Basic keycode overhaul (#14726)

docs/config_options.md

@@ -206,7 +206,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define TAP_CODE_DELAY 100`
   * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
 * `#define TAP_HOLD_CAPS_DELAY 80`
-  * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
+  * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPS_LOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
 * `#define KEY_OVERRIDE_REPEAT_DELAY 500`
   * Sets the key repeat interval for [key overrides](feature_key_overrides.md).
 

docs/configurator_default_keymaps.md

@@ -46,7 +46,7 @@ Now that we have the commit hash, we need the keymap (edited for readability):
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [0] = LAYOUT_all(
-    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,              KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,              KC_PSCR, KC_SCRL, KC_PAUS,
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,             KC_DEL,  KC_END,  KC_PGDN,
     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
@@ -74,7 +74,7 @@ The default keymap uses the `LAYOUT_all` macro, so that will be the value of the
   "layout": "LAYOUT_all",
   "layers": [
     [
-      "KC_ESC",             "KC_F1",   "KC_F2",   "KC_F3",   "KC_F4",   "KC_F5",   "KC_F6",   "KC_F7",   "KC_F8",   "KC_F9",   "KC_F10",  "KC_F11",  "KC_F12",                "KC_PSCR", "KC_SLCK", "KC_PAUS",
+      "KC_ESC",             "KC_F1",   "KC_F2",   "KC_F3",   "KC_F4",   "KC_F5",   "KC_F6",   "KC_F7",   "KC_F8",   "KC_F9",   "KC_F10",  "KC_F11",  "KC_F12",                "KC_PSCR", "KC_SCRL", "KC_PAUS",
       "KC_GRV",  "KC_1",    "KC_2",    "KC_3",    "KC_4",    "KC_5",    "KC_6",    "KC_7",    "KC_8",    "KC_9",    "KC_0",    "KC_MINS", "KC_EQL",  "KC_BSPC", "KC_BSPC",    "KC_INS",  "KC_HOME", "KC_PGUP",
       "KC_TAB",  "KC_Q",    "KC_W",    "KC_E",    "KC_R",    "KC_T",    "KC_Y",    "KC_U",    "KC_I",    "KC_O",    "KC_P",    "KC_LBRC", "KC_RBRC", "KC_BSLS",               "KC_DEL",  "KC_END",  "KC_PGDN",
       "KC_CAPS", "KC_A",    "KC_S",    "KC_D",    "KC_F",    "KC_G",    "KC_H",    "KC_J",    "KC_K",    "KC_L",    "KC_SCLN", "KC_QUOT", "KC_NUHS", "KC_ENT",

docs/faq_keymap.md

@@ -19,7 +19,7 @@ There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JI
 Sometimes, for readability's sake, it's useful to define custom names for some keycodes. People often define custom names using `#define`. For example:
 
 ```c
-#define FN_CAPS LT(_FL, KC_CAPSLOCK)
+#define FN_CAPS LT(_FL, KC_CAPS)
 #define ALT_TAB LALT(KC_TAB)
 ```
 
@@ -38,16 +38,16 @@ As a quick fix try holding down `Space`+`Backspace` while you plug in your keybo
 
 The key found on most modern keyboards that is located between `KC_RGUI` and `KC_RCTL` is actually called `KC_APP`. This is because when that key was invented there was already a key named `MENU` in the relevant standards, so MS chose to call that the `APP` key.
 
-## `KC_SYSREQ` Isn't Working
-Use keycode for Print Screen(`KC_PSCREEN` or `KC_PSCR`) instead of `KC_SYSREQ`. Key combination of 'Alt + Print Screen' is recognized as 'System request'.
+## `KC_SYSTEM_REQUEST` Isn't Working
+Use keycode for Print Screen (`KC_PRINT_SCREEN`/`KC_PSCR`) instead of `KC_SYSTEM_REQUEST`. Key combination of 'Alt + Print Screen' is recognized as 'System request'.
 
 See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and
 * https://en.wikipedia.org/wiki/Magic_SysRq_key
 * https://en.wikipedia.org/wiki/System_request
 
 ## Power Keys Aren't Working
 
-Somewhat confusingly, there are two "Power" keycodes in QMK: `KC_POWER` in the Keyboard/Keypad HID usage page, and `KC_SYSTEM_POWER` (or `KC_PWR`) in the Consumer page.
+Somewhat confusingly, there are two "Power" keycodes in QMK: `KC_KB_POWER` in the Keyboard/Keypad HID usage page, and `KC_SYSTEM_POWER` (or `KC_PWR`) in the Consumer page.
 
 The former is only recognized on macOS, while the latter, `KC_SLEP` and `KC_WAKE` are supported by all three major operating systems, so it is recommended to use those instead. Under Windows, these keys take effect immediately, however on macOS they must be held down until a dialog appears.
 
@@ -57,7 +57,7 @@ https://github.com/tmk/tmk_keyboard/issues/67
 
 ## Modifier/Layer Stuck
 Modifier keys or layers can be stuck unless layer switching is configured properly.
-For Modifier keys and layer actions you have to place `KC_TRANS` on same position of destination layer to  unregister the modifier key or return to previous layer on release event.
+For Modifier keys and layer actions you have to place `KC_TRNS` on same position of destination layer to  unregister the modifier key or return to previous layer on release event.
 
 * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching
 * https://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
@@ -75,7 +75,7 @@ This feature is for *mechanical lock switch* like [this Alps one](https://deskth
 
 After enabling this feature use keycodes `KC_LCAP`, `KC_LNUM` and `KC_LSCR` in your keymap instead.
 
-Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.***
+Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NUM` and `KC_SCRL`.***
 
 ## Input Special Characters Other Than ASCII like Cédille 'Ç'
 

docs/feature_auto_shift.md

@@ -127,7 +127,7 @@ bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) {
 #    ifndef NO_AUTO_SHIFT_SPECIAL
         case KC_TAB:
         case KC_MINUS ... KC_SLASH:
-        case KC_NONUS_BSLASH:
+        case KC_NONUS_BACKSLASH:
 #    endif
             return true;
     }

docs/feature_combo.md

@@ -173,7 +173,7 @@ uint16_t get_combo_term(uint16_t index, combo_t *combo) {
     // i.e. the exact array of keys you defined for the combo.
     // This can be useful if your combos have a common key and you want to apply the
     // same combo term for all of them.
-    if (combo->keys[0] == KC_ENTER) { // if first key in the array is KC_ENTER
+    if (combo->keys[0] == KC_ENT) { // if first key in the array is Enter
         return 150;
     }
 

docs/feature_grave_esc.md

@@ -4,7 +4,7 @@ If you're using a 60% keyboard, or any other layout with no F-row, you will have
 
 ## Usage
 
-Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
+Replace the `KC_GRV` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
 
 ## What Your OS Sees
 

docs/feature_haptic_feedback.md

@@ -184,7 +184,7 @@ The Haptic Exclusion is implemented as `__attribute__((weak)) bool get_haptic_en
 ### NO_HAPTIC_MOD
 With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will not trigger feedback:
 
-* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`)
+* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTL`)
 * `MO()` momentary keys. See also [Layers](feature_layers.md).
 * `LM()` momentary keys with mod active.
 * `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered.

docs/feature_key_overrides.md

@@ -39,7 +39,7 @@ For more customization possibilities, you may directly create a `key_override_t`
 This shows how the mentioned example of sending `delete` when `shift` + `backspace` are pressed is realized:
 
 ```c
-const key_override_t delete_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_BSPACE, KC_DELETE);
+const key_override_t delete_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_BSPC, KC_DEL);
 
 // This globally defines all key overrides to be used
 const key_override_t **key_overrides = (const key_override_t *[]){
@@ -107,10 +107,10 @@ The [Grave Escape feature](feature_grave_esc.md) is limited in its configurabili
 
 ```c
 // Shift + esc = ~
-const key_override_t tilde_esc_override = ko_make_basic(MOD_MASK_SHIFT, KC_ESC, S(KC_GRAVE));
+const key_override_t tilde_esc_override = ko_make_basic(MOD_MASK_SHIFT, KC_ESC, S(KC_GRV));
 
 // GUI + esc = `
-const key_override_t grave_esc_override = ko_make_basic(MOD_MASK_GUI, KC_ESC, KC_GRAVE);
+const key_override_t grave_esc_override = ko_make_basic(MOD_MASK_GUI, KC_ESC, KC_GRV);
 
 const key_override_t **key_overrides = (const key_override_t *[]){
 	&tilde_esc_override,

docs/feature_macros.md

@@ -118,7 +118,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case KC_A ... KC_F21: //notice how it skips over F22
-    case KC_F23 ... KC_EXSEL: //exsel is the last one before the modifier keys
+    case KC_F23 ... KC_EXSL: //exsel is the last one before the modifier keys
       if (!record->event.pressed) {
         f22_tracker--;
         if (!f22_tracker) {

docs/feature_tap_dance.md

@@ -299,7 +299,7 @@ void x_finished(qk_tap_dance_state_t *state, void *user_data) {
     xtap_state.state = cur_dance(state);
     switch (xtap_state.state) {
         case TD_SINGLE_TAP: register_code(KC_X); break;
-        case TD_SINGLE_HOLD: register_code(KC_LCTRL); break;
+        case TD_SINGLE_HOLD: register_code(KC_LCTL); break;
         case TD_DOUBLE_TAP: register_code(KC_ESC); break;
         case TD_DOUBLE_HOLD: register_code(KC_LALT); break;
         // Last case is for fast typing. Assuming your key is `f`:
@@ -312,7 +312,7 @@ void x_finished(qk_tap_dance_state_t *state, void *user_data) {
 void x_reset(qk_tap_dance_state_t *state, void *user_data) {
     switch (xtap_state.state) {
         case TD_SINGLE_TAP: unregister_code(KC_X); break;
-        case TD_SINGLE_HOLD: unregister_code(KC_LCTRL); break;
+        case TD_SINGLE_HOLD: unregister_code(KC_LCTL); break;
         case TD_DOUBLE_TAP: unregister_code(KC_ESC); break;
         case TD_DOUBLE_HOLD: unregister_code(KC_LALT);
         case TD_DOUBLE_SINGLE_TAP: unregister_code(KC_X);

docs/feature_wpm.md

@@ -35,7 +35,7 @@ bool wpm_keycode_user(uint16_t keycode) {
     } else if (keycode > 0xFF) {
         keycode = 0;
     }
-    if ((keycode >= KC_A && keycode <= KC_0) || (keycode >= KC_TAB && keycode <= KC_SLASH)) {
+    if ((keycode >= KC_A && keycode <= KC_0) || (keycode >= KC_TAB && keycode <= KC_SLSH)) {
         return true;
     }