Working with Huawei FusionSolar

[EmAnzi3]

Hello,
As per the one of the last post I don't really have issue, I simply love the card and I'd like to replicate the app readings, FusionSolar, in HA.
In HA the integration mainly utilizes the following entities:
Home Usage (Load):

      home_usage:
        friendly_name: "Home Usage"
        unit_of_measurement: "W"
        value_template: >-
          {% set active_power = states('sensor.sun2000_8ktl_m1') | int %}
          {% set power_meter = state_attr('sensor.sun2000_8ktl_m1', 'power_meter_active_power') | int %}
          {% if power_meter < active_power %}
              {{ (active_power - power_meter) }}
          {% else %}
              {{ (0) | int }}
          {% endif %}

Power Imported from Grid:

      import_from_grid:
        friendly_name: "Power Imported from Grid"
        unit_of_measurement: "W"
        value_template: >-
          {% set pm_active_power = state_attr('sensor.sun2000_8ktl_m1', 'power_meter_active_power') | int %}
          {% if pm_active_power < 0 %}
              {{ (-1*pm_active_power) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}

PV Input Power:

      pv_input_power:
        friendly_name: "PV Input Power"
        unit_of_measurement: 'W'
        value_template: "{{ state_attr('sensor.sun2000_8ktl_m1', 'input_power') | float(0) }}"

Batteries charge/discharge readings are coming from sensor.storage_charge_discharge_power, this come directly from the integration. When value is positive the battery is charged by the PV system or from the external grid, when negative it feeds the Home Usage (Load).
How can I setup the card in order to properly distribute all the power flows? Thanks.

[EmAnzi3]

Any clue, please?

[sebrep]

Read the configuration from the tesla powerwall setup. Sure the variable names are different but you should be good with those. Otherwise search on the ha community website for someone that already did this or something similar.

[JacoboSanchez]

FusionSolar flow chart is different from this one as it has no direct lines between entities. They have intermediate units like meter and inverter and you must define individual lines from node to node. So to replicate it you must somehow define your own rules. All of this is a lot more complicated with batteries. I will post you my current configuration and templates... they may give wrong values in some situations as I am still monitoring and tweaking it.

Sensors (note that you need to substitute $CHARGE_DISCHARGE_POWER$, $POWER_METER_ACTIVE_POWER$, $INPUT_POWER$, $ACTIVE_POWER$)

  - platform: template
    sensors:
      grid_to_battery:
        friendly_name: "Grid to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = $ACTIVE_POWER$ | int %}
          {% set cdp = $CHARGE_DISCHARGE_POWER$ | int %}
          {% if ip < 0 and cdp > 0 %}
              {{ (-1 * ip) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}
      grid_to_house:
        friendly_name: "Grid to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set g_c = states('sensor.grid_consumption') | int %}
          {% set g_t_b = states('sensor.grid_to_battery') | int %}
          {{ (g_c-g_t_b) | int }}
      generation_to_battery:
        friendly_name: "Generation to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set b = states('sensor.battery_charge') | int %}
          {% set ap = $INPUT_POWER$ | int %}
          {% if b > 0 and ap > 0 and b < ap %}
              {{ (b) | int }}
          {% elif b > 0 and ap > 0 and b > ap %}
              {{ (ap) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
      generation_to_house:
        friendly_name: "Generation to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set pv = $INPUT_POWER$ | int %}
          {% set g_t_b = states('sensor.generation_to_battery') | int %}
          {% set g_t_gr = states('sensor.generation_to_grid') | int %}
          {% if (pv - g_t_b - g_t_gr) > 0 %}
              {{ (pv - g_t_b - g_t_gr) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}
      grid_consumption:
        friendly_name: "Grid consumption"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = $POWER_METER_ACTIVE_POWER$ | int %}
          {% if u < 0 %}
              {{ (- u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
      generation_to_grid:
        friendly_name: "Generation to grid"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = $INPUT_POWER$ | int %}
          {% set pmap = $POWER_METER_ACTIVE_POWER$ | int %}
          {% if pmap > 0 and ip > pmap%}
              {{ (pmap) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
      battery_to_house:
        friendly_name: "Battery to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = $CHARGE_DISCHARGE_POWER$ | int %}
          {% if u < 0 %}
              {{ (- u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
      battery_charge:
        friendly_name: "Battery charge"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = $CHARGE_DISCHARGE_POWER$ | int %}
          {% if u > 0 %}
              {{ (u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
      house_consumption:
        friendly_name: "House consumption"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set t = states('sensor.battery_to_house') | int %}
          {% set u = states('sensor.total_consumption') | int %}
          {{ (t + u) }}
      total_consumption:
        friendly_name: "Total consumption"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set t = $ACTIVE_POWER$ | int %}
          {% set u = $POWER_METER_ACTIVE_POWER$ | int %}
          {% if u < t %}
              {{ (t - u) }}
          {% else %}
              {{ (0) | int }}
          {% endif %}

