rename kprepublic bm keyboards to have a standardized naming format

keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/readme.md

@@ -4,13 +4,13 @@
 
 - Compile:
 
-  `qmk compile -kb bm40hsrgb -km gabustoledo`
+  `qmk compile -kb kprepublic/bm40hsrgb -km gabustoledo`
 
 ### Flash
 
 - Flash:
 
-  `qmk flash -kb bm40hsrgb -km gabustoledo`
+  `qmk flash -kb kprepublic/bm40hsrgb -km gabustoledo`
 
 # Layout
 

keyboards/kprepublic/bm40hsrgb/keymaps/signynt/readme.md

@@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways:
 
 - to directly flash to board:
 
-  `qmk flash -kb bm40hsrgb -km signynt`
+  `qmk flash -kb kprepublic/bm40hsrgb -km signynt`
 
 - to only compile:
 
-  `qmk compile -kb bm40hsrgb -km signynt`
+  `qmk compile -kb kprepublic/bm40hsrgb -km signynt`
 
 
 

keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/readme.md

@@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways:
 
 - to directly flash to board:
 
-  `qmk flash -kb bm40hsrgb -km signynt`
+  `qmk flash -kb kprepublic/bm40hsrgb -km signynt`
 
 - to only compile:
 
-  `qmk compile -kb bm40hsrgb -km signynt`
+  `qmk compile -kb kprepublic/bm40hsrgb -km signynt`
 
 
 

keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/readme.md

@@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways:
 
 - to directly flash to board:
 
-  `qmk flash -kb bm40hsrgb -km signynt`
+  `qmk flash -kb kprepublic/bm40hsrgb -km signynt`
 
 - to only compile:
 
-  `qmk compile -kb bm40hsrgb -km signynt`
+  `qmk compile -kb kprepublic/bm40hsrgb -km signynt`
 
 
 

keyboards/kprepublic/bm43a/keymaps/stevexyz/readme.md

@@ -19,7 +19,7 @@ And a view on the actual build:
 
 ![layout](https://raw.githubusercontent.com/stevexyz/qmk_firmware/master/keyboards/bm43a/keymaps/stevexyz/actualbuild.jpeg)
 
-In order to compile the module from qmk root directory use the command 'make bm43a:stevexyz'
+In order to compile the module from qmk root directory use the command 'make kprepublic/bm43a:stevexyz'
 
-And in order to upload the new firmware use the command: 'qmk flash -kb bm43a -km stevexyz' (you can initiate programming with keyboard RESET key, that in this keymap has been moved on the backspace button in the "lights" layer)
+And in order to upload the new firmware use the command: 'qmk flash -kb kprepublic/bm43a -km stevexyz' (you can initiate programming with keyboard RESET key, that in this keymap has been moved on the backspace button in the "lights" layer)
 

keyboards/kprepublic/bm60rgb/readme.md → keyboards/kprepublic/bm60hsrgb/readme.md

@@ -1,13 +1,13 @@
-# BM60 RGB
+# BM60HSRGB
 
 A 60% hotswap inswitch RGB keyboard from KP Republic. 
 
 * Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
-* Hardware Supported: BM60 RGB
+* Hardware Supported: BM60HSRGB
 * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kprepublic/bm60rgb/rev1:default
+    make kprepublic/bm60hsrgb/rev1:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kprepublic/bm60rgb/rev1/config.h → keyboards/kprepublic/bm60hsrgb/rev1/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0xEF8C
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KP Republic
-#define PRODUCT         BM60 RGB
+#define PRODUCT         BM60HSRGB
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/kprepublic/bm60rgb/rev1/info.json → keyboards/kprepublic/bm60hsrgb/rev1/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "BM60 RGB",
+    "keyboard_name": "BM60HSRGB",
     "url": "",
     "maintainer": "qmk",
     "layout_aliases": {

keyboards/kprepublic/bm60rgb_iso/readme.md → keyboards/kprepublic/bm60hsrgb_iso/readme.md

@@ -1,6 +1,6 @@
-# BM60 RGB ISO
+# BM60HSRGB_ISO
 
-![BM60 RGB ISO](https://i.imgur.com/i3gk2vql.jpg)
+![BM60HSRGB_ISO](https://i.imgur.com/i3gk2vql.jpg)
 
 A 60% ISO hotswap inswitch RGB keyboard.
 
