Pushi born

wq

.gitignore

@@ -6,13 +6,13 @@ reset-files.bash
 *.tar.gz
 
 *.exe
-src/dash
-src/dashd
-src/dash-cli
-src/dash-tx
-src/test/test_dash
-src/qt/test/test_dash-qt
-src/bench/bench_dash
+src/pushi
+src/pushid
+src/pushi-cli
+src/pushi-tx
+src/test/test_pushi
+src/qt/test/test_pushi-qt
+src/bench/bench_pushi
 
 # autoreconf
 Makefile.in
@@ -35,8 +35,8 @@ config.log
 config.status
 configure
 libtool
-src/config/dash-config.h
-src/config/dash-config.h.in
+src/config/pushi-config.h
+src/config/pushi-config.h.in
 src/config/stamp-h1
 share/setup.nsi
 share/qt/Info.plist
@@ -62,7 +62,7 @@ libconftest.dylib*
 *.o
 *.o-*
 *.patch
-.dash
+.pushi
 *.a
 *.pb.cc
 *.pb.h
@@ -81,12 +81,12 @@ libconftest.dylib*
 # Compilation and Qt preprocessor part
 *.qm
 Makefile
-dash-qt
-Dash-Qt.app
+pushi-qt
+Pushi-Qt.app
 
 # Unit-tests
 Makefile.test
-dash-qt_test
+pushi-qt_test
 src/test/buildenv.py
 
 # Resources cpp
@@ -100,7 +100,7 @@ build
 *.gcno
 *.gcda
 /*.info
-test_dash.coverage/
+test_pushi.coverage/
 total.coverage/
 coverage_percent.txt
 
@@ -123,12 +123,12 @@ share/BitcoindComparisonTool.jar
 .autotools
 /doc/doxygen/
 
-libdashconsensus.pc
-src/qt/dash-qt.bash
+libpushiconsensus.pc
+src/qt/pushi-qt.bash
 qa/pull-tester/tests-config.sh
 
 #development symlinks
-dash-cli
-dashd
-dash-qt
+pushi-cli
+pushid
+pushi-qt
 make

.travis.yml

@@ -39,19 +39,19 @@ env:
     - HOST=arm-linux-gnueabihf PPA="ppa:bitcoin/bitcoin" PACKAGES="g++-arm-linux-gnueabihf" DEP_OPTS="NO_QT=1" CHECK_DOC=1 GOAL="install" BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
 # Win32
     - HOST=i686-w64-mingw32 DPKG_ADD_ARCH="i386" DEP_OPTS="NO_QT=1" PPA="ppa:bitcoin/bitcoin" PACKAGES="python3 nsis g++-mingw-w64-i686 wine1.7 bc" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-gui --enable-reduce-exports" MAKEJOBS="-j4" WINE=true
-# 32-bit + dash
-    - HOST=i686-pc-linux-gnu PPA="ppa:bitcoin/bitcoin" PACKAGES="g++-multilib bc python3-zmq" DEP_OPTS="NO_QT=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++" USE_SHELL="/bin/dash" PYZMQ=true
+# 32-bit + pushi
+    - HOST=i686-pc-linux-gnu PPA="ppa:bitcoin/bitcoin" PACKAGES="g++-multilib bc python3-zmq" DEP_OPTS="NO_QT=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++" USE_SHELL="/bin/pushi" PYZMQ=true
 # Win64
     - HOST=x86_64-w64-mingw32 DPKG_ADD_ARCH="i386" DEP_OPTS="NO_QT=1" PPA="ppa:bitcoin/bitcoin" PACKAGES="python3 nsis g++-mingw-w64-x86-64 wine1.7 bc" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-gui --enable-reduce-exports" MAKEJOBS="-j4" WINE=true
-# dashd
-    - HOST=x86_64-unknown-linux-gnu PPA="ppa:bitcoin/bitcoin" PACKAGES="bc python3-zmq" DEP_OPTS="NO_QT=1 NO_UPNP=1 DEBUG=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports" CPPFLAGS="-DDEBUG_LOCKORDER -DENABLE_DASH_DEBUG" PYZMQ=true
+# pushid
+    - HOST=x86_64-unknown-linux-gnu PPA="ppa:bitcoin/bitcoin" PACKAGES="bc python3-zmq" DEP_OPTS="NO_QT=1 NO_UPNP=1 DEBUG=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports" CPPFLAGS="-DDEBUG_LOCKORDER -DENABLE_PUSHI_DEBUG" PYZMQ=true
 # No wallet
     - HOST=x86_64-unknown-linux-gnu PPA="ppa:bitcoin/bitcoin" PACKAGES="python3" DEP_OPTS="NO_WALLET=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
 # Cross-Mac
     - HOST=x86_64-apple-darwin11 PPA="ppa:bitcoin/bitcoin" PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev" BITCOIN_CONFIG="--enable-gui --enable-reduce-exports" OSX_SDK=10.9 GOAL="deploy"
 