Card configuration:

type: custom:tesla-style-solar-power-card
generation_to_house_entity: sensor.generation_to_house
generation_to_grid_entity: sensor.generation_to_grid
generation_to_battery_entity: sensor.generation_to_battery
grid_consumption_entity: sensor.grid_consumption
house_consumption_entity: sensor.house_consumption
grid_to_house_entity: sensor.grid_to_house
battery_to_house_entity: sensor.battery_to_house
battery_extra_entity: sensor.storage_state_of_capacity_102150268986
grid_to_battery_entity: sensor.grid_to_battery

(Hope I paste it correctly)

[MicheleMercuri]

maybe something wrong in sensor.grid_to_battery?

        friendly_name: "Grid to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = $ACTIVE_POWER$ | int %}
          {% set cdp = $CHARGE_DISCHARGE_POWER$ | int %}
          {% if ip < 0 and cdp > 0 %}
              {{ (-1 * ip) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}`

i've a inverter 5ktl + luna2000 huawey, so:
$ACTIVE_POWER$ = sensor.active_power_2 ("sensor.active_power_2" = is power sensor from grid and have negative value when take power "from grid")
$CHARGE_DISCHARGE_POWER$ = sensor.charge_discharge_power ( "sensor.charge_discharge_power" = is power sensor charge/discharge battery with positive value when charging BUT this sensor is also positive when is charging from PV)

[sebrep]

yes, it's the one that I don't have and I destroyed my test env so I'm flying blind

[JacoboSanchez]

Well that was the testing version I had at that moment... home consumption and total consumption there are probably messed up. As I said when I posted it there is no direct translation from data obtained from inverter to the flows used in the card so you have to make your own rules. That sensor assumes that if you are not charging from PV and grid at the same time as the only charge in my case is done by a few W to keep the SOC at 15-16%... if you force the charge from grid that may not be true and you should figure out how to take that into account.

If you manage to get a more realistic version please post it... I can post my current version... however it does have the same code for grid_to_battery

[JacoboSanchez]

Just copied it without formatting nor checking but this is what I am using right now, as I said a more precise version of grid_to_battery will be helpful for all of us.

