hw/m68k: define Macintosh Quadra 800

If you want to test the machine, it doesn't yet boot a MacROM, but you can
boot a linux kernel from the command line.

You can install your own disk using debian-installer with:

    ./qemu-system-m68k \
    -M q800 \
    -serial none -serial mon:stdio \
    -m 1000M -drive file=m68k.qcow2,format=qcow2 \
    -net nic,model=dp83932,addr=09:00:07:12:34:57 \
    -append "console=ttyS0 vga=off" \
    -kernel vmlinux-4.15.0-2-m68k \
    -initrd initrd.gz \
    -drive file=debian-9.0-m68k-NETINST-1.iso \
    -drive file=m68k.qcow2,format=qcow2 \
    -nographic

If you use a graphic adapter instead of "-nographic", you can use "-g"
to set the size of the display (I use "-g 1600x800x24").

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-11-laurent@vivier.eu>

MAINTAINERS

@@ -920,10 +920,12 @@ F: include/hw/m68k/next-cube.h
 q800
 M: Laurent Vivier <laurent@vivier.eu>
 S: Maintained
+F: hw/m68k/q800.c
 F: hw/misc/mac_via.c
 F: hw/nubus/*
 F: hw/display/macfb.c
 F: hw/block/swim.c
+F: hw/m68k/bootinfo.h
 F: include/hw/misc/mac_via.h
 F: include/hw/nubus/*
 F: include/hw/display/macfb.h

hw/m68k/Kconfig

@@ -19,3 +19,6 @@ config Q800
     select NUBUS
     select MACFB
     select SWIM
+    select ESCC
+    select ESP
+    select DP8393X

hw/m68k/Makefile.objs

@@ -1,3 +1,4 @@
 obj-$(CONFIG_AN5206) += an5206.o mcf5206.o
 obj-$(CONFIG_MCF5208) += mcf5208.o mcf_intc.o
 obj-$(CONFIG_NEXTCUBE) += next-kbd.o next-cube.o
+obj-$(CONFIG_Q800) += q800.o

