Merge branch 'arm-devs.for-upstream' of git://git.linaro.org/people/p…

…maydell/qemu-arm

* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  Versatile Express: Add modelling of NOR flash
  Versatile Express: Fix NOR flash 0 address and remove flash alias
  hw/armv7m_nvic: Correctly register GIC region when setting up NVIC
  pl190: fix read of VECTADDR

hw/armv7m_nvic.c

@@ -489,7 +489,8 @@ static int armv7m_nvic_init(SysBusDevice *dev)
      */
     memory_region_init_alias(&s->gic_iomem_alias, "nvic-gic", &s->gic.iomem,
                              0x100, 0xc00);
-    memory_region_add_subregion_overlap(&s->container, 0x100, &s->gic.iomem, 1);
+    memory_region_add_subregion_overlap(&s->container, 0x100,
+                                        &s->gic_iomem_alias, 1);
     /* Map the whole thing into system memory at the location required
      * by the v7M architecture.
      */

hw/pl190.c

@@ -117,12 +117,18 @@ static uint64_t pl190_read(void *opaque, target_phys_addr_t offset,
         return s->protected;
     case 12: /* VECTADDR */
         /* Read vector address at the start of an ISR.  Increases the
-           current priority level to that of the current interrupt.  */
-        for (i = 0; i < s->priority; i++)
-          {
-            if ((s->level | s->soft_level) & s->prio_mask[i])
-              break;
-          }
+         * current priority level to that of the current interrupt.
+         *
+         * Since an enabled interrupt X at priority P causes prio_mask[Y]
+         * to have bit X set for all Y > P, this loop will stop with
+         * i == the priority of the highest priority set interrupt.
+         */
+        for (i = 0; i < s->priority; i++) {
+            if ((s->level | s->soft_level) & s->prio_mask[i + 1]) {
+                break;
+            }
+        }
+
         /* Reading this value with no pending interrupts is undefined.
            We return the default address.  */
         if (i == PL190_NUM_PRIO)

hw/vexpress.c

@@ -29,8 +29,12 @@
 #include "sysemu.h"
 #include "boards.h"
 #include "exec-memory.h"
+#include "blockdev.h"
+#include "flash.h"
 
 #define VEXPRESS_BOARD_ID 0x8e0
+#define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024)
+#define VEXPRESS_FLASH_SECT_SIZE (256 * 1024)
 
 static struct arm_boot_info vexpress_binfo;
 
@@ -62,7 +66,6 @@ enum {
     VE_COMPACTFLASH,
     VE_CLCD,
     VE_NORFLASH0,
-    VE_NORFLASH0ALIAS,
     VE_NORFLASH1,
     VE_SRAM,
     VE_VIDEORAM,
@@ -104,9 +107,8 @@ static target_phys_addr_t motherboard_legacy_map[] = {
 };
 
 static target_phys_addr_t motherboard_aseries_map[] = {
-    /* CS0: 0x00000000 .. 0x0c000000 */
-    [VE_NORFLASH0] = 0x00000000,
-    [VE_NORFLASH0ALIAS] = 0x08000000,
+    /* CS0: 0x08000000 .. 0x0c000000 */
+    [VE_NORFLASH0] = 0x08000000,
     /* CS4: 0x0c000000 .. 0x10000000 */
     [VE_NORFLASH1] = 0x0c000000,
     /* CS5: 0x10000000 .. 0x14000000 */
@@ -357,6 +359,7 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
     qemu_irq pic[64];
     uint32_t proc_id;
     uint32_t sys_id;
+    DriveInfo *dinfo;
     ram_addr_t vram_size, sram_size;
     MemoryRegion *sysmem = get_system_memory();
     MemoryRegion *vram = g_new(MemoryRegion, 1);
@@ -412,9 +415,25 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
 
     sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
 
-    /* VE_NORFLASH0: not modelled */
-    /* VE_NORFLASH0ALIAS: not modelled */
-    /* VE_NORFLASH1: not modelled */
+    dinfo = drive_get_next(IF_PFLASH);
+    if (!pflash_cfi01_register(map[VE_NORFLASH0], NULL, "vexpress.flash0",
+            VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
+            VEXPRESS_FLASH_SECT_SIZE,
+            VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
+            0x00, 0x89, 0x00, 0x18, 0)) {
+        fprintf(stderr, "vexpress: error registering flash 0.\n");
+        exit(1);
+    }
+
+    dinfo = drive_get_next(IF_PFLASH);
+    if (!pflash_cfi01_register(map[VE_NORFLASH1], NULL, "vexpress.flash1",
+            VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
+            VEXPRESS_FLASH_SECT_SIZE,
+            VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
+            0x00, 0x89, 0x00, 0x18, 0)) {
+        fprintf(stderr, "vexpress: error registering flash 1.\n");
+        exit(1);
+    }
 
     sram_size = 0x2000000;
     memory_region_init_ram(sram, "vexpress.sram", sram_size);