 before_install:
-    - git clone https://github.com/dashpay/dash_hash
+    - git clone https://github.com/pushiplay/pushi_hash
     - travis_retry sudo apt-get install python-dev
     - travis_retry sudo add-apt-repository ppa:ubuntu-wine/ppa -y
     - export PATH=$(echo $PATH | tr ':' "\n" | sed '/\/opt\/python/d' | tr "\n" ":" | sed "s|::|:|g")
@@ -61,7 +61,7 @@ install:
     - if [ -n "$DPKG_ADD_ARCH" ]; then sudo dpkg --add-architecture "$DPKG_ADD_ARCH" ; fi
     - if [ -n "$PACKAGES" ]; then travis_retry sudo apt-get update; fi
     - if [ -n "$PACKAGES" ]; then travis_retry sudo apt-get install --no-install-recommends --no-upgrade -qq $PACKAGES; fi
-    - cd dash_hash && python setup.py install --user && cd ..
+    - cd pushi_hash && python setup.py install --user && cd ..
 before_script:
     - unset CC; unset CXX
     - unset DISPLAY
@@ -76,13 +76,13 @@ script:
     - depends/$HOST/native/bin/ccache --max-size=$CCACHE_SIZE
     - test -n "$USE_SHELL" && eval '"$USE_SHELL" -c "./autogen.sh"' || ./autogen.sh
     - ./configure --cache-file=config.cache $BITCOIN_CONFIG_ALL $BITCOIN_CONFIG || ( cat config.log && false)
-    - make distdir PACKAGE=dash VERSION=$HOST
-    - cd dash-$HOST
+    - make distdir PACKAGE=pushi VERSION=$HOST
+    - cd pushi-$HOST
     - ./configure --cache-file=../config.cache $BITCOIN_CONFIG_ALL $BITCOIN_CONFIG || ( cat config.log && false)
     - make $MAKEJOBS $GOAL || ( echo "Build failure. Verbose build follows." && make $GOAL V=1 ; false )
     - export LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib
     - if [ "$RUN_TESTS" = "true" -a "$WINE" != "true" ]; then travis_wait 30 make $MAKEJOBS check VERBOSE=1; fi
-    - if [ "$RUN_TESTS" = "true" -a "$WINE" = "true" ]; then wine  src/test/test_dash.exe --log_level=test_suite; fi
+    - if [ "$RUN_TESTS" = "true" -a "$WINE" = "true" ]; then wine  src/test/test_pushi.exe --log_level=test_suite; fi
     - if [ "$RUN_TESTS" = "true" ]; then qa/pull-tester/rpc-tests.py --coverage; fi
 after_script:
     - if [ "$TRAVIS_PULL_REQUEST" != "false" ]; then (echo "Upload goes here. Something like: scp -r $BASE_OUTDIR server" || echo "upload failed"); fi

