-
Notifications
You must be signed in to change notification settings - Fork 22
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
I created a two way pwm and I want to set it to cw #194
Comments
@24021438 Please load the "gledopto" configuration file from the "Presets" folder. |
First of all, thank you for your answer. The first time I used this firmware, I have already mastered the switch firmware, but I can't figure out how to generate a lamp with only cw dual channel pwm. Could you take a screenshot to demonstrate how to configure the firmware? |
I only need color temperature lamps with only CCT |
ATTENTION! This version contains changes that are incompatible with a previous version. You cannot fully use a configuration from the previous version in the new version. [All chips] Now, the firmware uses standard Zigbee clusters for temperature, pressure, humidity, and illuminance sensors. It improves compatibility with high-level systems like HA (probably, you'll need to (re)create a custom converter for your device in Z2M) (#166). [All chips] All temperature sensors are joined into two groups: 1-wire (e.g, DHT22) and 2-wire (I2C), where a sensor type defined as a parameter. Now, the firmware does not try to detect a sensor type and uses your setting. It allows using some Chinese clones of these sensors. [All chips] Now, all temperature sensors are polled without detecting their presence. [All chips][LED] Added the CCT mode for PWM (color temperature control for the white color) (#194). [CC2652P7] Added the new chip type. Advantages: more RAM and flash memory. All functions are compatible with CC2652P. [CC2651R] Added the new chip type. Advantages: lower power consumption and price. Disadvantages: lower RAM capacity. All functions are almost compatible with CC2652R, but the firmware for LED is limited to 200 LEDs. You can use this chip as an alternative to СС2530, but do not try to add many functions to a single module. [CC26XX] Added new sensors SHT40 (#60), HDC2080 (#101), HX711 (#186), X9C103 (#137). [All chips] Fixed a problem with saving multi-click settings to a HEX file (#199). [Configurator] Fixed a problem with saving a custom converter with configurable inputs (#204). Download: https://ptvo.info/download/ptvo-firmware-2023-05-24.zip
@24021438 Could you please test the new feature (two PWM channels for white color temperature)? |
I want to make a dual color temperature lamp, but I don't know how to set the color temperature channels L1L2, e.light_ brightness_ Colortemp (). withEndpoint ('l2 '), including brightness control. How do I fill in the channel control of two L1L2 channels? e.light_ brightness().withEndpoint('l2')
The text was updated successfully, but these errors were encountered: