can't turn off ethernet leds in bookworm on Pi5

[acavalin]

Describe the bug
Turning off ethernet leds via /boot/firmware/config.txt with the latest brand new installed Pi OS 64-bit works on a Pi4 but not on Pi5.

To reproduce
Add these lines in /boot/firmware/config.txt right after the line arm_boost=1:

dtparam=eth_led0=4
dtparam=eth_led1=4

Expected behaviour: Ethernet leds are both off.

Actual behaviour: Ethernet leds are on (act blinking).

System

• Raspberry Pi 5 Model B Rev 1.0, 8GB RAM
• Which OS and version (cat /etc/rpi-issue)?

  Raspberry Pi reference 2023-10-10
  Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 962bf483c8f326405794827cce8c0313fd5880a8, stage2
  

• Which firmware version (vcgencmd version)?

  2023/12/14 16:43:25 
  Copyright (c) 2012 Broadcom
  version 0f881224 (release) (embedded)
  

• Which kernel version (uname -a)?

  Linux raoul 6.1.66-v8-16k+ raspberrypi/firmware#1 SMP PREEMPT Wed Dec 13 15:18:43 UTC 2023 aarch64 GNU/Linux
  

Logs

`dmesg` log

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[    0.000000] Linux version 6.1.66-v8-16k+ (runner@fv-az1429-763) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) raspberrypi/firmware#1 SMP PREEMPT Wed Dec 13 15:18:43 UTC 2023
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001a000000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x000000003f7fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376
[    0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 521728
[    0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:9F:9D:F1 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=a0c4eab0-02 rootfstype=ext4 fsck.repair=yes rootwait ipv6.disable=1 panic=5 consoleblank=0 plymouth.enable=0 dwc_otg.lpm_enable=0 usbhid.quirks=0x0463:0xffff:0x08 printk.time=1 net.ifnames=0
[    0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[    0.000000] Memory: 7898640K/8380416K available (12352K kernel code, 2186K rwdata, 4096K rodata, 4480K init, 1216K bss, 154096K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 40115 entries in 40 pages
[    0.000000] ftrace: allocated 40 pages with 2 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:   RCU event tracing is enabled.
[    0.000000] rcu:   RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000149] Console: colour dummy device 80x25
[    0.000308] printk: console [tty1] enabled
[    0.000329] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000341] pid_max: default: 32768 minimum: 301
[    0.000367] LSM: Security Framework initializing
[    0.000432] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[    0.000459] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[    0.000881] cgroup: Disabling memory control group subsystem
[    0.001374] cblist_init_generic: Setting adjustable number of callback queues.
[    0.001384] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.001428] cblist_init_generic: Setting adjustable number of callback queues.
[    0.001434] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.001470] cblist_init_generic: Setting adjustable number of callback queues.
[    0.001476] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.001560] rcu: Hierarchical SRCU implementation.
[    0.001565] rcu:   Max phase no-delay instances is 1000.
[    0.002167] EFI services will not be available.
[    0.002286] smp: Bringing up secondary CPUs ...
[    0.002523] Detected PIPT I-cache on CPU1
[    0.002571] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[    0.002823] Detected PIPT I-cache on CPU2
[    0.002861] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[    0.003112] Detected PIPT I-cache on CPU3
[    0.003146] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[    0.003183] smp: Brought up 1 node, 4 CPUs
[    0.003203] SMP: Total of 4 processors activated.
[    0.003208] CPU features: detected: 32-bit EL0 Support
[    0.003213] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.003219] CPU features: detected: Common not Private translations
[    0.003224] CPU features: detected: CRC32 instructions
[    0.003230] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.003234] CPU features: detected: LSE atomic instructions
[    0.003239] CPU features: detected: Privileged Access Never
[    0.003244] CPU features: detected: RAS Extension Support
[    0.003249] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.003290] CPU: All CPU(s) started at EL2
[    0.003294] alternatives: applying system-wide alternatives
[    0.005180] devtmpfs: initialized
[    0.007808] Enabled cp15_barrier support
[    0.007819] Enabled setend support
[    0.007884] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.007897] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[    0.008818] pinctrl core: initialized pinctrl subsystem
[    0.009055] DMI not present or invalid.
[    0.009253] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.010546] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.010602] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.010684] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.010712] audit: initializing netlink subsys (disabled)
[    0.010781] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[    0.010925] thermal_sys: Registered thermal governor 'step_wise'
[    0.010943] cpuidle: using governor menu
[    0.011035] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.011082] ASID allocator initialised with 32768 entries
[    0.011373] Serial: AMBA PL011 UART driver
[    0.013153] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[    0.013867] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[    0.743697] printk: console [ttyAMA10] enabled
[    0.756170] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-12-14T16:43:25, variant start_cd