.tx/config

@@ -1,7 +1,7 @@
 [main]
 host = https://www.transifex.com
 
-[dash.qt-translation-012x]
-file_filter = src/qt/locale/dash_<lang>.ts
-source_file = src/qt/locale/dash_en.ts
+[pushi.qt-translation-012x]
+file_filter = src/qt/locale/pushi_<lang>.ts
+source_file = src/qt/locale/pushi_en.ts
 source_lang = en

CONTRIBUTING.md

@@ -1,7 +1,7 @@
-Contributing to Dash Core
+Contributing to Pushi Core
 ============================
 
-The Dash Core project operates an open contributor model where anyone is welcome to contribute towards development in the form of peer review, testing and patches. This document explains the practical process and guidelines for contributing.
+The Pushi Core project operates an open contributor model where anyone is welcome to contribute towards development in the form of peer review, testing and patches. This document explains the practical process and guidelines for contributing.
 
 Firstly in terms of structure, there is no particular concept of “Core developers” in the sense of privileged people. Open source often naturally revolves around meritocracy where longer term contributors gain more trust from the developer community. However, some hierarchy is necessary for practical purposes. As such there are repository “maintainers” who are responsible for merging pull requests as well as a “lead maintainer” who is responsible for the release cycle, overall merging, moderation and appointment of maintainers.
 
@@ -67,9 +67,9 @@ Project maintainers aim for a quick turnaround on refactoring pull requests, so
 "Decision Making" Process
 -------------------------
 
-The following applies to code changes to the Dash Core project (and related projects such as libsecp256k1), and is not to be confused with overall Dash Network Protocol consensus changes.
+The following applies to code changes to the Pushi Core project (and related projects such as libsecp256k1), and is not to be confused with overall Pushi Network Protocol consensus changes.
 
-Whether a pull request is merged into Dash Core rests with the project merge maintainers and ultimately the project lead.
+Whether a pull request is merged into Pushi Core rests with the project merge maintainers and ultimately the project lead.
 
 Maintainers will take into consideration if a patch is in line with the general principles of the project; meets the minimum standards for inclusion; and will judge the general consensus of contributors.
 
@@ -82,7 +82,7 @@ In general, all pull requests must:
   - not break the existing test suite;
   - where bugs are fixed, where possible, there should be unit tests demonstrating the bug and also proving the fix. This helps prevent regression.
 
-Patches that change Dash consensus rules are considerably more involved than normal because they affect the entire ecosystem and so must be preceded by extensive mailing list discussions and have a numbered BIP. While each case will be different, one should be prepared to expend more time and effort than for other kinds of patches because of increased peer review and consensus building requirements.
+Patches that change Pushi consensus rules are considerably more involved than normal because they affect the entire ecosystem and so must be preceded by extensive mailing list discussions and have a numbered BIP. While each case will be different, one should be prepared to expend more time and effort than for other kinds of patches because of increased peer review and consensus building requirements.
 
 
 ### Peer Review
@@ -101,10 +101,10 @@ Project maintainers reserve the right to weigh the opinions of peer reviewers us
 
 Where a patch set affects consensus critical code, the bar will be set much higher in terms of discussion and peer review requirements, keeping in mind that mistakes could be very costly to the wider community. This includes refactoring of consensus critical code.
 
-Where a patch set proposes to change the Dash consensus, it must have been discussed extensively on the mailing list and IRC, be accompanied by a widely discussed BIP and have a generally widely perceived technical consensus of being a worthwhile change based on the judgement of the maintainers.
+Where a patch set proposes to change the Pushi consensus, it must have been discussed extensively on the mailing list and IRC, be accompanied by a widely discussed BIP and have a generally widely perceived technical consensus of being a worthwhile change based on the judgement of the maintainers.
 
 
 Release Policy
 --------------
 
-The project leader is the release manager for each Dash Core release.
+The project leader is the release manager for each Pushi Core release.

COPYING

@@ -2,6 +2,7 @@ The MIT License (MIT)
 
 Copyright (c) 2009-2016 The Bitcoin Core developers
 Copyright (c) 2014-2017 The Dash Core developers
+Copyright (c) 2017-2018 The Pushi Core developers
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

INSTALL

@@ -1,7 +1,7 @@
-Building Dash Core
+Building Pushi Core
 
 After you install the usual build tools and C++ development tools,
-Dash Core also needs some build dependencies which are not always provided
+Pushi Core also needs some build dependencies which are not always provided
 by default by the OS package manager
 (in particular BerkeleyDB 4.8 for building with wallet support).
 
@@ -21,10 +21,10 @@ use the autogen script to prepare the build environment.
     make
 
 Precompiled binaries are available at github, see
-https://github.com/dashpay/dash-binaries
+https://github.com/pushiplay/pushi-binaries
 
 Always verify the signatures and checksums.
 
-See doc/build-*.md for instructions on building dashd,
+See doc/build-*.md for instructions on building pushid,
 the intended-for-services, no-graphical-interface,
-reference implementation of Dash.
+reference implementation of Pushi.

Makefile.am

@@ -6,16 +6,16 @@ GZIP_ENV="-9n"
 
 if BUILD_BITCOIN_LIBS
 pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libdashconsensus.pc
+pkgconfig_DATA = libpushiconsensus.pc
 endif
 
-BITCOIND_BIN=$(top_builddir)/src/dashd$(EXEEXT)
-BITCOIN_QT_BIN=$(top_builddir)/src/qt/dash-qt$(EXEEXT)
-BITCOIN_CLI_BIN=$(top_builddir)/src/dash-cli$(EXEEXT)
+BITCOIND_BIN=$(top_builddir)/src/pushid$(EXEEXT)
+BITCOIN_QT_BIN=$(top_builddir)/src/qt/pushi-qt$(EXEEXT)
+BITCOIN_CLI_BIN=$(top_builddir)/src/pushi-cli$(EXEEXT)
 BITCOIN_WIN_INSTALLER=$(PACKAGE)-$(PACKAGE_VERSION)-win$(WINDOWS_BITS)-setup$(EXEEXT)
 
-OSX_APP=Dash-Qt.app
-OSX_DMG=Dash-Core.dmg
+OSX_APP=Pushi-Qt.app
+OSX_DMG=Pushi-Core.dmg
 OSX_BACKGROUND_IMAGE=background.tiff
 OSX_DEPLOY_SCRIPT=$(top_srcdir)/contrib/macdeploy/macdeployqtplus
 OSX_FANCY_PLIST=$(top_srcdir)/contrib/macdeploy/fancy.plist
@@ -41,9 +41,9 @@ OSX_PACKAGING = $(OSX_DEPLOY_SCRIPT) $(OSX_FANCY_PLIST) $(OSX_INSTALLER_ICONS) $
   $(top_srcdir)/contrib/macdeploy/detached-sig-create.sh
 
 COVERAGE_INFO = baseline_filtered_combined.info baseline.info block_test.info \
-  leveldb_baseline.info test_dash_filtered.info total_coverage.info \
+  leveldb_baseline.info test_pushi_filtered.info total_coverage.info \
   baseline_filtered.info block_test_filtered.info rpc_test.info rpc_test_filtered.info \
-  leveldb_baseline_filtered.info test_dash_coverage.info test_dash.info
+  leveldb_baseline_filtered.info test_pushi_coverage.info test_pushi.info
 
 dist-hook:
 	-$(MAKE) -C $(top_distdir)/src/leveldb clean
@@ -86,7 +86,7 @@ $(OSX_APP)/Contents/Resources/bitcoin.icns: $(OSX_INSTALLER_ICONS)
 	$(MKDIR_P) $(@D)
 	$(INSTALL_DATA) $< $@
 
