Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-2…

…0210306' into staging

 * sbsa-ref: remove cortex-a53 from list of supported cpus
 * sbsa-ref: add 'max' to list of allowed cpus
 * target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
 * npcm7xx: add EMC model
 * xlnx-zynqmp: Remove obsolete 'has_rpu' property
 * target/arm: Speed up aarch64 TBL/TBX
 * virtio-mmio: improve virtio-mmio get_dev_path alog
 * target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
 * target/arm: Restrict v8M IDAU to TCG
 * target/arm/cpu: Update coding style to make checkpatch.pl happy
 * musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
 * Add new board: mps3-an524

# gpg: Signature made Sat 06 Mar 2021 13:49:46 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210306: (49 commits)
  hw/arm/mps2: Update old infocenter.arm.com URLs
  docs/system/arm/mps2.rst: Document the new mps3-an524 board
  hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
  hw/arm/mps2-tz: Stub out USB controller for mps3-an524
  hw/arm/mps2-tz: Add new mps3-an524 board
  hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
  hw/arm/mps2-tz: Support ROMs as well as RAMs
  hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
  hw/arm/mps2-tz: Make RAM arrangement board-specific
  hw/arm/mps2-tz: Allow boards to have different PPCInfo data
  hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
  hw/arm/mps2-tz: Move device IRQ info to data structures
  hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
  hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
  hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
  hw/arm/mps2-tz: Make number of IRQs board-specific
  hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
  hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
  hw/misc/mps2-fpgaio: Support SWITCH register
  hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system/arm/mps2.rst

@@ -1,12 +1,15 @@
-Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
-================================================================================================================
+Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``)
+=========================================================================================================================================
 
 These board models all use Arm M-profile CPUs.
 
-The Arm MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger
-FPGA but is otherwise the same as the 2). Since the CPU itself
-and most of the devices are in the FPGA, the details of the board
-as seen by the guest depend significantly on the FPGA image.
+The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a
+bigger FPGA but is otherwise the same as the 2; the 3 has a bigger
+FPGA again, can handle 4GB of RAM and has a USB controller and QSPI flash).
+
+Since the CPU itself and most of the devices are in the FPGA, the
+details of the board as seen by the guest depend significantly on the
+FPGA image.
 
 QEMU models the following FPGA images:
 
@@ -22,12 +25,21 @@ QEMU models the following FPGA images:
   Cortex-M3 'DesignStart' as documented in Arm Application Note AN511
 ``mps2-an521``
   Dual Cortex-M33 as documented in Arm Application Note AN521
+``mps3-an524``
+  Dual Cortex-M33 on an MPS3, as documented in Arm Application Note AN524
 
 Differences between QEMU and real hardware:
 
 - AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to
   block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as
   if zbt_boot_ctrl is always zero)
+- AN524 remapping of low memory to either BRAM or to QSPI flash is
+  unimplemented (QEMU always maps this to BRAM, ignoring the
+  SCC CFG_REG0 memory-remap bit)
 - QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest
   visible difference is that the LAN9118 doesn't support checksum
   offloading
+- QEMU does not model the QSPI flash in MPS3 boards as real QSPI
+  flash, but only as simple ROM, so attempting to rewrite the flash
+  from the guest will fail
+- QEMU does not model the USB controller in MPS3 boards

docs/system/arm/nuvoton.rst

@@ -44,6 +44,7 @@ Supported devices
  * Analog to Digital Converter (ADC)
  * Pulse Width Modulation (PWM)
  * SMBus controller (SMBF)
+ * Ethernet controller (EMC)
 
 Missing devices
 ---------------
@@ -57,7 +58,7 @@ Missing devices
    * Shared memory (SHM)
    * eSPI slave interface
 
- * Ethernet controllers (GMAC and EMC)
+ * Ethernet controller (GMAC)
  * USB device (USBD)
  * Peripheral SPI controller (PSPI)
  * SD/MMC host