[    0.770230] raspberrypi-firmware soc:firmware: Firmware hash is 0f88122400000000000000000000000000000000
[    0.788204] KASLR enabled
[    0.800161] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[    0.808341] iommu: Default domain type: Translated 
[    0.813243] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.819632] SCSI subsystem initialized
[    0.823440] usbcore: registered new interface driver usbfs
[    0.828956] usbcore: registered new interface driver hub
[    0.834297] usbcore: registered new device driver usb
[    0.839470] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.846634] pps_core: LinuxPPS API ver. 1 registered
[    0.851617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.860797] PTP clock support registered
[    0.864968] vgaarb: loaded
[    0.867824] clocksource: Switched to clocksource arch_sys_counter
[    0.874078] VFS: Disk quotas dquot_6.6.0
[    0.878031] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[    0.885145] FS-Cache: Loaded
[    0.888064] CacheFiles: Loaded
[    0.892832] NET: Registered PF_INET protocol family
[    0.897893] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[    0.907910] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear)
[    0.916522] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
[    0.924305] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear)
[    0.932523] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
[    0.941688] TCP: Hash tables configured (established 65536 bind 65536)
[    0.948393] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear)
[    0.956029] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
[    0.962943] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear)
[    0.970351] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.976181] RPC: Registered named UNIX socket transport module.
[    0.982129] RPC: Registered udp transport module.
[    0.986851] RPC: Registered tcp transport module.
[    0.991572] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.998041] PCI: CLS 0 bytes, default 64
[    1.002089] Trying to unpack rootfs image as initramfs...
[    1.012339] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[    1.020769] kvm [1]: IPA Size Limit: 40 bits
[    1.025072] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[    1.033942] kvm [1]: vgic interrupt IRQ9
[    1.037944] kvm [1]: VHE mode initialized successfully
[    1.096872] Initialise system trusted keyrings
[    1.101457] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    1.109842] zbud: loaded
[    1.112967] NFS: Registering the id_resolver key type
[    1.118061] Key type id_resolver registered
[    1.122267] Key type id_legacy registered
[    1.126355] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.133096] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.140609] F2FS not supported on PAGE_SIZE(16384) != 4096
[    1.146218] Key type asymmetric registered
[    1.150335] Asymmetric key parser 'x509' registered
[    1.155269] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.162819] io scheduler mq-deadline registered
[    1.167384] io scheduler kyber registered
[    1.172233] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31)
[    1.181509] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32)
[    1.189339] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33)
[    1.197153] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34)
[    1.205170] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35)
[    1.209412] Freeing initrd memory: 12128K
[    1.214430] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36)
[    1.227780] gpio-461 (RP1 RUN pin): hogged as output/high
[    1.233958] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[    1.242616] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[    1.253613] Console: switching to colour frame buffer device 240x67
[    1.261431] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[    1.301993] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.308876] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A
[    1.318196] serial serial0: tty port ttyS0 registered
[    1.323875] iproc-rng200 107d208000.rng: hwrng registered
[    1.329440] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[    1.338479] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[    1.347555] brd: module loaded
[    1.352125] loop: module loaded
[    1.355490] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.362949] Loading iSCSI transport class v2.0-870.
[    1.368929] usbcore: registered new interface driver r8152
[    1.374459] usbcore: registered new interface driver lan78xx
[    1.380163] usbcore: registered new interface driver smsc95xx
[    1.386074] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.391926] dwc_otg: FIQ enabled
[    1.391929] dwc_otg: NAK holdoff enabled
[    1.391931] dwc_otg: FIQ split-transaction FSM enabled
[    1.391936] Module dwc_common_port init
[    1.392204] usbcore: registered new interface driver uas
[    1.397556] usbcore: registered new interface driver usb-storage
[    1.403788] mousedev: PS/2 mouse device common for all mice
[    1.417239] rpi-rtc soc:rpi_rtc: registered as rtc0
[    1.423606] rpi-rtc soc:rpi_rtc: setting system clock to 2024-01-03T11:25:48 UTC (1704281148)
[    1.432859] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[    1.439427] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.448434] sdhci: Secure Digital Host Controller Interface driver
[    1.454653] sdhci: Copyright(c) Pierre Ossman
[    1.459196] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.465306] ledtrig-cpu: registered to indicate activity on CPUs