-$(OSX_APP)/Contents/MacOS/Dash-Qt: $(BITCOIN_QT_BIN)
+$(OSX_APP)/Contents/MacOS/Pushi-Qt: $(BITCOIN_QT_BIN)
 	$(MKDIR_P) $(@D)
 	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM)  $< $@
 
@@ -96,7 +96,7 @@ $(OSX_APP)/Contents/Resources/Base.lproj/InfoPlist.strings: $(OSX_BASE_LPROJ_DIR
 
 OSX_APP_BUILT=$(OSX_APP)/Contents/PkgInfo $(OSX_APP)/Contents/Resources/empty.lproj \
   $(OSX_APP)/Contents/Resources/bitcoin.icns $(OSX_APP)/Contents/Info.plist \
-  $(OSX_APP)/Contents/MacOS/Dash-Qt $(OSX_APP)/Contents/Resources/Base.lproj/InfoPlist.strings
+  $(OSX_APP)/Contents/MacOS/Pushi-Qt $(OSX_APP)/Contents/Resources/Base.lproj/InfoPlist.strings
 
 if BUILD_DARWIN
 $(OSX_DMG): $(OSX_APP_BUILT) $(OSX_PACKAGING)
@@ -111,18 +111,18 @@ $(APP_DIST_DIR)/Applications:
 	@rm -f $@
 	@cd $(@D); $(LN_S) /Applications $(@F)
 
-$(APP_DIST_EXTRAS): $(APP_DIST_DIR)/$(OSX_APP)/Contents/MacOS/Dash-Qt
+$(APP_DIST_EXTRAS): $(APP_DIST_DIR)/$(OSX_APP)/Contents/MacOS/Pushi-Qt
 
 $(OSX_DMG): $(APP_DIST_EXTRAS)
-	$(GENISOIMAGE) -no-cache-inodes -D -l -probe -V "Dash-Core" -no-pad -r -dir-mode 0755 -apple -o $@ dist
+	$(GENISOIMAGE) -no-cache-inodes -D -l -probe -V "Pushi-Core" -no-pad -r -dir-mode 0755 -apple -o $@ dist
 
 $(APP_DIST_DIR)/.background/$(OSX_BACKGROUND_IMAGE): contrib/macdeploy/$(OSX_BACKGROUND_IMAGE)
 	$(MKDIR_P) $(@D)
 	$(INSTALL) $< $@
 $(APP_DIST_DIR)/.DS_Store: contrib/macdeploy/DS_Store
 	$(INSTALL) $< $@
 
-$(APP_DIST_DIR)/$(OSX_APP)/Contents/MacOS/Dash-Qt: $(OSX_APP_BUILT) $(OSX_PACKAGING)
+$(APP_DIST_DIR)/$(OSX_APP)/Contents/MacOS/Pushi-Qt: $(OSX_APP_BUILT) $(OSX_PACKAGING)
 	INSTALLNAMETOOL=$(INSTALLNAMETOOL)  OTOOL=$(OTOOL) STRIP=$(STRIP) $(OSX_DEPLOY_SCRIPT) $(OSX_APP) -translations-dir=$(QT_TRANSLATION_DIR) -add-qt-tr $(OSX_QT_TRANSLATIONS) -verbose 2
 
 deploydir: $(APP_DIST_EXTRAS)
@@ -162,16 +162,16 @@ leveldb_baseline_filtered.info: leveldb_baseline.info
 baseline_filtered_combined.info: leveldb_baseline_filtered.info baseline_filtered.info
 	$(LCOV) -a leveldb_baseline_filtered.info -a baseline_filtered.info -o $@
 
-test_dash.info: baseline_filtered_combined.info
+test_pushi.info: baseline_filtered_combined.info
 	$(MAKE) -C src/ check
-	$(LCOV) -c -d $(abs_builddir)/src -t test_dash -o $@
+	$(LCOV) -c -d $(abs_builddir)/src -t test_pushi -o $@
 	$(LCOV) -z -d $(abs_builddir)/src
 	$(LCOV) -z -d $(abs_builddir)/src/leveldb
 