       grid_to_battery:
        friendly_name: "Grid to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = states('sensor.active_power') | int %}
          {% set cdp = states('sensor.storage_charge_discharge') | int %}
          {% if ip < 0 and cdp > 0 %}
              {{ (-1 * ip) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.active_power') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.storage_charge_discharge') not in [ 'unavailable', 'none', 'unknown' ]) }}
      grid_to_house:
        friendly_name: "Grid to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set g_c = states('sensor.grid_consumption') | int %}
          {% set g_t_b = states('sensor.grid_to_battery') | int %}
          {{ (g_c-g_t_b) | int }}
        availability_template: >-
          {{ (states('sensor.grid_consumption') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.grid_to_battery') not in [ 'unavailable', 'none', 'unknown' ]) }}
      generation_to_battery:
        friendly_name: "Generation to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set b = states('sensor.battery_charge') | int %}
          {% set ap = states('sensor.input_power') | int %}
          {% if b > 0 and ap > 0 and b < ap %}
              {{ (b) | int }}
          {% elif b > 0 and ap > 0 and b > ap %}
              {{ (ap) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.battery_charge') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
      generation_to_house:
        friendly_name: "Generation to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set pv = states('sensor.input_power') | int %}
          {% set g_t_b = states('sensor.generation_to_battery') | int %}
          {% set g_t_gr = states('sensor.generation_to_grid') | int %}
          {% if (pv - g_t_b - g_t_gr) > 0 %}
              {{ (pv - g_t_b - g_t_gr) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.generation_to_battery') not in [ 'unavailable', 'none', 'unknown' ]) 
              and (states('sensor.generation_to_grid') not in [ 'unavailable', 'none', 'unknown' ]) }}
      grid_consumption:
        friendly_name: "Grid consumption"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = states('sensor.power_meter_active_power') | int %}
          {% if u < 0 %}
              {{ (- u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.power_meter_active_power') not in [ 'unavailable', 'none', 'unknown' ] )}}
      generation_to_grid:
        friendly_name: "Generation to grid"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = states('sensor.input_power') | int %}
          {% set pmap = states('sensor.power_meter_active_power') | int %}
          {% if pmap > 0 and ip > pmap%}
              {{ (pmap) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.power_meter_active_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
      battery_to_house:
        friendly_name: "Battery to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = states('sensor.storage_charge_discharge') | int %}
          {% if u < 0 %}
              {{ (- u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.storage_charge_discharge') not in [ 'unavailable', 'none', 'unknown' ] ) }}
      battery_charge:
        friendly_name: "Battery charge"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = states('sensor.storage_charge_discharge') | int %}
          {% if u > 0 %}
              {{ (u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.storage_charge_discharge') not in [ 'unavailable', 'none', 'unknown' ] ) }}
      house_consumption:
        friendly_name: "House consumption"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set t = states('sensor.battery_to_house') | int %}
          {% set u = states('sensor.grid_to_house') | int %}
          {% set g = states('sensor.generation_to_house') | int %}
          {{ (t + u + g) }}
        availability_template: >-
          {{ (states('sensor.battery_to_house') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.grid_to_house') not in [ 'unavailable', 'none', 'unknown' ]) 
              and (states('sensor.generation_to_house') not in [ 'unavailable', 'none', 'unknown' ]) }}```

[MicheleMercuri]

many thanks 4 your code, but I've not any better solution, I don't use charge to/from grid (jus deleted 2 sensors from lovelace).
I'm a newbe and your code is much better and "clean" than my code :)

`# sensor battery discharge
- platform: template  
  sensors:
    power_batt_disch_kwp:
      friendly_name: "Battery Power Dishcarge"
      unit_of_measurement: "W"
      value_template: >-
        {% if states('sensor.charge_discharge_power') | int < 0 %}
          {{(states('sensor.charge_discharge_power') | float * -1) | round(2)}}
        {% elif states('sensor.charge_discharge_power') | int >= 0 %}
          {{(states('sensor.charge_discharge_power') | float * 0) }}
        {% endif %}
# sensor battery charge
- platform: template  
  sensors:
    power_batt_ch_kwp:
      friendly_name: "Battery Power Charge"
      unit_of_measurement: "W"
      value_template: >-
        {% if states('sensor.charge_discharge_power') | int > 0 %}
          {{(states('sensor.charge_discharge_power') | float * 1) | round(2)}}
        {% elif states('sensor.charge_discharge_power') | int <= 0 %}
          {{(states('sensor.charge_discharge_power') | float * 0)}}
        {% endif %}
# sensor from grid power
- platform: template  
  sensors:
    power_grid_kwp:
      friendly_name: "Grid Power"
      unit_of_measurement: "W"
      value_template: >-
        {% if states('sensor.active_power_2') | int < 0 %}
          {{(states('sensor.active_power_2') | float * -1) | round(2)}}
        {% elif states('sensor.active_power_2') | int >= 0 %}
          {{(states('sensor.active_power_2') | float * 0)}}
        {% endif %}
# sensor PV to grid power
- platform: template  
  sensors:
    pv_to_grid_kwp:
      friendly_name: "PV to Grid Power"
      unit_of_measurement: "W"
      value_template: >-
        {% if states('sensor.active_power_2') | int > 0 %}
          {{(states('sensor.active_power_2') | float * 1) | round(2)}}
        {% elif states('sensor.active_power_2') | int <= 0 %}
          {{(states('sensor.active_power_2') | float * 0)}}
        {% endif %}
# sensor PV to house power
- platform: template
  sensors:
    pv_to_house_kwp:
      unit_of_measurement: "W"
      friendly_name: "PV to House Power"
      value_template: "{{ float(states('sensor.input_power')) - float(states('sensor.power_batt_ch_kwp')) }}"
# sensor house total power
- platform: template
  sensors:
    total_house_kwp:
      unit_of_measurement: "W"
      friendly_name: "Total House Power"
      value_template: "{{ float(states('sensor.active_power')) + float(states('sensor.power_grid_kwp')) }}"`

