Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Changes queued in gpio/next for the start of the 3.3 merge window

* tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Add decode of WM8994 GPIO configuration
  gpio: Convert GPIO drivers to module_platform_driver
  gpio: Fix typo in comment in Samsung driver
  gpio: Explicitly index samsung_gpio_cfgs
  gpio: Add Linus Walleij as gpio co-maintainer
  of: Add device tree selftests
  of: create of_phandle_args to simplify return of phandle parsing data
  gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()
  gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()
  gpiolib: output basic details and consolidate gpio device drivers
  pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH
  spi/pl022: make the chip deselect handling thread safe
  spi/pl022: add support for pm_runtime autosuspend
  spi/pl022: disable the PL022 block when unused
  spi/pl022: move device disable to workqueue thread
  spi/pl022: skip default configuration before suspending
  spi/pl022: fix build warnings
  spi/pl022: only enable RX interrupts when TX is complete

MAINTAINERS

@@ -2912,6 +2912,7 @@ F:	include/linux/gigaset_dev.h
 
 GPIO SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
+M:	Linus Walleij <linus.walleij@stericsson.com>
 S:	Maintained
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 F:	Documentation/gpio.txt

arch/arm/boot/dts/testcases/tests-phandle.dtsi

@@ -0,0 +1,37 @@
+
+/ {
+	testcase-data {
+		phandle-tests {
+			provider0: provider0 {
+				#phandle-cells = <0>;
+			};
+
+			provider1: provider1 {
+				#phandle-cells = <1>;
+			};
+
+			provider2: provider2 {
+				#phandle-cells = <2>;
+			};
+
+			provider3: provider3 {
+				#phandle-cells = <3>;
+			};
+
+			consumer-a {
+				phandle-list =	<&provider1 1>,
+						<&provider2 2 0>,
+						<0>,
+						<&provider3 4 4 3>,
+						<&provider2 5 100>,
+						<&provider0>,
+						<&provider1 7>;
+				phandle-list-names = "first", "second", "third";
+
+				phandle-list-bad-phandle = <12345678 0 0>;
+				phandle-list-bad-args = <&provider2 1 0>,
+							<&provider3 0>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/testcases/tests.dtsi

@@ -0,0 +1 @@
+/include/ "tests-phandle.dtsi"

arch/arm/boot/dts/versatile-pb.dts

@@ -46,3 +46,5 @@
 		};
 	};
 };
+
+/include/ "testcases/tests.dtsi"

arch/microblaze/kernel/reset.c

@@ -19,50 +19,11 @@
 static int handle; /* reset pin handle */
 static unsigned int reset_val;
 
-static int of_reset_gpio_handle(void)
-{
-	int ret; /* variable which stored handle reset gpio pin */
-	struct device_node *root; /* root node */
-	struct device_node *gpio; /* gpio node */
-	struct gpio_chip *gc;
-	u32 flags;
-	const void *gpio_spec;
-
-	/* find out root node */
-	root = of_find_node_by_path("/");
-
-	/* give me handle for gpio node to be possible allocate pin */
-	ret = of_parse_phandles_with_args(root, "hard-reset-gpios",
-				"#gpio-cells", 0, &gpio, &gpio_spec);
-	if (ret) {
-		pr_debug("%s: can't parse gpios property\n", __func__);
-		goto err0;
-	}
-
-	gc = of_node_to_gpiochip(gpio);
-	if (!gc) {
-		pr_debug("%s: gpio controller %s isn't registered\n",
-			 root->full_name, gpio->full_name);
-		ret = -ENODEV;
-		goto err1;
-	}
-
-	ret = gc->of_xlate(gc, root, gpio_spec, &flags);
-	if (ret < 0)
-		goto err1;
-
-	ret += gc->base;
-err1:
-	of_node_put(gpio);
-err0:
-	pr_debug("%s exited with status %d\n", __func__, ret);
-	return ret;
-}
-
 void of_platform_reset_gpio_probe(void)
 {
 	int ret;
-	handle = of_reset_gpio_handle();
+	handle = of_get_named_gpio(of_find_node_by_path("/"),
+				   "hard-reset-gpios", 0);
 
 	if (!gpio_is_valid(handle)) {
 		printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",

arch/powerpc/sysdev/qe_lib/gpio.c

@@ -139,14 +139,10 @@ struct qe_pin {
 struct qe_pin *qe_pin_request(struct device_node *np, int index)
 {
 	struct qe_pin *qe_pin;
-	struct device_node *gpio_np;
 	struct gpio_chip *gc;
 	struct of_mm_gpio_chip *mm_gc;
 	struct qe_gpio_chip *qe_gc;
 	int err;
-	int size;
-	const void *gpio_spec;
-	const u32 *gpio_cells;
 	unsigned long flags;
 