[    1.471384] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.477869] hid: raw HID events driver (C) Jiri Kosina
[    1.483061] usbcore: registered new interface driver usbhid
[    1.488662] usbhid: USB HID core driver
[    1.492705] NET: Registered PF_PACKET protocol family
[    1.497809] Key type dns_resolver registered
[    1.502358] registered taskstats version 1
[    1.506497] Loading compiled-in X.509 certificates
[    1.511494] Key type .fscrypt registered
[    1.515441] Key type fscrypt-provisioning registered
[    1.522366] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[    1.529849] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@120000, using [bus 00-ff]
[    1.539428] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[    1.548206] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[    1.556986] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[    1.565751] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    1.575696] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[    1.584466] brcm-pcie 1000120000.pcie: Forcing gen 2
[    1.589945] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00
[    1.596858] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.602808] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[    1.613826] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[    1.625467] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[    1.631997] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.638886] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.751830] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[    1.758935] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000
[    1.765424] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[    1.772161] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[    1.778892] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[    1.785698] pci 0000:01:00.0: supports D1
[    1.790141] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.807840] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.814911] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[    1.822497] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[    1.830079] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[    1.837656] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[    1.845227] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.850609] pci 0000:00:00.0:   bridge window [mem 0x1f00000000-0x1f005fffff]
[    1.858173] pci 0000:00:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
[    1.867053] pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
[    1.876044] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    1.882602] pcieport 0000:00:00.0: PME: Signaling with IRQ 39
[    1.888844] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[    1.894986] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[    1.904467] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[    1.914128] rp1 0000:01:00.0: enabling device (0000 -> 0002)
[    1.921355] rp1 0000:01:00.0: chip_id 0x20001927
[    1.952455] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:9f:9d:f1)
[    1.963969] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[    2.031941] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    2.037431] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[    2.045557] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[    2.054987] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000
[    2.061254] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    2.066738] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[    2.074418] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[    2.081021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    2.089755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.097422] usb usb1: Product: xHCI Host Controller
[    2.102731] usb usb1: Manufacturer: Linux 6.1.66-v8-16k+ xhci-hcd
[    2.109262] usb usb1: SerialNumber: xhci-hcd.0
[    2.114276] hub 1-0:1.0: USB hub found
[    2.118466] hub 1-0:1.0: 2 ports detected
[    2.123108] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    2.131825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.139488] usb usb2: Product: xHCI Host Controller
[    2.144874] usb usb2: Manufacturer: Linux 6.1.66-v8-16k+ xhci-hcd
[    2.151406] usb usb2: SerialNumber: xhci-hcd.0
[    2.156393] hub 2-0:1.0: USB hub found
[    2.160579] hub 2-0:1.0: 1 port detected
[    2.223933] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    2.229418] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[    2.237537] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[    2.246958] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000
[    2.253296] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    2.258807] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[    2.266495] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[    2.273161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    2.281892] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.289568] usb usb3: Product: xHCI Host Controller
[    2.294884] usb usb3: Manufacturer: Linux 6.1.66-v8-16k+ xhci-hcd
[    2.301420] usb usb3: SerialNumber: xhci-hcd.1
[    2.306411] hub 3-0:1.0: USB hub found
[    2.310598] hub 3-0:1.0: 2 ports detected
[    2.315228] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    2.323982] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.331644] usb usb4: Product: xHCI Host Controller
[    2.336999] usb usb4: Manufacturer: Linux 6.1.66-v8-16k+ xhci-hcd
[    2.343525] usb usb4: SerialNumber: xhci-hcd.1
[    2.348513] hub 4-0:1.0: USB hub found
[    2.352702] hub 4-0:1.0: 1 port detected
