kasli-ft4232h.conf.in

# Kasli FT4232H EEPROM configuration
# Adjust the serial number below!
# Do not change the product name, vendor_id, or product_id.
#
# Usage (given Kasli is at port 1-4):
#   ftdi_eeprom --device d:`cat /sys/bus/usb/devices/1-4/busnum`/`cat /sys/bus/usb/devices/1-4/devnum` --flash-eeprom kasli-ft4232h.conf

vendor_id=0x0403
product_id=0x6011
self_powered=false
max_power=150  # mA
use_serial=true
eeprom_type=0x00  # 128 byte
cha_vcp=false  # JTAG
chb_vcp=false  # I2C
chc_vcp=true   # UART
chd_vcp=false  # GPIO

manufacturer="ARTIQ/Sinara"
product="Quad RS232-HS"
# serial number sticker: '#2' but pyftdi doesn't like the #
serial="FT_SERIAL"
# filename="kasli-ft4232h.bin"