esp32-nodemcu-test.yaml

substitutions:
  device_name: esp32-nodemcu-test
  device_comment: "ESP-WROOM-32 NodeMCU Test Device"

esphome:
  name: ${device_name}
  comment: ${device_comment}
  platform: ESP32
  board: nodemcu-32s

packages:
  common: !include templates/common.yaml

dallas:
  - pin: GPIO25
    update_interval: 5s

sensor:
  - platform: dallas
    address: 0xB50114551B78AA28
    name: "Office Temperature"
    id: office_temp
  - platform: pulse_counter
    pin: GPIO18
    unit_of_measurement: 'gal/min'
    name: 'Water Pulse Counter'
    filters:
      - multiply: 10

switch:
  - platform: gpio
    name: "Blue LED on GPIO2"
    pin: GPIO2
  - platform: gpio
    name: "Red LED on GPIO19"
    id: red_led
    pin: GPIO19

# https://tinkerman.cat/post/sonoff-th10-th16-sensors-displays-actuators
# https://www.forward.com.au/pfod/ESP8266/GPIOpins/ESP8266_01_pin_magic.html
# https://github.com/frenck/home-assistant-config/blob/master/config/esphome/esp05.yaml
# https://github.com/jonathanadams/esphome-configs
# https://esphome-configs.io/
# https://community.home-assistant.io/t/programming-teckin-sp20-esphome-without-using-tuya-convert/155576/8
# https://community.home-assistant.io/t/teckin-sp32-on-esphome/104363/15
# https://blog.quindorian.org/2019/02/home-assistant-10-wifi-energy-meter-with-esphome.html/
# https://frenck.dev/calibrating-an-esphome-flashed-power-plug/
# https://www.digiblur.com/2020/01/tuya-convert-23-update-flash-tuya.html
# https://esphome-configs.io/guides/tuya-convert/
# https://github.com/ct-Open-Source/tuya-convert/wiki/Compatible-devices-(HTTPS-firmware)
# https://www.digiblur.com/2020/07/how-to-use-sonoff-zigbee-bridge-with.html