Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
C C++ Other
branch: master

kernel: Bump to 4.0.7

kernel: BCM270X_DT: Change pio_limit of sdhost driver to 1

kernel: spi-bcm2708: Increase timeout from 150ms to 1s
kernel: i2c-bcm2708: Increase timeouts to allow larger transfers
See: raspberrypi/linux#260

kernel: spi-bcm2835: Support pin groups other than 7-11

kernel: bcm2835-sdhost: Further improve overclock back-off

kernel: bcm2708-vcio: Remove restriction of only a single instance being open

kernel: uart1: Only create /dev/ttyS0 when the overlay is applied

firmware: video_encode: Set nPortindex for BitRate too
See: Hexxeh/rpi-firmware#86

firmware: dispmanx: Allow exclusive elements like TAB/FP to share LBM

firmware: dispmanx: Early frame sequential 3d support

firmware: arm_loader: Distinguish parameter success/failure
latest commit 89881b5488
@popcornmix popcornmix authored

README

This repository contains pre-compiled binaries of the current Raspberry Pi 
kernel and modules, userspace libraries, and bootloader/GPU firmware.

A rough guide to this repository and the licences covering its contents is 
below (check the appropriate directories for full licence details):

* ./boot: *start.elf, bootcode.bin are the GPU firmware and bootloaders. 
  Their licence is described in 'LICENCE.broadcom'. The kernel.img files
  are builds of the Linux kernel, released under the GPL (see COPYING.linux)
* ./debug: pre-build modules for the kernel_debug.img
* ./extra: System.map files for the provided kernel builds
* ./hardfp: userspace VideoCoreIV libraries built for the armv6 hardfp ABI
* ./modules: pre-built modules for kernel.img
* ./opt/vc: includes userspace libraries for the VideoCoreIV (EGL/GLES/OpenVG 
   etc). See ./opt/vc/LICENCE for licencing terms
Something went wrong with that request. Please try again.