[    2.358029] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    2.366909] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    2.375369] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    2.383846] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.390834] platform 1000800000.codec: Adding to iommu group 0
[    2.397179] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    2.405825] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    2.414468] platform 1000880000.pisp_be: Adding to iommu group 0
[    2.420974] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    2.429264] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    2.437738] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[    2.445552] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    2.454386] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[    2.462074] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[    2.469756] platform axi:gpu: Adding to iommu group 1
[    2.475305] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[    2.482809] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[    2.490460] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    2.499302] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[    2.506632] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default
[    2.515118] mmc0: CQHCI version 5.10
[    2.515351] mmc1: CQHCI version 5.10
[    2.516749] of_cfs_init
[    2.526069] of_cfs_init: OK
[    2.538752] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.64
[    2.547383] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.551423] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[    2.554956] usb 1-1: Product: USB2.0 Hub             
[    2.554960] usb 1-1: Manufacturer: VIA Labs, Inc.         
[    2.574802] usb 3-2: new high-speed USB device number 2 using xhci-hcd
[    2.625141] hub 1-1:1.0: USB hub found
[    2.629484] hub 1-1:1.0: 4 ports detected
[    2.649478] mmc0: new ultra high speed SDR104 SDXC card at address 5048
[    2.656837] mmcblk0: mmc0:5048 SN64G 59.5 GiB 
[    2.664071]  mmcblk0: p1 p2 p3
[    2.667667] mmcblk0: mmc0:5048 SN64G 59.5 GiB (quirks 0x00004000)
[    2.689059] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    2.710370] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[    2.721634] Freeing unused kernel memory: 4480K
[    2.726674] Run /init as init process
[    2.730768]   with arguments:
[    2.730770]     /init
[    2.730773]   with environment:
[    2.730775]     HOME=/
[    2.730777]     TERM=linux
[    2.732169] usb 3-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    2.740932] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.740937] usb 3-2: Product: USB 2.0 Hub
[    2.751501] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[    2.785275] hub 3-2:1.0: USB hub found
[    2.789537] hub 3-2:1.0: 4 ports detected
[    2.863923] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    2.889037] usb 4-1: New USB device found, idVendor=1058, idProduct=2621, bcdDevice=10.26
[    2.897723] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.905330] usb 4-1: Product: Elements 2621
[    2.910133] usb 4-1: Manufacturer: Western Digital
[    2.916621] usb 4-1: SerialNumber: 575838324539303033304644
[    2.925360] usb-storage 4-1:1.0: USB Mass Storage device detected
[    2.934215] scsi host0: usb-storage 4-1:1.0
[    3.140796] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.64
[    3.149501] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.157129] usb 2-1: Product: USB3.0 Hub             
[    3.162772] usb 2-1: Manufacturer: VIA Labs, Inc.         
[    3.227835] usb 3-2.3: new full-speed USB device number 3 using xhci-hcd
[    3.235445] hub 2-1:1.0: USB hub found
[    3.239809] hub 2-1:1.0: 4 ports detected
[    3.263841] usb 1-2: new full-speed USB device number 3 using xhci-hcd
[    3.421005] usb 1-2: New USB device found, idVendor=08bb, idProduct=27c4, bcdDevice= 1.00
[    3.429692] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.437299] usb 1-2: Product: USB AUDIO    DAC
[    3.442196] usb 1-2: Manufacturer: BurrBrown from Texas Instruments
[    3.473115] hid-generic 0003:08BB:27C4.0001: hidraw0: USB HID v1.00 Device [BurrBrown from Texas Instruments USB AUDIO    DAC] on usb-xhci-hcd.0-2/input2
[    3.547848] usb 1-1.2: new high-speed USB device number 4 using xhci-hcd
[    3.715334] usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=00d3, bcdDevice= 1.00
[    3.724193] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.731995] usb 1-1.2: Product: RTL2838UHIDIR
[    3.736827] usb 1-1.2: Manufacturer: Realtek
[    3.741567] usb 1-1.2: SerialNumber: 00000001
[    3.823889] usb 2-1.3: new SuperSpeed USB device number 3 using xhci-hcd
[    3.849029] usb 2-1.3: New USB device found, idVendor=1058, idProduct=2621, bcdDevice=10.26
[    3.857885] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.865687] usb 2-1.3: Product: Elements 2621
[    3.870539] usb 2-1.3: Manufacturer: Western Digital
[    3.875982] usb 2-1.3: SerialNumber: 5758373245393041535A4343
[    3.900171] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    3.907287] scsi host1: usb-storage 2-1.3:1.0
[    3.964308] scsi 0:0:0:0: Direct-Access     WD       Elements 2621    1026 PQ: 0 ANSI: 6
[    3.975024] sd 0:0:0:0: [sda] Spinning up disk...
[    3.975839] usb 1-1.4: new high-speed USB device number 5 using xhci-hcd
[    4.081449] usb 3-2.3: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01
[    4.090316] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.098128] usb 3-2.3: Product: 5E
[    4.102005] usb 3-2.3: Manufacturer: EATON
[    4.138523] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.23
[    4.147393] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.155205] usb 1-1.4: Product: USB2.0 Hub             
[    4.160935] usb 1-1.4: Manufacturer: VIA Labs, Inc.         
