Quad

Frame

Alien Spider AQ50D PRO 250mm Mini Quadcopter Carbon Fiber

GoodLuckBuy $49.18

Motors

ZMR 1804 2400kv

BangGood £22.52

Flight Controller

Flip 32.

What sort of pins??

gostorego $35 BangGood £18.49

Props

Gemfan 5030

HobbyKing £1.62

ESC

B-12A Ice Blue series SimonK

gostorego $32

Rx

FrSky D4R-II

Only 4 channel PWM, 8 channel CPPM. Don’t I need more?

unmannedtechshop £19.25 BangGood £20.54

Lots of info

How to connect to Naze/Flip32

Battery

Dynamic 1800Mah 3S LiPo

HobbyStores £8.99

Controller

Turnigy 9XR Pro Mode 2

HobbyKing £65.99

Tx module

FrSky DJT Tx module

GiantShark £19.60 T9 £19.79

FrSky Cable

Frsky Telemetry & Head Track Module Extent Cable for 9XR Pro

HobbyKing £2.98

Battery charger

Turnigy Accucel 6 ???

HobbyKing £15.17

Total

$116.18 + £52.38 = £70.34 + £52.38 = £122.72

New soldering iron

Prop balancer

DuBro or TopFlite

Controller battery

Turnigy safety

Inverter

http://aeroquad.com/showthread.php?9064-SBUS-to-v2-1-using-a-Transistor-NOT-Gate or schmitt trigger inverter 74LVC1G14 or https://github.com/openLRSng/openLRSng/wiki/Telemetry-guide

• 3.5mm bullet connectors

• Heat shrink tubing (red and black)

• EC5 or XT60 or something similar battery connectors (ideally xt60)

• Plastic spacers

• buzzer

• 28 WS2812 LEDs.

• foam under baro

• o-rings above and below FC.

• nylon screws for FC

• 2x inline female bullet connectors for power distribution

• bluetooth module for configuration

• 100uf smoothing capacitor on FC.

• RSSI lead from RX to RC2 and using RSSI_ADC feature

• Telemetry lead from RX and using UART2 - still need to fit inverter or write some code to get telemetry working because softserial pins used by LED strip pins.

Good info here and here and on wiring and also. Safety Beginners Guide and here