Add keyboard: Vault35 WKL universal

keyboards/jlw/vault35_wkl_universal/config.h

@@ -0,0 +1,11 @@
+// Copyright 2024 jlw
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define WS2812_PWM_DRIVER PWMD17
+#define WS2812_PWM_CHANNEL 1
+#define WS2812_PWM_PAL_MODE 2
+#define WS2812_PWM_COMPLEMENTARY_OUTPUT
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM1
+#define WS2812_DMA_CHANNEL 1

keyboards/jlw/vault35_wkl_universal/halconf.h

@@ -0,0 +1,8 @@
+// Copyright 2024 jlw
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/jlw/vault35_wkl_universal/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+// Copyright 2024 jlw
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all(
+         KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,     KC_VOLU,      KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,
+         KC_A,   KC_S,   KC_D,   KC_F,   KC_G,     KC_VOLD,      KC_H,   KC_J,   KC_K,    KC_L,   KC_QUOT,
+         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,     RGB_TOG,      KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,
+         KC_ESC,         MO(1),  KC_ENT, KC_LEFT,  KC_DOWN,      KC_UP,  KC_RIGHT,                KC_BSPC
+    ),
+
+    [1] = LAYOUT_all(
+         _______,  _______,  _______,  _______,  _______,  _______, _______,  KC_7,     KC_8,     KC_9,    KC_0,
+         _______,  _______,  _______,  _______,  _______,  _______, _______,  KC_4,     KC_5,     KC_6,    _______,
+         _______,  _______,  _______,  _______,  _______,  QK_BOOT, _______,  KC_1,     KC_2,     KC_3,    _______,
+         _______,            _______,  _______,  _______,  _______, _______,  MO(2),                       _______
+    ),
+
+    [2] = LAYOUT_all(
+         _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+         _______,  _______,  _______,  _______,  _______,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_LEFT,  _______,
+         _______,  _______,  _______,  _______,  _______,  QK_BOOT,  _______,  _______,  _______,  _______,  _______,
+         _______,            _______,  _______,  _______,  _______,  _______,  _______,                      _______
+    )
+};
+
+#ifdef ENCODER_MAP_ENABLE
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =   { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [1] =   { ENCODER_CCW_CW(RGB_HUD, RGB_HUI) },
+    [2] =   { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) }
+};
+#endif
+

keyboards/jlw/vault35_wkl_universal/keymaps/default/rules.mk

@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes

keyboards/jlw/vault35_wkl_universal/mcuconf.h

@@ -0,0 +1,11 @@
+// Copyright 2024 jlw
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM17
+#define STM32_PWM_USE_TIM17 TRUE
+#define STM32_TIM17_SUPPRESS_ISR
+

keyboards/jlw/vault35_wkl_universal/readme.md

@@ -0,0 +1,27 @@
+# Vault 35 WKL Universal
+
+![Vault 35 WKL Universal](https://i.imgur.com/gtJwgiv.png)
+
+A drop in replacement PCB for the Vault 35 WKL case, originally designed by ProjectCain Mechvault.
+
+* Keyboard Maintainer: [jlw](https://github.com/josh-l-wang)
+* Hardware Supported: Vault 35 WKL Universal PCB
+* Hardware Availability: [jlw-kb.com](https://jlw-kb.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make jlw/vault35_wkl_universal:default
+
+Flashing example for this keyboard:
+
+    make jlw/vault35_wkl_universal:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
+* **Physical reset button**: Hold button on the back of the PCB while plugging in the PCB
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/jlw/vault35_wkl_universal/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank