lm32: remove lm32_sys

Since we have now semihosting on the lm32 target, this device is no longer
needed. Remove it.

Signed-off-by: Michael Walle <michael@walle.cc>

hw/misc/Makefile.objs

@@ -29,7 +29,6 @@ obj-$(CONFIG_NSERIES) += cbus.o
 obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o
 obj-$(CONFIG_EXYNOS4) += exynos4210_pmu.o
 obj-$(CONFIG_IMX) += imx_ccm.o
-obj-$(CONFIG_LM32) += lm32_sys.o
 obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o
 obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o
 obj-$(CONFIG_MAINSTONE) += mst_fpga.o

target-lm32/README

@@ -16,16 +16,6 @@ This will make serial0 (the lm32_uart) and serial1 (the JTAG UART)
 available as virtual consoles.
 
 
-Programmatically terminate the emulator
-----------------------------------------
-Originally neither the LatticeMico32 nor its peripherals support a
-mechanism to shut down the machine. Emulation aware programs can write to a
-to a special register within the system control block to shut down the
-virtual machine.  For more details see hw/lm32_sys.c. The lm32-evr is the
-first BSP which instantiate this model. A (32 bit) write to 0xfff0000
-causes a vm shutdown.
-
-
 Semihosting
 -----------
 Semihosting on this target is supported. Some system calls like read, write

trace-events

@@ -627,9 +627,6 @@ lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 lm32_uart_irq_state(int level) "irq state %d"
 
-# hw/misc/lm32_sys.c
-lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
-
 # hw/scsi/megasas.c
 megasas_init_firmware(uint64_t pa) "pa %" PRIx64 " "
 megasas_init_queue(uint64_t queue_pa, int queue_len, uint64_t head, uint64_t tail, uint32_t flags) "queue at %" PRIx64 " len %d head %" PRIx64 " tail %" PRIx64 " flags %x"