Added missing docs folder

docs/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SPHINXPROJ    = pubtools-iib
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -0,0 +1,36 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+set SPHINXPROJ=pubtools-iib
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd

docs/source/CHANGELOG.rst

@@ -0,0 +1,8 @@
+ChangeLog
+=========
+
+0.1.0 (2020-02-18)
+------------------
+
+* Initial release.
+

docs/source/README.rst

@@ -0,0 +1 @@
+../../README.rst

docs/source/conf.py

@@ -0,0 +1,165 @@
+# -*- coding: utf-8 -*-
+#
+# Configuration file for the Sphinx documentation builder.
+#
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+import os
+import sys
+
+sys.path.append(os.path.abspath("../.."))
+
+
+# -- Project information -----------------------------------------------------
+
+project = u"pubtools-iib"
+copyright = u"2020, Jindrich Luza"
+author = u"Jindrich Luza"
+
+# The short X.Y version
+version = u"0.1"
+# The full version, including alpha/beta/rc tags
+release = u"0.1.0"
+
+
+# -- General configuration ---------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = ["sphinx.ext.autodoc", "sphinx.ext.viewcode", "sphinxarg.ext"]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ["_templates"]
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = ".rst"
+
+# The master toctree document.
+master_doc = "index"
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = u"en"
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path .
+exclude_patterns = []
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = "sphinx"
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = "alabaster"
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ["_static"]
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = "pubtools-iibdoc"
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (
+        master_doc,
+        "pubtools-iib.tex",
+        u"pubtools-iib Documentation",
+        u"Jindrich Luza",
+        "manual",
+    )
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [(master_doc, "pubtools-iib", u"pubtools-iib Documentation", [author], 1)]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (
+        master_doc,
+        "pubtools-iib",
+        u"pubtools-iib Documentation",
+        author,
+        "pubtools-iib",
+        "One line description of project.",
+        "Miscellaneous",
+    )
+]
+
+
+# -- Extension configuration -------------------------------------------------
+
+html_theme = "sphinx_rtd_theme"

docs/source/index.rst

@@ -0,0 +1,25 @@
+pubtools-iib's documentation
+============================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   README
+   modules/add_bundles
+   modules/rm_operators
+
+.. ##### ToDo: Rewrite about documentation indexes. #####
+
+.. toctree::
+   :maxdepth: 1
+
+   CHANGELOG
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`

docs/source/modules/add_bundles.rst

@@ -0,0 +1,23 @@
+Pubtools-iib-add-bundles
+========================
+
+
+.. argparse::
+   :module: pubtools.iib.iib_ops
+   :func: make_add_bundles_parser
+   :prog: pubtools-iib-add-bundles
+
+Example of usage
+------------------
+
+::
+
+  $ export PULP_PASSWORD="pulppassword"
+  $ pubtools-iib-add-bundles --pulp-url https://pulphost.example.com/\
+    --pulp-user pulp-user\
+    --pulp-repository index-image-repository\
+    --iib-server iibhostname.example.com\
+    --binary-image container-registry.example.com/binary/image:latest
+    --index-image container-registry.example.com/index/image:latest
+    --bundle container-registry.example.com/bundle/image:123
+    --arch x86_64

docs/source/modules/rm_operators.rst

@@ -0,0 +1,25 @@
+Pubtools-iib-remove-operators
+=============================
+
+
+.. argparse::
+   :module: pubtools.iib.iib_ops
+   :func: make_rm_operators_parser
+   :prog: pubtools-iib-remove-operators
+
+
+Example of usage
+------------------
+
+::
+
+  $ export PULP_PASSWORD="pulppassword"
+  $ pubtools-iib-remove-operators --pulp-url https://pulphost.example.com/\
+    --pulp-user pulp-user\
+    --pulp-repository index-image-repository\
+    --iib-server iibhostname.example.com\
+    --binary-image container-registry.example.com/binary/image:latest
+    --index-image container-registry.example.com/index/image:latest
+    --operator bundle/image:123
+    --arch x86_64
+