when starting drone,I get an error:Error setting direction(0) nflog: Setting direError setting direction(0) nflog: Setting direction is not implemented on this platformction is not implemented on this platform

[GoogleCodeExporter]

My OS is gentoo,I installed OStinato without modification.
I can't start drone with ostinato automatically,when I start it manually,I got 
an error:
#drone
[root@Gentoo /]# LC_ALL="en_US.UTF-8" drone
Retrieving the device list from the local machine

0. eth0
cap file = /tmp/qt_temp.J10091
adding dev to all ports list <eth0>
1. wlan0
cap file = /tmp/qt_temp.T10091
adding dev to all ports list <wlan0>
2. nflog
 (Linux netfilter log (NFLOG) interface)

Error setting direction(0) nflog: Setting direction is not implemented on this 
platform

PortMonitor: Error opening port nflog: nflog: Can't listen on group group 
index: Operation not permitted

PortTransmitter: Error opening port nflog: nflog: Can't listen on group group 
index: Operation not permitted

cap file = /tmp/qt_temp.M10091

the outputs of dmesg:

[root@Gentoo /]# dmesg 
[31006.038110] device eth0 entered promiscuous mode
[31006.314643] device eth0 left promiscuous mode
[31006.360050] device wlan0 entered promiscuous mode
[31006.455416] device wlan0 left promiscuous mode
[31006.481137] drone[10216]: segfault at 110 ip 00007f1cf9e93014 sp 
00007fff381fc820 error 4 in libpcap.so.1.2.1[7f1cf9e82000+3b000]

Original issue reported on code.google.com by emn...@gmail.com on 9 Mar 2012 at 12:16

• Merged into: Segment fault when open port failed #64

[GoogleCodeExporter]

Already fixed. Please build from source.

Original comment by pstav...@gmail.com on 9 Mar 2012 at 2:00

• Changed state: Duplicate

[GoogleCodeExporter]

I am attempting to run this on Ubuntu 14.04 - had previously tried Live CD as 
well -- and am getting the following with all of my interfaces showing a 
0.0.0.0 ip address:

Error setting direction(0) nflog: Setting direction is not implemented on this 
platform. Running version 0.5.1

Original comment by juan.con...@gmail.com on 17 May 2014 at 2:38

[GoogleCodeExporter]

Juan,

What happens after the error? Does drone crash? does it stop? Or does it 
continue working and you can use other ports?

Please also provide the full console output of drone from the start to 
investigate this.

Since this issue is closed please provide answers to the above and the log file 
on the mailing list where we can investigate/discuss and if required, file a 
new bug.

Original comment by pstav...@gmail.com on 18 May 2014 at 5:31