Update readme.md

readme.md

@@ -1,74 +1,74 @@
-##SD Library for LaunchPad LM4F / TM4C
-
-
-* Adaptation for LaunchPad LM4F / TM4C
-
-Rei Vilo - May 20, 2014
-
-* SD - a slightly more friendly wrapper for sdfatlib
-
-(C) Copyright 2010 SparkFun Electronics
-
+## SD Library for LaunchPad LM4F / TM4C
+
+
+* Adaptation for LaunchPad LM4F / TM4C
+
+Rei Vilo - May 20, 2014
+
+* SD - a slightly more friendly wrapper for sdfatlib
+
+(C) Copyright 2010 SparkFun Electronics
+
 * Arduino SdFat Library
-
+
 Copyright (C) 2009 by William Greiman
-
-----
-
-### Requirements
-
-SD-card in SPI mode requires a 512 bytes buffer for read-write operations. 
-
-Energia 12 
-
-Boards
-
-* LaunchPad Stellaris LM4F120 — *tested*
-* LaunchPad Tiva C Series TM4C123 — *tested*
-* LaunchPad Connected TM4C129 — *not tested*
-
-Other candidates
-
-* LaunchPad MSP430F5529 — *not tested*
-* LaunchPad MSP430FR5969 — *not tested*
-
-----
-
-### Initialise the SD-card
-
-Parameters
-
-* `chipSelectPin` pin number for SD-card chip select
-* `sckRateID` SPI speed, optional, default=SPI_HALF_SPEED
-* `SPI_Port` SPI port number, optional, default=-1=none
-* `cardDetectionPin` card detection pin number, optional, default=-1=none
-* `level` expected level when SD-card available, default=LOW
-
-Result
-
-* true is success, false otherwise
-
-```
-    boolean begin(uint8_t chipSelectPin,
-                  uint8_t sckRateID = SPI_HALF_SPEED,
-                  int8_t SPI_Port = -1,
-                  int8_t cardDetectionPin = -1,
-                  int8_t level = LOW);
-    
-```
-
-### SD-card hardware detection
-
-Result
-
-* true is SD-card inserted, false otherwise
-
-Uses previously defined cardDetectionPin and level
-
-```
-    uint8_t detectSD();
-```
-
-### Licence
-
-Creative Commons [Attribution-NonCommercial-ShareAlike 4.0 International License](http://creativecommons.org/licenses/by-nc-sa/4.0/)
+
+----
+
+### Requirements
+
+SD-card in SPI mode requires a 512 bytes buffer for read-write operations. 
+
+Energia 12 
+
+Boards
+
+* LaunchPad Stellaris LM4F120 — *tested*
+* LaunchPad Tiva C Series TM4C123 — *tested*
+* LaunchPad Connected TM4C129 — *not tested*
+
+Other candidates
+
+* LaunchPad MSP430F5529 — *not tested*
+* LaunchPad MSP430FR5969 — *not tested*
+
+----
+
+### Initialise the SD-card
+
+Parameters
+
+* `chipSelectPin` pin number for SD-card chip select
+* `sckRateID` SPI speed, optional, default=SPI_HALF_SPEED
+* `SPI_Port` SPI port number, optional, default=-1=none
+* `cardDetectionPin` card detection pin number, optional, default=-1=none
+* `level` expected level when SD-card available, default=LOW
+
+Result
+
+* true is success, false otherwise
+
+```
+    boolean begin(uint8_t chipSelectPin,
+                  uint8_t sckRateID = SPI_HALF_SPEED,
+                  int8_t SPI_Port = -1,
+                  int8_t cardDetectionPin = -1,
+                  int8_t level = LOW);
+    
+```
+
+### SD-card hardware detection
+
+Result
+
+* true is SD-card inserted, false otherwise
+
+Uses previously defined cardDetectionPin and level
+
+```
+    uint8_t detectSD();
+```
+
+### Licence
+
+Creative Commons [Attribution-NonCommercial-ShareAlike 4.0 International License](http://creativecommons.org/licenses/by-nc-sa/4.0/)