hw/m68k/bootinfo.h

@@ -0,0 +1,114 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+ *
+ * Bootinfo tags from linux bootinfo.h and bootinfo-mac.h:
+ * This is an easily parsable and extendable structure containing all
+ * information to be passed from the bootstrap to the kernel
+ *
+ * This structure is copied right after the kernel by the bootstrap
+ * routine.
+ */
+
+#ifndef HW_M68K_BOOTINFO_H
+#define HW_M68K_BOOTINFO_H
+struct bi_record {
+    uint16_t tag;        /* tag ID */
+    uint16_t size;       /* size of record */
+    uint32_t data[0];    /* data */
+};
+
+/* machine independent tags */
+
+#define BI_LAST         0x0000 /* last record */
+#define BI_MACHTYPE     0x0001 /* machine type (u_long) */
+#define BI_CPUTYPE      0x0002 /* cpu type (u_long) */
+#define BI_FPUTYPE      0x0003 /* fpu type (u_long) */
+#define BI_MMUTYPE      0x0004 /* mmu type (u_long) */
+#define BI_MEMCHUNK     0x0005 /* memory chunk address and size */
+                               /* (struct mem_info) */
+#define BI_RAMDISK      0x0006 /* ramdisk address and size */
+                               /* (struct mem_info) */
+#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */
+                               /* (string) */
+
+/*  Macintosh-specific tags (all u_long) */
+
+#define BI_MAC_MODEL    0x8000  /* Mac Gestalt ID (model type) */
+#define BI_MAC_VADDR    0x8001  /* Mac video base address */
+#define BI_MAC_VDEPTH   0x8002  /* Mac video depth */
+#define BI_MAC_VROW     0x8003  /* Mac video rowbytes */
+#define BI_MAC_VDIM     0x8004  /* Mac video dimensions */
+#define BI_MAC_VLOGICAL 0x8005  /* Mac video logical base */
+#define BI_MAC_SCCBASE  0x8006  /* Mac SCC base address */
+#define BI_MAC_BTIME    0x8007  /* Mac boot time */
+#define BI_MAC_GMTBIAS  0x8008  /* Mac GMT timezone offset */
+#define BI_MAC_MEMSIZE  0x8009  /* Mac RAM size (sanity check) */
+#define BI_MAC_CPUID    0x800a  /* Mac CPU type (sanity check) */
+#define BI_MAC_ROMBASE  0x800b  /* Mac system ROM base address */
+
+/*  Macintosh hardware profile data */
+
+#define BI_MAC_VIA1BASE 0x8010  /* Mac VIA1 base address (always present) */
+#define BI_MAC_VIA2BASE 0x8011  /* Mac VIA2 base address (type varies) */
+#define BI_MAC_VIA2TYPE 0x8012  /* Mac VIA2 type (VIA, RBV, OSS) */
+#define BI_MAC_ADBTYPE  0x8013  /* Mac ADB interface type */
+#define BI_MAC_ASCBASE  0x8014  /* Mac Apple Sound Chip base address */
+#define BI_MAC_SCSI5380 0x8015  /* Mac NCR 5380 SCSI (base address, multi) */
+#define BI_MAC_SCSIDMA  0x8016  /* Mac SCSI DMA (base address) */
+#define BI_MAC_SCSI5396 0x8017  /* Mac NCR 53C96 SCSI (base address, multi) */
+#define BI_MAC_IDETYPE  0x8018  /* Mac IDE interface type */
+#define BI_MAC_IDEBASE  0x8019  /* Mac IDE interface base address */
+#define BI_MAC_NUBUS    0x801a  /* Mac Nubus type (none, regular, pseudo) */
+#define BI_MAC_SLOTMASK 0x801b  /* Mac Nubus slots present */
+#define BI_MAC_SCCTYPE  0x801c  /* Mac SCC serial type (normal, IOP) */
+#define BI_MAC_ETHTYPE  0x801d  /* Mac builtin ethernet type (Sonic, MACE */
+#define BI_MAC_ETHBASE  0x801e  /* Mac builtin ethernet base address */
+#define BI_MAC_PMU      0x801f  /* Mac power management / poweroff hardware */
+#define BI_MAC_IOP_SWIM 0x8020  /* Mac SWIM floppy IOP */
+#define BI_MAC_IOP_ADB  0x8021  /* Mac ADB IOP */
+
+#define BOOTINFO0(as, base, id) \
+    do { \
+        stw_phys(as, base, id); \
+        base += 2; \
+        stw_phys(as, base, sizeof(struct bi_record)); \
+        base += 2; \
+    } while (0)
+
+#define BOOTINFO1(as, base, id, value) \
+    do { \
+        stw_phys(as, base, id); \
+        base += 2; \
+        stw_phys(as, base, sizeof(struct bi_record) + 4); \
+        base += 2; \
+        stl_phys(as, base, value); \
+        base += 4; \
+    } while (0)
+
+#define BOOTINFO2(as, base, id, value1, value2) \
+    do { \
+        stw_phys(as, base, id); \
+        base += 2; \
+        stw_phys(as, base, sizeof(struct bi_record) + 8); \
+        base += 2; \
+        stl_phys(as, base, value1); \
+        base += 4; \
+        stl_phys(as, base, value2); \
+        base += 4; \
+    } while (0)
+
+#define BOOTINFOSTR(as, base, id, string) \
+    do { \
+        int i; \
+        stw_phys(as, base, id); \
+        base += 2; \
+        stw_phys(as, base, \
+                 (sizeof(struct bi_record) + strlen(string) + 2) & ~1); \
+        base += 2; \
+        for (i = 0; string[i]; i++) { \
+            stb_phys(as, base++, string[i]); \
+        } \
+        stb_phys(as, base++, 0); \
+        base = (parameters_base + 1) & ~1; \
+    } while (0)
+#endif