-test_dash_filtered.info: test_dash.info
+test_pushi_filtered.info: test_pushi.info
 	$(LCOV) -r $< "/usr/include/*" -o $@
 
-block_test.info: test_dash_filtered.info
+block_test.info: test_pushi_filtered.info
 	$(MKDIR_P) qa/tmp
 	-@TIMEOUT=15 qa/pull-tester/run-bitcoind-for-test.sh $(JAVA) -jar $(JAVA_COMPARISON_TOOL) qa/tmp/compTool $(COMPARISON_TOOL_REORG_TESTS)
 	$(LCOV) -c -d $(abs_builddir)/src --t BitcoinJBlockTest -o $@
@@ -181,7 +181,7 @@ block_test.info: test_dash_filtered.info
 block_test_filtered.info: block_test.info
 	$(LCOV) -r $< "/usr/include/*" -o $@
 
-rpc_test.info: test_dash_filtered.info
+rpc_test.info: test_pushi_filtered.info
 	-@TIMEOUT=15 python qa/pull-tester/rpc-tests.py $(EXTENDED_RPC_TESTS)
 	$(LCOV) -c -d $(abs_builddir)/src --t rpc-tests -o $@
 	$(LCOV) -z -d $(abs_builddir)/src
@@ -190,25 +190,25 @@ rpc_test.info: test_dash_filtered.info
 rpc_test_filtered.info: rpc_test.info
 	$(LCOV) -r $< "/usr/include/*" -o $@
 
-test_dash_coverage.info: baseline_filtered_combined.info test_dash_filtered.info
-	$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_dash_filtered.info -o $@
+test_pushi_coverage.info: baseline_filtered_combined.info test_pushi_filtered.info
+	$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_pushi_filtered.info -o $@
 
-total_coverage.info: baseline_filtered_combined.info test_dash_filtered.info block_test_filtered.info rpc_test_filtered.info
-	$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_dash_filtered.info -a block_test_filtered.info -a rpc_test_filtered.info -o $@ | $(GREP) "\%" | $(AWK) '{ print substr($$3,2,50) "/" $$5 }' > coverage_percent.txt
+total_coverage.info: baseline_filtered_combined.info test_pushi_filtered.info block_test_filtered.info rpc_test_filtered.info
+	$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_pushi_filtered.info -a block_test_filtered.info -a rpc_test_filtered.info -o $@ | $(GREP) "\%" | $(AWK) '{ print substr($$3,2,50) "/" $$5 }' > coverage_percent.txt
 
-test_dash.coverage/.dirstamp:  test_dash_coverage.info
+test_pushi.coverage/.dirstamp:  test_pushi_coverage.info
 	$(GENHTML) -s $< -o $(@D)
 	@touch $@
 
 total.coverage/.dirstamp: total_coverage.info
 	$(GENHTML) -s $< -o $(@D)
 	@touch $@
 
-cov: test_dash.coverage/.dirstamp total.coverage/.dirstamp
+cov: test_pushi.coverage/.dirstamp total.coverage/.dirstamp
 
 endif
 
-# Dash: disable the test until upstream switches from convoluted comparison tool
+# Pushi: disable the test until upstream switches from convoluted comparison tool
 # Ref https://github.com/bitcoin/bitcoin/issues/4545
 if USE_COMPARISON_TOOL
 check-local:
@@ -225,4 +225,4 @@ CLEANFILES = $(OSX_DMG) $(BITCOIN_WIN_INSTALLER)
 .INTERMEDIATE: $(COVERAGE_INFO)
 
 clean-local:
-	rm -rf coverage_percent.txt test_dash.coverage/ total.coverage/ qa/tmp/ cache/ $(OSX_APP)
+	rm -rf coverage_percent.txt test_pushi.coverage/ total.coverage/ qa/tmp/ cache/ $(OSX_APP)