Skip to content

Latest commit

 

History

History
213 lines (124 loc) · 5.61 KB

Readme.md

File metadata and controls

213 lines (124 loc) · 5.61 KB

subg_rfspy

Build Status

Pre-Requisites for Building subg_rfspy

[sdcc] (http://sdcc.sourceforge.net/) version >= 3.7.0 is required for this build. There is a docker image available for this purpose.

It's also possible to build it under Windows. The best way to do this is to:

  1. install SDCC version 3.7.0
  2. install Cygwin
  3. use Cygwin to install make
  4. Use cygwin bash to build the project

To install, you'll need cc-tool

Building and Installing

make -f Makefile.spi1_alt2 install

Building and Installing using docker

docker run -v `pwd`:/subg_rfspy  ps2docker/sdcc_docker /bin/sh -c "cd /subg_rfspy; make -f Makefile.spi1_alt2
cc-tool -n CC1110 --log install.log -ew output/spi1_alt2_RILEYLINK_US_STDLOC/spi1_alt2_RILEYLINK_US_STDLOC.hex

Radio Frequency Selection

This code defaults to building firmware that is tuned to 916.5 Mhz. You can also build a 'WorldWide' firmware. This changes the default frequency to 868 and tweaks a few other settings.

make -f Makefile.spi1_alt2 RADIO_LOCALE=WW

Protocol

See protocol.md

Addendum

Serial/Uart Support

Serial support is no longer supported. See serial.md for historical information.

Supported Registers

SYNC1 (0x00)

Sync Word, High Byte. 8 MSB of 16-bit sync word.

SYNC0 (0x01)

Sync Word, Low Byte. 8 LSB of 16-bit sync word.

PKTLEN (0x02)

Packet Length. Indicates the packet length when fixed length packets are enabled. If variable length packets are used, this value indicates the maximum length packets allowed.

PKTCTRL1 (0x03)

Packet Automation Control. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

PKTCTRL0 (0x04)

Packet Automation Control. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

ADDR (0x05)

Device Address. Address used for packet filtration. Optional broadcast addresses are 0 (0x00) and 255 (0xFF).

CHANNR (0x06)

Channel Number. The 8-bit unsigned channel number, which is multiplied by the channel spacing setting and added to the base frequency.

FSCTRL1 (0x07)

Frequency Synthesizer Control.

FSCTRL0 (0x08)

Frequency Synthesizer Control. Frequency offset added to the base frequency before being used by the FS.

FREQ2 (0x09)

Frequency Control Word, High Byte.

FREQ1 (0x0A)

Frequency Control Word, Middle Byte.

FREQ0 (0x0B)

Frequency Control Word, Low Byte.

MDMCFG4 (0x0C)

Modem Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MDMCFG3 (0x0D)

Modem Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MDMCFG2 (0x0E)

Modem Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MDMCFG1 (0x0F)

Modem Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MDMCFG0 (0x10)

Modem Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

DEVIATN (0x11)

Modem Deviation Setting. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MCSM2 (0x12)

Main Radio Control State Machine Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MCSM1 (0x13)

Main Radio Control State Machine Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

MCSM0 (0x14)

Main Radio Control State Machine Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FOCCFG (0x15)

Frequency Offset Compensation Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

BSCFG (0x16)

Bit Synchronization Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

AGCCTRL2 (0x17)

AGC Control. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

AGCCTRL1 (0x18)

AGC Control. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

AGCCTRL0 (0x19)

AGC Control. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FREND1 (0x1A)

Front End RX Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FREND0 (0x1B)

Front End RX Configuration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FSCAL3 (0x1C)

Frequency Synthesizer Calibration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FSCAL2 (0x1D)

Frequency Synthesizer Calibration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FSCAL1 (0x1E)

Frequency Synthesizer Calibration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

FSCAL0 (0x1F)

Frequency Synthesizer Calibration. Different bit ranges have different functions. See CC1110/CC1111 datasheet for more information.

PA_TABLE1 (0x2D)

Power amplifier output power setting 1.

PA_TABLE0 (0x2E)

Power amplifier output power setting 0.