 	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
@@ -155,45 +151,25 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
-					  &gpio_np, &gpio_spec);
-	if (err) {
-		pr_debug("%s: can't parse gpios property\n", __func__);
+	err = of_get_gpio(np, index);
+	if (err < 0)
+		goto err0;
+	gc = gpio_to_chip(err);
+	if (WARN_ON(!gc))
 		goto err0;
-	}
 
-	if (!of_device_is_compatible(gpio_np, "fsl,mpc8323-qe-pario-bank")) {
+	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
 		err = -EINVAL;
-		goto err1;
-	}
-
-	gc = of_node_to_gpiochip(gpio_np);
-	if (!gc) {
-		pr_debug("%s: gpio controller %s isn't registered\n",
-			 np->full_name, gpio_np->full_name);
-		err = -ENODEV;
-		goto err1;
-	}
-
-	gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size);
-	if (!gpio_cells || size != sizeof(*gpio_cells) ||
-			*gpio_cells != gc->of_gpio_n_cells) {
-		pr_debug("%s: wrong #gpio-cells for %s\n",
-			 np->full_name, gpio_np->full_name);
-		err = -EINVAL;
-		goto err1;
+		goto err0;
 	}
 
-	err = gc->of_xlate(gc, np, gpio_spec, NULL);
-	if (err < 0)
-		goto err1;
-
 	mm_gc = to_of_mm_gpio_chip(gc);
 	qe_gc = to_qe_gpio_chip(mm_gc);
 
 	spin_lock_irqsave(&qe_gc->lock, flags);
 
+	err -= gc->base;
 	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
 		qe_pin->controller = qe_gc;
 		qe_pin->num = err;
@@ -206,8 +182,6 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 
 	if (!err)
 		return qe_pin;
-err1:
-	of_node_put(gpio_np);
 err0:
 	kfree(qe_pin);
 	pr_debug("%s failed with status %d\n", __func__, err);

drivers/gpio/Kconfig

@@ -387,19 +387,20 @@ config GPIO_LANGWELL
 	  Say Y here to support Intel Langwell/Penwell GPIO.
 
 config GPIO_PCH
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
+	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
 	depends on PCI && X86
 	select GENERIC_IRQ_CHIP
 	help
 	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  This driver can access PCH GPIO device.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7223.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7223 and ML7831.
 	  ML7223 IOH is for MP(Media Phone) use.
-	  ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7223 is completely compatible for Intel EG20T PCH.
+	  ML7831 IOH is for general purpose use.
+	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"

drivers/gpio/gpio-adp5520.c

@@ -193,17 +193,7 @@ static struct platform_driver adp5520_gpio_driver = {
 	.remove		= __devexit_p(adp5520_gpio_remove),
 };
 
-static int __init adp5520_gpio_init(void)
-{
-	return platform_driver_register(&adp5520_gpio_driver);
-}
-module_init(adp5520_gpio_init);
-
-static void __exit adp5520_gpio_exit(void)
-{
-	platform_driver_unregister(&adp5520_gpio_driver);
-}
-module_exit(adp5520_gpio_exit);
+module_platform_driver(adp5520_gpio_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("GPIO ADP5520 Driver");

drivers/gpio/gpio-adp5588.c

@@ -418,9 +418,8 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
 	if (ret)
 		goto err_irq;
 
-	dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n",
-			gc->base, gc->base + gc->ngpio - 1,
-			pdata->irq_base, client->name, revid);
+	dev_info(&client->dev, "IRQ Base: %d Rev.: %d\n",
+			pdata->irq_base, revid);
 
 	if (pdata->setup) {
 		ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);

drivers/gpio/gpio-bt8xx.c

@@ -223,9 +223,6 @@ static int bt8xxgpio_probe(struct pci_dev *dev,
 		goto err_release_mem;
 	}
 
-	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
-	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
-
 	return 0;
 
 err_release_mem:

drivers/gpio/gpio-cs5535.c

@@ -347,7 +347,6 @@ static int __devinit cs5535_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto release_region;
 