[serbat]

I've been trying for several days but still without results, I can't get the "tesla" card to work.

I don't understand how to set the sensors, yet for the graph below I managed to make it work, but for this card I just can't .....
Kindly, you can post your complete and updated code, the one posted above gives me the result as per the attached image ..
Thanks

[JacoboSanchez]

I did not any major modification from the configuration posted in this post. It is a template based on my sensor names, You should verify that you have the same names or adapt them in your configuration.

Also to check what is going on I suggest you to create a card showing the values for the different flows (grid_to_battery, generation_to_grid, etc..) so you can locate which one used in the flow card is giving you wrong results, for example with an entity card like the following (as allways you should check your own sensor names and adapt the configuration to use them):

type: entities
entities:
  - entity: sensor.generation_to_house
    name: generation_to_house
  - entity: sensor.generation_to_grid
    name: generation_to_grid
  - entity: sensor.generation_to_battery
    name: generation_to_battery_entity
  - entity: sensor.house_consumption
    name: house_consumption_entity
  - entity: sensor.grid_to_house
    name: grid_to_house_entity
  - entity: sensor.battery_to_house
    name: battery_to_house_entity
  - entity: sensor.storage_state_of_capacity
    name: battery_extra_entity
  - entity: sensor.grid_to_battery
    name: grid_to_battery_entity

[Brusta37]

Hi there,
I'm using the Huawei Solar Integration from wlcrs.
I tried to add the sensors as per your suggestion above but i'm not able to receive values from the "House_Consumption" sensor.
Checking the entity I can see it as "not available" and an error says that the ID is not unique. But even modifying the ID i continue to rceive the same error.
Any advice will be higly appreciated.

Below you can see the code that I'm using:
`

`#solar sensor
  - platform: template
    sensors:
      grid_to_battery:
        friendly_name: "Grid to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = states('sensor.grid_active_power') | int %}
          {% set cdp = states('sensor.charge_discharge_power') | int %}
          {% if ip < 0 and cdp > 0 %}
              {{ (-1 * ip) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.grid_active_power') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.charge_discharge_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
      grid_to_house:
        friendly_name: "Grid to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set g_c = states('sensor.grid_consumption2') | int %}
          {% set g_t_b = states('sensor.grid_to_battery') | int %}
          {{ (g_c-g_t_b) | int }}
        availability_template: >-
          {{ (states('sensor.grid_consumption2') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.grid_to_battery') not in [ 'unavailable', 'none', 'unknown' ]) }}
      generation_to_battery:
        friendly_name: "Generation to battery"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set b = states('sensor.battery_charge') | int %}
          {% set ap = states('sensor.input_power') | int %}
          {% if b > 0 and ap > 0 and b < ap %}
              {{ (b) | int }}
          {% elif b > 0 and ap > 0 and b > ap %}
              {{ (ap) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.battery_charge') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
      generation_to_house:
        friendly_name: "Generation to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set pv = states('sensor.input_power') | int %}
          {% set g_t_b = states('sensor.generation_to_battery') | int %}
          {% set g_t_gr = states('sensor.generation_to_grid') | int %}
          {% if (pv - g_t_b - g_t_gr) > 0 %}
              {{ (pv - g_t_b - g_t_gr) | int }}
          {% else %}
              {{ (0) }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.generation_to_battery') not in [ 'unavailable', 'none', 'unknown' ]) 
              and (states('sensor.generation_to_grid') not in [ 'unavailable', 'none', 'unknown' ]) }}
      grid_consumption2:
        friendly_name: "Grid consumption2"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = states('sensor.grid_active_power') | int %}
          {% if u < 0 %}
              {{ (- u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.grid_active_power') not in [ 'unavailable', 'none', 'unknown' ] )}}
      generation_to_grid:
        friendly_name: "Generation to grid"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set ip = states('sensor.input_power') | int %}
          {% set pmap = states('sensor.active_power') | int %}
          {% if pmap > 0 and ip > pmap%}
              {{ (pmap) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.active_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
      battery_to_house:
        friendly_name: "Battery to house"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = states('sensor.charge_discharge_power') | int %}
          {% if u < 0 %}
              {{ (- u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.charge_discharge_power') not in [ 'unavailable', 'none', 'unknown' ] ) }}
      battery_charge:
        friendly_name: "Battery charge"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set u = states('sensor.charge_discharge_power') | int %}
          {% if u > 0 %}
              {{ (u) | int }}
          {% else %}
              {{ (0) | int }}
          {% endif %}
        availability_template: >-
          {{ (states('sensor.charge_discharge_power') not in [ 'unavailable', 'none', 'unknown' ] ) }}
      house_consumption:
        friendly_name: "House consumption"
        unit_of_measurement: "W"
        device_class: power
        value_template: >-
          {% set t = states('sensor.battery_to_house') | int %}
          {% set u = states('sensor.grid_to_house') | int %}
          {% set g = states('sensor.generation_to_house') | int %}
          {{ (t + u + g) }}
        availability_template: >-
          {{ (states('sensor.battery_to_house') not in [ 'unavailable', 'none', 'unknown' ] )
              and (states('sensor.grid_to_house') not in [ 'unavailable', 'none', 'unknown' ]) 
              and (states('sensor.generation_to_house') not in [ 'unavailable', 'none', 'unknown' ]) }}```

Thanks

[davidalanon-1]

Hello, I have made some changes in generation_to_grid and generation_to_house and it works correctly for me.
configuration.yaml:

- platform: template
sensors:
 grid_to_battery:
    friendly_name: "Grid to battery"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set ip = states('sensor.grid_active_power') | int %}
      {% set cdp = states('sensor.charge_discharge_power') | int %}
      {% if ip < 0 and cdp > 0 %}
          {{ (-1 * ip) | int }}
      {% else %}
          {{ (0) }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.grid_active_power') not in [ 'unavailable', 'none', 'unknown' ] )
          and (states('sensor.charge_discharge_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
  grid_to_house:
    friendly_name: "Grid to house"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set g_c = states('sensor.grid_consumption2') | int %}
      {% set g_t_b = states('sensor.grid_to_battery') | int %}
      {{ (g_c-g_t_b) | int }}
    availability_template: >-
      {{ (states('sensor.grid_consumption2') not in [ 'unavailable', 'none', 'unknown' ] )
          and (states('sensor.grid_to_battery') not in [ 'unavailable', 'none', 'unknown' ]) }}
  generation_to_battery:
    friendly_name: "Generation to battery"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set b = states('sensor.battery_charge') | int %}
      {% set ap = states('sensor.input_power') | int %}
      {% if b > 0 and ap > 0 and b < ap %}
          {{ (b) | int }}
      {% elif b > 0 and ap > 0 and b > ap %}
          {{ (ap) | int }}
      {% else %}
          {{ (0) | int }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.battery_charge') not in [ 'unavailable', 'none', 'unknown' ] )
          and (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ]) }}
  generation_to_house:
    friendly_name: "Generation to house"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set pv = states('sensor.input_power') | int %}
      {% set pmap = states('sensor.active_power') | int %}
      {% set g_t_b = states('sensor.generation_to_battery') | int %}
      {% set g_t_gr = states('sensor.generation_to_grid') | int %}
      {% if (pv > pmap) %}
          {{ pmap | int }}		   
      {% elif (pv - g_t_b - g_t_gr) > 0 %}
          {{  (pv - g_t_b - g_t_gr) | int }}
      {% else %}
          {{ (0) }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.input_power') not in [ 'unavailable', 'none', 'unknown' ] )
          and (states('sensor.generation_to_battery') not in [ 'unavailable', 'none', 'unknown' ]) 
          and (states('sensor.generation_to_grid') not in [ 'unavailable', 'none', 'unknown' ]) }}
   grid_consumption2:
    friendly_name: "Grid consumption2"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set u = states('sensor.grid_active_power') | int %}
      {% if u < 0 %}
          {{ (- u) | int }}
      {% else %}
          {{ (0) | int }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.grid_active_power') not in [ 'unavailable', 'none', 'unknown' ] )}}
  generation_to_grid:
    friendly_name: "Generation to grid"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set g2g = states('sensor.grid_active_power') | int %}
      {% if (g2g) > 0 %}
          {{ (g2g) | int }}
      {% else %}
          {{ (0) | int }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.grid_active_power') not in [ 'unavailable', 'none', 'unknown' ] )}}
   battery_to_house:
    friendly_name: "Battery to house"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set u = states('sensor.charge_discharge_power') | int %}
      {% if u < 0 %}
          {{ (- u) | int }}
      {% else %}
          {{ (0) | int }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.charge_discharge_power') not in [ 'unavailable', 'none', 'unknown' ] ) }}
  battery_charge:
    friendly_name: "Battery charge"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set u = states('sensor.charge_discharge_power') | int %}
      {% if u > 0 %}
          {{ (u) | int }}
      {% else %}
          {{ (0) | int }}
      {% endif %}
    availability_template: >-
      {{ (states('sensor.charge_discharge_power') not in [ 'unavailable', 'none', 'unknown' ] ) }}
  house_consumption:
    friendly_name: "House consumption"
    unit_of_measurement: "W"
    device_class: power
    value_template: >-
      {% set t = states('sensor.battery_to_house') | int %}
      {% set u = states('sensor.grid_to_house') | int %}
      {% set g = states('sensor.generation_to_house') | int %}
      {{ (t + u + g) }}
    availability_template: >-
      {{ (states('sensor.battery_to_house') not in [ 'unavailable', 'none', 'unknown' ] )
          and (states('sensor.grid_to_house') not in [ 'unavailable', 'none', 'unknown' ]) 
          and (states('sensor.generation_to_house') not in [ 'unavailable', 'none', 'unknown' ]) }}

Lovelace Card:

type: custom:tesla-style-solar-power-card
generation_to_house_entity: sensor.generation_to_house
generation_to_grid_entity: sensor.generation_to_grid
generation_to_battery_entity: sensor.generation_to_battery
grid_consumption_entity: sensor.grid_consumption
house_consumption_entity: sensor.house_consumption
grid_to_house_entity: sensor.grid_to_house
battery_to_house_entity: sensor.battery_to_house
grid_to_battery_entity: sensor.grid_to_battery
battery_extra_entity: sensor.battery_state_of_capacity
hide_inactive_lines: 1
show_gap: true

[Brusta37]

Hi Thank you so much for the help. They are now working correctly. Unfortunately I’m still having problems with house consumption sensor (shows as “Not Available”). Do you have any suggestion?

[davidalanon-1]

Dear @Brusta37,
The house_consumtion template has 3 sensor in the code:
- sensor.battery_to_house
- sensor.grid_to_house
- sensor.generation_to_house

Check that you have these sensors in home assistant, and if they have different names, change it in the template code.

Best regards,
David.

[Brusta37]

Hi David,
Thanks for your reply.
I'm using exactly the code that you have shared, so the names should be fine.

[davidalanon-1]

Dear Brusta37,
You have to delete the three quotes at the end of the last line, it's already fixed in the previous post.
I hope it works for you.