[    4.225338] hub 1-1.4:1.0: USB hub found
[    4.229855] hub 1-1.4:1.0: 4 ports detected
[    4.234531] usb 2-1.4: new SuperSpeed USB device number 4 using xhci-hcd
[    4.262592] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.23
[    4.271455] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.279261] usb 2-1.4: Product: USB3.0 Hub             
[    4.284966] usb 2-1.4: Manufacturer: VIA Labs, Inc.         
[    4.397114] hub 2-1.4:1.0: USB hub found
[    4.426605] hub 2-1.4:1.0: 4 ports detected
[    4.924290] scsi 1:0:0:0: Direct-Access     WD       Elements 2621    1026 PQ: 0 ANSI: 6
[    4.933544] sd 1:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.942162] sd 1:0:0:0: [sdb] Write Protect is off
[    4.947427] sd 1:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    4.947817] sd 1:0:0:0: [sdb] No Caching mode page found
[    4.953603] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[    4.987831] .ready
[    4.990566] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.999166] sd 0:0:0:0: [sda] Write Protect is off
[    5.004425] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[    5.004792] sd 0:0:0:0: [sda] No Caching mode page found
[    5.010570] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.043432]  sda: sda1 sda2 sda3
[    5.047263] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.145457] hid-generic 0003:0463:FFFF.0002: hiddev96,hidraw1: USB HID v1.10 Device [EATON 5E] on usb-xhci-hcd.1-2.3/input0
[    6.335829] usb 3-2.4: new high-speed USB device number 4 using xhci-hcd
[    6.540046] usb 3-2.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.548898] usb 3-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.556695] usb 3-2.4: Product: USB 2.0 Hub
[    6.625396] hub 3-2.4:1.0: USB hub found
[    6.629832] hub 3-2.4:1.0: 4 ports detected
[    7.019839] usb 3-2.4.2: new high-speed USB device number 5 using xhci-hcd
[    7.225108] usb 3-2.4.2: New USB device found, idVendor=04a9, idProduct=190f, bcdDevice= 7.04
[    7.234133] usb 3-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.242105] usb 3-2.4.2: Product: CanoScan
[    7.246659] usb 3-2.4.2: Manufacturer: Canon
[    7.495832] usb 3-2.4.3: new full-speed USB device number 6 using xhci-hcd
[    7.721622] usb 3-2.4.3: New USB device found, idVendor=5842, idProduct=4e61, bcdDevice= 0.01
[    7.730626] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.738576] usb 3-2.4.3: Product: NATURE
[    7.742946] usb 3-2.4.3: Manufacturer: X-BOWS
[    7.842143] input: X-BOWS NATURE as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.0/0003:5842:4E61.0003/input/input0
[    7.916015] hid-generic 0003:5842:4E61.0003: input,hidraw2: USB HID v1.11 Keyboard [X-BOWS NATURE] on usb-xhci-hcd.1-2.4.3/input0
[    7.937464] input: X-BOWS NATURE Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.1/0003:5842:4E61.0004/input/input1
[    7.953575] input: X-BOWS NATURE System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.1/0003:5842:4E61.0004/input/input2
[    8.027900] input: X-BOWS NATURE Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.1/0003:5842:4E61.0004/input/input3
[    8.044958] input: X-BOWS NATURE Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.1/0003:5842:4E61.0004/input/input4
[    8.061533] hid-generic 0003:5842:4E61.0004: input,hidraw3: USB HID v1.11 Mouse [X-BOWS NATURE] on usb-xhci-hcd.1-2.4.3/input1
[    8.283831] usb 3-2.4.4: new low-speed USB device number 7 using xhci-hcd
[    8.516487] usb 3-2.4.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[    8.525566] usb 3-2.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    8.533590] usb 3-2.4.4: Product: USB Optical Mouse
[    8.609444] input: USB Optical Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/0003:1BCF:0005.0005/input/input5
[    8.625450] hid-generic 0003:1BCF:0005.0005: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-xhci-hcd.1-2.4.4/input0
[    8.703126]  sdb: sdb1 sdb2 sdb3
[    8.707096] sd 1:0:0:0: [sdb] Attached SCSI disk
[    9.243277] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[   10.151451] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   10.185513] systemd[1]: Detected architecture arm64.
[   10.201099] systemd[1]: Hostname set to <raoul>.
[   10.285958] uart-pl011 107d001000.serial: no DMA platform data
[   10.620911] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[   10.630541] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[   10.787646] systemd[1]: Queued start job for default target graphical.target.
[   10.812704] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[   10.821830] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   10.831340] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver.
[   10.841470] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[   10.851943] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Cryptsetup Units Slice.
[   10.862561] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   10.872893] systemd[1]: Created slice user.slice - User and Session Slice.
[   10.881236] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[   10.893763] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[   10.905855] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   10.919952] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[   10.930379] systemd[1]: Reached target slices.target - Slice Units.
[   10.938107] systemd[1]: Reached target swap.target - Swaps.
[   10.945138] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   10.977063] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[   10.989478] systemd[1]: Listening on syslog.socket - Syslog Socket.
