin.message": "",
+  "ntf.low-resin.title": ""
 }

src/locales/source/pl.json

@@ -267,5 +267,8 @@
   "msg.file-exists.overwrite-it": "Czy chcesz go nadpisać?",
   "msg.file-exists.title": "Plik już istnieje",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "Plik logu ma nieznany rozmiar i dlatego jest dostępny tylko do pobrania",
+  "ntf.calibration-error": "Błąd kalibracji",
+  "ntf.low-resin.message": "Zmierzona ilość żywicy jest zbyt niska. Drukowanie można kontynuować, jednak konieczne może być uzupełnienie w trakcie.",
+  "ntf.low-resin.title": "Niski poziom żywicy"
 }

src/locales/source/sk.json

@@ -278,5 +278,8 @@
   "msg.file-exists.overwrite-it": "",
   "msg.file-exists.title": "",
   "conn.printer.not-supported": "",
-  "logs.file-size-unknown": ""
+  "logs.file-size-unknown": "",
+  "ntf.calibration-error": "",
+  "ntf.low-resin.message": "",
+  "ntf.low-resin.title": ""
 }

src/printer/common.js

@@ -2,9 +2,10 @@ import { LinkState, translateState } from "../state";
 
 const SEPARATOR = " - ";
 
-export const getPrinterLabel = (context) => {
-  return buildTitle([context.printer?.location, context.printer?.name]);
-};
+export const getPrinterLabel = (context) => buildTitle([
+  context.printer?.location || context.printer?.hostname,
+  context.printer?.name
+]);
 
 export const buildTitle = (titleItems) => {
   return [...titleItems]

src/printer/components/cameras.js

@@ -411,7 +411,6 @@ const createCameraSettingsModal = (cameraId, resolve) => {
         inputTriggerScheme.value = translateTriggerScheme(data.trigger_scheme);
 
         setVisible(inputFocus.parentNode, hasFocus);
-        console.log(`DEBUG: has focus (${hasFocus})`, data)
         if (hasFocus) {
           inputFocus.value = Math.round(data.focus * 100);
         }

src/printer/components/control.js

@@ -8,7 +8,6 @@ import updateProperties from "./updateProperties";
 import { disableSteppers, extrude, homePrinthead, movePrinthead, retract, setBedTemperature, setFlowRate, setNozzleTemperature, setSpeed } from "./controlActions";
 import { handleError } from "./errors";
 import { LinkState } from "../../state";
-import { context } from "../fdm";
 
 let moveStep = 1;
 let extrudeRetractStep = 1;

src/printer/components/dataFormat.js

@@ -20,19 +20,6 @@ const str_GB = translate("unit.gb");
 const str_true = translate("prop.true");
 const str_false = translate("prop.false");
 
-/**
- * Format the value data with format specificated.
- * @param {string} format - one of ["int", "number", "layer", "temp", "fan", "resin", "cover", "date", "progress", "timeEst", "time", "expo", "boolean"]
- * @param {any} value
- */
-const formatData = (format, value) => {
-  if (process.env.PRINTER_TYPE === "sla") {
-    return slaFormatData(format, value);
-  } else {
-    return fdmFormatData(format, value);
-  }
-};
-
 /**
  * It formats a number using fixed-point notation with one digit after the decimal point.
  * ex: 123.456 => 123.4
@@ -193,75 +180,38 @@ function formatBoolean(value) {
 }
 
 /**
- * Format the value data with format specificated for sla type.
- * @param {string} format - one of ["int", "number", "layer", "temp", "fan", "resin", "cover", "date", "progress", "timeEst", "time", "expo", "boolean"]
+ * Format the value data with format specificated.
+ * @param {string} format - one of ["number", "temp", "fan", "pos", "date", "progress", "timeEst", "time"]
  * @param {any} value
  */
-const slaFormatData = (format, value) => {
+const formatData = (format, value) => {
   if (value === undefined || (value === null && format !== "progress")) {
     return translate("prop.na");
   }
+
   switch (format) {
     case "int":
       return parseInt(value);
     case "number":
       return numberFormat(value);
     case "layer":
       return numberFormat(value, false) + " mm";
-    case "temp":
-      return numberFormat(value) + " °C";
-    case "fan":
-      return numberFormat(value) + ` ${str_rpm}`;
-    case "resin":
-      return numberFormat(value) + ` ${str_ml}`;
-    case "cover":
-      return value
-        ? translate("prop.cover-closed")
-        : translate("prop.cover-opened");
-    case "date":
-      return dateFormat(value);
-    case "progress":
-      return numberFormat((value || 0) * 100, true, 0) + "%";
-    case "timeEst":
-      return formatEstimatedTime(value);
-    case "time":
-      return formatTime(value);
-    case "est-time":
-      return "~ " + formatTime(value);
-    case "expo":
-      return formatExposure(value);
     case "totalLayer":
       return totalLayers(value);
     case "material":
       return value || translate("prop.na");
-    case "size":
-      return formatSize(value);
-    case "boolean":
-      return formatBoolean(value);
-    default:
-      return value;
-  }
-};
-
-/**
- * Format the value data with format specificated for fdm type.
- * @param {string} format - one of ["number", "temp", "fan", "pos", "date", "progress", "timeEst", "time"]
- * @param {any} value
- */
-const fdmFormatData = (format, value) => {
-  if (value === undefined || (value === null && format !== "progress")) {
-    return translate("prop.na");
-  }
-
-  switch (format) {
-    case "number":
-      return numberFormat(value);
     case "temp":
       return numberFormat(value) + " °C";
     case "temp_int":
         return numberFormat(value, 0) + "°C";
     case "fan":
       return numberFormat(value) + ` ${str_rpm}`;
+    case "resin":
+      return numberFormat(value) + ` ${str_ml}`;
+    case "cover":
+      return value
+        ? translate("prop.cover-closed")
+        : translate("prop.cover-opened");
     case "print":
       return numberFormat(value || 0, true, 0) + "%";
     case "pos":

src/printer/components/errors.js

@@ -22,12 +22,12 @@ export function handleError(result, options) {
   let message = result?.data?.message
     || options?.fallbackMessage?.message
     || "Action can not be performed";
-  let isWarning = false;
+  let isWarning = options?.isWarning ?? false;
 
   if (result?.data) {
     const data = result.data;
     if (data.code) {
-      title += `- ${data.code}`;
+      title += ` - ${data.code}`;
       if (`${data.code}`[3] == "7")
         isWarning = true;
     }

src/printer/components/files.js

@@ -69,7 +69,7 @@ function getCurrentApiPath(fileName) {
   return getApiPath(storage.path, path, fileName);
 }
 
-function getApiPath(origin, path, file) {
+export function getApiPath(origin, path, file) {
   const apiPath = ["/api/v1/files", origin, path, file].filter((e) => !!e)
     .join("/");
 
@@ -202,6 +202,9 @@ const updateFiles = (opts = {}) => {
     headers: { "If-None-Match": lastETag },
   })
   .then((result) => {
+    if (result.code === 304) {
+      return
+    }
     if (url !== getCurrentApiPath()) {
       // user navigated to other folder
       return;