-	dev_info(&pdev->dev, "GPIO support successfully loaded.\n");
 	return 0;
 
 release_region:
@@ -382,18 +381,7 @@ static struct platform_driver cs5535_gpio_driver = {
 	.remove = __devexit_p(cs5535_gpio_remove),
 };
 
-static int __init cs5535_gpio_init(void)
-{
-	return platform_driver_register(&cs5535_gpio_driver);
-}
-
-static void __exit cs5535_gpio_exit(void)
-{
-	platform_driver_unregister(&cs5535_gpio_driver);
-}
-
-module_init(cs5535_gpio_init);
-module_exit(cs5535_gpio_exit);
+module_platform_driver(cs5535_gpio_driver);
 
 MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");

drivers/gpio/gpio-da9052.c

@@ -254,17 +254,7 @@ static struct platform_driver da9052_gpio_driver = {
 	},
 };
 
-static int __init da9052_gpio_init(void)
-{
-	return platform_driver_register(&da9052_gpio_driver);
-}
-module_init(da9052_gpio_init);
-
-static void __exit da9052_gpio_exit(void)
-{
-	return platform_driver_unregister(&da9052_gpio_driver);
-}
-module_exit(da9052_gpio_exit);
+module_platform_driver(da9052_gpio_driver);
 
 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
 MODULE_DESCRIPTION("DA9052 GPIO Device Driver");

drivers/gpio/gpio-generic.c

@@ -524,17 +524,7 @@ static struct platform_driver bgpio_driver = {
 	.remove = __devexit_p(bgpio_pdev_remove),
 };
 
-static int __init bgpio_platform_init(void)
-{
-	return platform_driver_register(&bgpio_driver);
-}
-module_init(bgpio_platform_init);
-
-static void __exit bgpio_platform_exit(void)
-{
-	platform_driver_unregister(&bgpio_driver);
-}
-module_exit(bgpio_platform_exit);
+module_platform_driver(bgpio_driver);
 
 #endif /* CONFIG_GPIO_GENERIC_PLATFORM */
 

drivers/gpio/gpio-janz-ttl.c

@@ -201,8 +201,6 @@ static int __devinit ttl_probe(struct platform_device *pdev)
 		goto out_iounmap_regs;
 	}
 
-	dev_info(&pdev->dev, "module %d: registered GPIO device\n",
-			     pdata->modno);
 	return 0;
 
 out_iounmap_regs:
@@ -239,20 +237,9 @@ static struct platform_driver ttl_driver = {
 	.remove		= __devexit_p(ttl_remove),
 };
 
-static int __init ttl_init(void)
-{
-	return platform_driver_register(&ttl_driver);
-}
-
-static void __exit ttl_exit(void)
-{
-	platform_driver_unregister(&ttl_driver);
-}
+module_platform_driver(ttl_driver);
 
 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
 MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:janz-ttl");
-
-module_init(ttl_init);
-module_exit(ttl_exit);

drivers/gpio/gpio-nomadik.c

@@ -1150,8 +1150,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	nmk_gpio_init_irq(nmk_chip);
 
-	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
-		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	dev_info(&dev->dev, "at address %p\n",
+		 nmk_chip->addr);
 	return 0;
 
 out_free:

drivers/gpio/gpio-pcf857x.c

@@ -290,10 +290,7 @@ static int pcf857x_probe(struct i2c_client *client,
 	 * methods can't be called from sleeping contexts.
 	 */
 
-	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-			gpio->chip.base,
-			gpio->chip.base + gpio->chip.ngpio - 1,
-			client->name,
+	dev_info(&client->dev, "%s\n",
 			client->irq ? " (irq ignored)" : "");
 
 	/* Let platform code set up the GPIOs and their users.

drivers/gpio/gpio-pch.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -49,8 +49,8 @@ struct pch_regs {
 
 enum pch_type_t {
 	INTEL_EG20T_PCH,
-	OKISEMI_ML7223m_IOH, /* OKISEMI ML7223 IOH PCIe Bus-m */
-	OKISEMI_ML7223n_IOH  /* OKISEMI ML7223 IOH PCIe Bus-n */
+	OKISEMI_ML7223m_IOH, /* LAPIS Semiconductor ML7223 IOH PCIe Bus-m */
+	OKISEMI_ML7223n_IOH  /* LAPIS Semiconductor ML7223 IOH PCIe Bus-n */
 };
 
 /* Specifies number of GPIO PINS */
@@ -524,6 +524,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8803) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);