[   10.997350] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[   11.007525] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   11.018015] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[   11.027854] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   11.038324] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   11.050934] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   11.060621] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   11.070161] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[   11.099948] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   11.110351] systemd[1]: Mounting proc-fs-nfsd.mount - NFSD configuration filesystem...
[   11.120948] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   11.131926] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   11.141954] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[   11.160456] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[   11.172540] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[   11.184394] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   11.197016] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   11.208803] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   11.219918] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[   11.230595] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   11.242555] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   11.253288] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[   11.262929] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   11.282339] systemd[1]: Starting systemd-journald.service - Journal Service...
[   11.291052] fuse: init (API version 7.37)
[   11.292275] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   11.310851] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   11.322707] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   11.335627] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   11.349166] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   11.358378] i2c_dev: i2c /dev entries driver
[   11.364869] systemd[1]: Mounted proc-fs-nfsd.mount - NFSD configuration filesystem.
[   11.374237] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   11.382944] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[   11.391140] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   11.400820] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[   11.410797] systemd[1]: Started systemd-journald.service - Journal Service.
[   11.485496] systemd-journald[367]: Received client request to flush runtime journal.
[   12.084714] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[   12.084806] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[   12.084896] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[   12.084939] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[   12.085013] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[   12.085053] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[   12.085129] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[   12.085165] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[   12.085405] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[   12.085442] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[   12.131389] input: pwr_button as /devices/platform/pwr_button/input/input6
[   12.132003] mc: Linux media interface: v0.10
[   12.180577] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[   12.187789] brcmstb-i2c 107d508200.i2c:  @200000hz registered in interrupt mode
[   12.191913] brcmstb-i2c 107d508280.i2c:  @200000hz registered in interrupt mode
[   12.199482] videodev: Linux video capture interface: v2.00
[   12.371011] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[   12.371176] pispbe 1000880000.pisp_be: pispbe_probe: HW version:  0x02252700
[   12.371181] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[   12.371194] pispbe 1000880000.pisp_be: pispbe_probe: Status:      0x00000000
[   12.371198] pispbe 1000880000.pisp_be: Register nodes for group 0
[   12.371622] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[   12.371813] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[   12.371939] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[   12.372039] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[   12.374602] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[   12.374752] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[   12.374849] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[   12.374938] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[   12.375027] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[   12.375380] pispbe 1000880000.pisp_be: Register nodes for group 1
[   12.375506] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[   12.375598] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[   12.375684] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[   12.375770] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[   12.375873] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[   12.375984] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[   12.376077] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[   12.376167] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[   12.376263] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[   12.433609] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[   12.434708] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[   12.439999] rpivid 1000800000.codec: Device registered as /dev/video19
[   12.594595] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.596691] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   12.608664] Bluetooth: Core ver 2.22
[   12.608704] NET: Registered PF_BLUETOOTH protocol family
[   12.608708] Bluetooth: HCI device and connection manager initialized