@@ -10,10 +10,10 @@ A 60% ISO hotswap inswitch RGB keyboard.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kprepublic/bm60rgb_iso/rev1:default
+    make kprepublic/bm60hsrgb_iso/rev1:default
 
 Flashing example for this keyboard:
 
-    make kprepublic/bm60rgb_iso:default:flash
+    make kprepublic/bm60hsrgb_iso:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kprepublic/bm60rgb_iso/rev1/config.h → keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0xEF8C
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KPRepublic
-#define PRODUCT         bm60hsrgb-iso
+#define PRODUCT         BM60HSRGB_ISO
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/kprepublic/bm60rgb_iso/rev1/info.json → keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "BM60 RGB ISO",
+    "keyboard_name": "BM60HSRGB_ISO",
     "url": "",
     "maintainer": "qmk",
     "layouts": {

keyboards/kprepublic/bm60poker/readme.md → keyboards/kprepublic/bm60hsrgb_poker/readme.md

@@ -1,13 +1,13 @@
-# BM60 Poker 60% Mechanical Keyboard RGB PCB
+# BM60HSRGB_Poker 60% Mechanical Keyboard RGB PCB
 
 A 60% hotswap inswitch RGB (north facing) keyboard from KP Republic. 
 
 * Keyboard Maintainer: [ipetepete](https://github.com/ipetepete)
-* Hardware Supported: BM60 POKER RGB
+* Hardware Supported: BM60HSRGB_Poker
 * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-poker-60-gh60-hot-swap-custom-mechanical-keyboard-pcb-program-qmk-underglow-type-c)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kprepublic/bm60poker/rev1:default
+    make kprepublic/bm60hsrgb_poker/rev1:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kprepublic/bm60poker/rev1/config.h → keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0xEF8D
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KP Republic
-#define PRODUCT         BM60 RGB POKER
+#define PRODUCT         BM60HSRGB_POKER
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/kprepublic/bm60poker/rev1/info.json → keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "BM60 POKER RGB",
+    "keyboard_name": "BM60HSRGB_POKER",
     "url": "",
     "maintainer": "qmk",
     "layouts": {

keyboards/kprepublic/bm65rgb/rev1/readme.md → keyboards/kprepublic/bm65hsrgb/readme.md

@@ -1,20 +1,20 @@
-# bm65rgb
+# BM65HSRGB
 
-![bm65rgb](https://i.imgur.com/DskSCve.jpeg)
+![BM65HSRGB](https://i.imgur.com/DskSCve.jpeg)
 
 A 65% hotswap in switch RGB keyboard from KPRepublic.
 
 * Keyboard Maintainer: [bytesapart](https://github.com/bytesapart)
-* Hardware Supported: BM65 RGB
+* Hardware Supported: BM65HSRGB
 * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm65rgb-bm65-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c?_pos=1&_sid=5b9a6a5d0&_ss=r)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kprepublic/bm65rgb/rev1:default
+    make kprepublic/bm65hsrgb/rev1:default
 
 Flashing example for this keyboard:
 
-    make kprepublic/bm65rgb/rev1:default:flash
+    make kprepublic/bm65hsrgb/rev1:default:flash
 