[   12.608717] Bluetooth: HCI socket layer initialized
[   12.608721] Bluetooth: L2CAP socket layer initialized
[   12.608728] Bluetooth: SCO socket layer initialized
[   12.676135] Bluetooth: HCI UART driver ver 2.3
[   12.676147] Bluetooth: HCI UART protocol H4 registered
[   12.676190] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   12.676410] Bluetooth: HCI UART protocol Broadcom registered
[   12.676509] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[   12.676597] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[   12.931558] usb 1-1.2: dvb_usb_v2: found a 'TerraTec Cinergy T Stick RC (Rev. 3)' in warm state
[   12.982514] usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   12.982550] dvbdev: DVB: registering new adapter (TerraTec Cinergy T Stick RC (Rev. 3))
[   12.982557] usb 1-1.2: media controller created
[   12.983103] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   13.021213] usbcore: registered new interface driver snd-usb-audio
[   13.040342] Bluetooth: hci0: BCM: chip id 107
[   13.040588] Bluetooth: hci0: BCM: features 0x2f
[   13.041772] Bluetooth: hci0: BCM4345C0
[   13.041779] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[   13.097642] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[   13.099595] Console: switching to colour dummy device 80x25
[   13.102557] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[   13.104934] Registered IR keymap rc-cec
[   13.104986] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[   13.105043] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input7
[   13.106886] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[   13.109462] Registered IR keymap rc-cec
[   13.109515] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[   13.109566] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input8
[   13.111541] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[   13.111726] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[   13.111855] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[   13.111981] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[   13.112116] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[   13.166844] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[   13.188783] i2c i2c-13: Added multiplexed i2c bus 14
[   13.188793] rtl2832 13-0010: Realtek RTL2832 successfully attached
[   13.188816] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[   13.188831] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
[   13.216689] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[   13.225599] Console: switching to colour frame buffer device 240x67
[   13.233014] e4000 14-0064: Elonics E4000 successfully identified
[   13.243955] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[   13.262089] rtl2832_sdr rtl2832_sdr.3.auto: Registered as swradio0
[   13.262098] rtl2832_sdr rtl2832_sdr.3.auto: Realtek RTL2832 SDR attached
[   13.262102] rtl2832_sdr rtl2832_sdr.3.auto: SDR API is still slightly experimental and functionality changes may follow
[   13.268969] Registered IR keymap rc-empty
[   13.269027] rc rc2: TerraTec Cinergy T Stick RC (Rev. 3) as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.2/rc/rc2
[   13.271056] rc rc2: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
[   13.271107] input: TerraTec Cinergy T Stick RC (Rev. 3) as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.2/rc/rc2/input9
[   13.271376] usb 1-1.2: dvb_usb_v2: schedule remote query interval to 200 msecs
[   13.280246] usb 1-1.2: dvb_usb_v2: 'TerraTec Cinergy T Stick RC (Rev. 3)' successfully initialized and connected
[   13.280350] usbcore: registered new interface driver dvb_usb_rtl28xxu
[   13.877030] block device autoloading is deprecated and will be removed.
[   13.887933] block device autoloading is deprecated and will be removed.
[   13.901190] Bluetooth: hci0: BCM: features 0x2f
[   13.902731] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[   13.902741] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[   13.903067] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[   13.923294] md/raid1:md126: active with 2 out of 2 mirrors
[   13.923307] md/raid1:md127: active with 2 out of 2 mirrors
[   13.923357] md127: detected capacity change from 0 to 12572672
[   13.959645] md126: detected capacity change from 0 to 3879467008
[   17.805958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.805968] Bluetooth: BNEP filters: protocol multicast
[   17.805976] Bluetooth: BNEP socket layer initialized
[   17.807937] Bluetooth: MGMT ver 1.22
[   17.832549] NET: Registered PF_ALG protocol family
[   21.139438] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[   21.139447] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[   21.141782] pps pps0: new PPS source ptp0
[   21.141829] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[   27.848803] Adding 7323632k swap on /dev/mapper/cswap.  Priority:200 extents:1 across:7323632k FS
[   27.875281] Adding 7323632k swap on /dev/mapper/cswap2.  Priority:100 extents:1 across:7323632k FS
[   28.284270] NFSD: Using nfsdcld client tracking operations.
[   28.284277] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
[   35.484881] macb 1f00100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[   36.188838] Bluetooth: RFCOMM TTY layer initialized
[   36.188850] Bluetooth: RFCOMM socket layer initialized
[   36.188859] Bluetooth: RFCOMM ver 1.11
[   91.573275] loop0: detected capacity change from 0 to 3670015744
[   92.110074] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: none.
[   95.212257] nfsd: last server has exited, flushing export cache
[   95.284281] NFSD: Using nfsdcld client tracking operations.
[   95.284288] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)