 To reset the board into bootloader mode, do one of the following:
 

keyboards/kprepublic/bm65rgb/rev1/config.h → keyboards/kprepublic/bm65hsrgb/rev1/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID   0xEF6E
 #define DEVICE_VER   0x0001
 #define MANUFACTURER KPRepublic
-#define PRODUCT      BM65 RGB
+#define PRODUCT      BM65HSRGB
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/kprepublic/bm65rgb/rev1/info.json → keyboards/kprepublic/bm65hsrgb/rev1/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "bm65rgb",
+    "keyboard_name": "BM65HSRGB",
     "url": "",
     "maintainer": "bytesapart",
     "layouts": {

keyboards/kprepublic/bm65iso/bm65iso.c → keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "bm65iso.h"
+#include "bm65hsrgb_iso.h"
 
 #ifdef RGB_MATRIX_ENABLE
 led_config_t g_led_config = { {

keyboards/kprepublic/bm65iso/config.h → keyboards/kprepublic/bm65hsrgb_iso/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x0653
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KP Republic
-#define PRODUCT         BM65ISO
+#define PRODUCT         BM65HSRGB_ISO
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/kprepublic/bm65iso/info.json → keyboards/kprepublic/bm65hsrgb_iso/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "bm65iso",
+    "keyboard_name": "BM65HSRGB_ISO",
     "url": "",
     "maintainer": "qmk",
     "layouts": {

keyboards/kprepublic/bm65iso/keymaps/deadolus/readme.md → keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md

@@ -11,10 +11,10 @@
 
 Make example for this keyboard (after setting up your build environment):
 
-    make bm65iso:deadolus
+    make kprepublic/bm65hsrgb_iso:deadolus
 
 Flashing example for this keyboard:
 
-    make bm65iso:deadolus:flash
+    make kprepublic/bm65hsrgb_iso:deadolus:flash
 
 Keyboard Maintainer: **[deadolus](https://github.com/deadolus)**

keyboards/kprepublic/bm65iso/readme.md → keyboards/kprepublic/bm65hsrgb_iso/readme.md

@@ -1,20 +1,20 @@
-# bm65iso
+# BM65HSRGB_ISO
 
-![bm65iso](https://ae01.alicdn.com/kf/He2fd118856c7490292bc3c299049fdbcp.jpg)
+![BM65HSRGB_ISO](https://ae01.alicdn.com/kf/He2fd118856c7490292bc3c299049fdbcp.jpg)
 
 A 65% hotswap in switch RGB keyboard from KPRepublic.
 
 * Keyboard Maintainer: [deadolus](https://github.com/deadolus)
-* Hardware Supported: BM65 ISO
+* Hardware Supported: BM65HSRGB_ISO
 * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm65rgb-bm65-iso-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-rgb-switch-underglow-type-c)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kprepublic/bm65iso:default
+    make kprepublic/bm65hsrgb_iso:default
 
 Flashing example for this keyboard:
 
-    make kprepublic/bm65iso:default:flash
+    make kprepublic/bm65hsrgb_iso:default:flash
 
 To reset the board into bootloader mode, do one of the following:
 

keyboards/kprepublic/bm68rgb/bm68rgb.c → keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "bm68rgb.h"
+#include "bm68hsrgb.h"
 
 #ifdef RGB_MATRIX_ENABLE
 led_config_t g_led_config = { {

keyboards/kprepublic/bm68rgb/config.h → keyboards/kprepublic/bm68hsrgb/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID   0xEF6F
 #define DEVICE_VER   0x0001
 #define MANUFACTURER KPRepublic
-#define PRODUCT      BM68 RGB
+#define PRODUCT      BM68HSRGB
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/kprepublic/bm68rgb/info.json → keyboards/kprepublic/bm68hsrgb/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "bm68rgb",
+    "keyboard_name": "BM68HSRGB",
     "url": "",
     "maintainer": "peepeetee",
     "layouts": {

keyboards/kprepublic/bm68rgb/readme.md → keyboards/kprepublic/bm68hsrgb/readme.md

@@ -1,20 +1,20 @@
-# bm68rgb
+# BM68HSRGB
 
-![bm68rgb](https://i.imgur.com/uuYP8OIl.jpeg)
+![BM68HSRGB](https://i.imgur.com/uuYP8OIl.jpeg)
 
 A 65% hotswap in switch RGB keyboard from KPRepublic.
 
 * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
-* Hardware Supported: BM68 RGB
+* Hardware Supported: BM68HSRGB
 * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm68rgb-bm68-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kprepublic/bm68rgb:default
+    make kprepublic/bm68hsrgb:default
 
 Flashing example for this keyboard:
 
-    make kprepublic/bm68rgb:default:flash
+    make kprepublic/bm68hsrgb:default:flash
 
 To reset the board into bootloader mode, do one of the following:
 

keyboards/kprepublic/bm80/bm80.c → keyboards/kprepublic/bm80hsrgb/bm80hsrgb.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "bm80.h"
+#include "bm80hsrgb.h"
 
 #ifdef RGB_MATRIX_ENABLE
 led_config_t g_led_config = { {
@@ -27,12 +27,12 @@ led_config_t g_led_config = { {
 	{ 63,     64,     65,     66,     67,     68,     69,     70,     71,     72,     73, NO_LED,     74, NO_LED, NO_LED,     75, NO_LED },
 	{ 76,     77,     78,     NO_LED, NO_LED, 79, NO_LED, NO_LED, NO_LED,     80,     81,     82,     83,     84, NO_LED,     85,     86 }
 
-//     K0_0,       K0_2, K0_3, K0_4, K0_5,   K0_7, K0_8, K0_9, K0_A,   K0_B, K0_C, K3_C, K0_D,   K0_E, K0_F, K0_10, 
-//     K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C,    K1_D,    K1_E, K1_F, K1_10, 
-//      K2_0,   K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C,   K2_D,  K2_E, K2_F, K2_10, 
-//      K3_0,    K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B,       K3_D,                      
-//       K4_0,     K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A,     K4_C,               K4_F,        
-//     K5_0,  K5_1,  K5_2,             K5_5,                       K5_9, K5_A, K5_B, K5_C,       K5_D, K5_F, K5_10  
+//     K0_0,       K0_2, K0_3, K0_4, K0_5,   K0_7, K0_8, K0_9, K0_A,   K0_B, K0_C, K3_C, K0_D,   K0_E, K0_F, K0_10,
+//     K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C,    K1_D,    K1_E, K1_F, K1_10,
+//      K2_0,   K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C,   K2_D,  K2_E, K2_F, K2_10,
+//      K3_0,    K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B,       K3_D,
+//       K4_0,     K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A,     K4_C,               K4_F,
+//     K5_0,  K5_1,  K5_2,             K5_5,                       K5_9, K5_A, K5_B, K5_C,       K5_D, K5_F, K5_10
 
 
 // 	   K0_0,  KC_NO, K0_2,  K0_3,  K0_4,  K0_5,  KC_NO, K0_7,  K0_8,  K0_9,  K0_A,  K0_B,  K0_C,  K0_D,  K0_E,  K0_F,  K0_10
@@ -130,7 +130,7 @@ led_config_t g_led_config = { {
      * │ 63     │ 64│ 65│ 66│ 67│ 68│ 69│ 70│ 71│ 72│ 73│    74    │     │ 75│
      * └────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴──────────┘     └───┘
      */
-     1, 1, 1, 4, 1, 1, 1, 1,                    1, 1, 1 
+     1, 1, 1, 4, 1, 1, 1, 1,                    1, 1, 1
     /*
      * ┌────┬────┬────┬────────────────────────┬────┬────┬────┬────┐ ┌───┬───┬───┐
      * │ 76 │ 77 │ 78 │           79           │ 80 │ 81 │ 82 │ 83 │ │ 84│ 85│ 86│

keyboards/kprepublic/bm80/info.json → keyboards/kprepublic/bm80hsrgb/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "bm80",
+    "keyboard_name": "BM80HSRGB",
     "url": "",
     "maintainer": "peepeetee",
     "layouts": {
@@ -95,4 +95,4 @@
             ]
         }
     }
-}
+}