`/boot/firmware/config.txt`

# DOCUMENTATION
#   http://rptl.io/configtxt
#   https://www.raspberrypi.com/documentation/computers/config_txt.html
#   https://www.raspberrypi.com/documentation/computers/legacy_config_txt.html
#   /boot/firmware/overlays/README
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Automatically load initramfs files, if found
auto_initramfs=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
# number of active displays 1-2
max_framebuffers=1
# 1=create an initial video= setting in cmdline.txt; 0=use kernel's default
disable_fw_kms_setup=1
# disable compensation for displays with overscan (black border)
disable_overscan=1
# adjust overscan (number: negative=expand img, positive=reduce img)
#overscan_<left|right|top|bottom>=x
# the primary/console UART /dev/ttyAMA0
enable_uart=1
# use a 64 bit kernel -- https://github.com/raspberrypi/firmware/issues/1795
arm_64bit=1
# Run as fast as firmware / board allows
arm_boost=1
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# pi5 8GB Ram -- https://www.raspberrypi.com/documentation/computers/config_txt.html#conditional-filters
#   [board-type=0xd04170]  <=  cat /proc/cpuinfo | grep Revision
#   [0xc2cbf178a6cb0e17]   <=  cat /proc/cpuinfo | grep Serial

# disable leds -- https://github.com/raspberrypi/firmware/issues/1742
# Disable the PWR & Activity LEDs
dtparam=pwr_led_trigger=default-on
dtparam=pwr_led_activelow=off
dtparam=act_led_trigger=default-on
dtparam=act_led_activelow=off
# Disable ethernet port LEDs (0=ACT, 1=LNK)
dtparam=eth_led0=4
dtparam=eth_led1=4

# overclocking -- https://www.tomshardware.com/how-to/overclock-raspberry-pi-5
#   start from cpu=3000/gpu=1000 and go down in case of problems
#arm_freq=3000
#gpu_freq=1000

# force cpu governor to performance
#force_turbo=1
[all]
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[pi4]
# force HDMI output mode (instead of composite)
hdmi_force_hotplug=1
# fix video output to the current monitor, after running: tvservice -d /boot/edid.dat
hdmi_edid_file=1
# force a specific HDMI mode (forces VGA): 16:9 1080p, CEA timings, audio through HDMI
hdmi_group=1
hdmi_mode=16
# force HDMI mode rather than DVI. can make audio work in DMT (computer monitor) modes
hdmi_drive=2
# increase signal to HDMI to fix interference/blanking/no-signal (default 5)
config_hdmi_boost=6
  
# force HD disabling 4k modes => prevent 4K memory drain
#   https://retropie.org.uk/forum/topic/24436/drm_ioctl_mode_create_dumb-failed-cannot-allocate-memory/8
#   => So I commented-out gpu_mem=256 and re-added cma=384M to cmdline.txt... Rebooted. Stable again.
#   => CMA = size of kernel global memory area for contiguous memory allocations
hdmi_max_pixel_freq:0=200000000
hdmi_max_pixel_freq:1=200000000

# overclocking
#   https://www.raspberrypi.org/documentation/configuration/config-txt/overclocking.md
#   https://retropie.org.uk/forum/topic/27430/howto-optimized-boot-config-txt
arm_freq=2048
v3d_freq=750
over_voltage=6
hdmi_enable_4kp60=1

# fix eth splitter disconnections by disabling "Energy Efficient Ethernet" support
#   1. https://github.com/raspberrypi/Raspberry-Pi-OS-64bit/issues/178#issuecomment-1386871175
#   2. https://raspberrypi.stackexchange.com/questions/116677/force-wired-ethernet-speed-to-100-full/140550#140550
dtparam=eee=off
dtoverlay=disable-gigabit-ethernet

# Disable the PWR & Activity LEDs
dtparam=pwr_led_trigger=default-on
dtparam=pwr_led_activelow=off
dtparam=act_led_trigger=none
dtparam=act_led_activelow=off
[all]

`/boot/firmware/cmdline.txt`

console=serial0,115200 console=tty1 root=PARTUUID=a0c4eab0-02 rootfstype=ext4 fsck.repair=yes rootwait ipv6.disable=1 panic=5 consoleblank=0 plymouth.enable=0 dwc_otg.lpm_enable=0 usbhid.quirks=0x0463:0xffff:0x08 printk.time=1 net.ifname
s=0

Additional context
I'm currently using the patched kernel in linux#5753 (sudo rpi-update pulls/5788) but the ethernet leds problem were present in the stock firmware too.

[pelwell]

Fixed by #5826.

If you wait about 45 minutes you'll be able to install a trial kernel (although it's really just the Pi 5 dtb and README that has changed) using sudo rpi-update pulls/5826.

[acavalin]

Thank you 😃
If I pull this trial kernel, will it have the #5753 patch included?
Sorry for the off topic question 🙏 : is it possible to know when the #5753 patch will be included in the production kernel?

[pelwell]

If I pull this trial kernel, will it have the #5753 patch included?

Yes.

Sorry for the off topic question 🙏 : is it possible to know when the #5753 patch will be included in the production kernel?

It will be in the next stable release. There's no hard schedule for that, but it's likely to be before the end of February, and possibly sooner.

[acavalin]

I did a sudo rpi-update pulls/5826, rebooted, and it works! Thank you 👍