-
Notifications
You must be signed in to change notification settings - Fork 47
List of confirmed working air con units
Cam Murray edited this page Jun 20, 2024
·
92 revisions
Please update this if you use the Faikin and find it works with your model.
The code should work with a BRP069B41, BRP069C41, or similar WiFi modules work connecting to S21 or X50 ports.
Mostly models will be S21 unless otherwise specified. Please do add more detail if you can, or ask in a discussion.
Current Amazon listing (UK) is the model that supports 5V working on Tx and Rx.
See Wiring.
| Model | Description | Notes |
|---|---|---|
| FTXB12BXVJU | Entra wall mount | S21, lead not pre-installed, fits inside the case |
| FTXJ25MV1BS | Wall mount | Fits inside the case, lead seems to be pre-installed |
| FTXM25F3V1B9 | Ducted | Needs cable, uses X50 port |
| FTXS12LVJU | Wall-Mount | |
| FTXS09LVJU | Wall-Mount | |
| FTXS24LVJU | Wall-Mount | |
| FTXS25DAVMW | Wall-Mount | S21, powerful not working #329 |
| FTXS35DAVMW | Wall-Mount | S21, powerful not working #329 |
| FTXS35KVMA | Wall-Mount | S21, fits inside the case |
| FTXS35G2V1B | Wall-Mount | S21, powerful not working #329 |
| FTX24UVJU | Wall-Mount | S21, fits inside the case |
| FTXS15WVJU9 | Wall-Mount | S21, fits inside the case |
| FTXS09WVJU9 | Wall-Mount | S21, fits inside the case |
| CTXS07LVJU | Wall-Mount | |
| CTXS07WVJU9 | Wall-Mount | S21, fits inside the case |
| CTXS09HVJU | Wall mount | S21 connector present, lead not pre-installed |
| ADEA71A2VEB | Sky Air, Ducted | Needs cable, uses X35A (power supply) and X50A (communication) ports |
| FTXM20R2V1B | Perfera wall-mounted | Working with S21 socket - see #49 |
| FTXF20D5V1B | Sensira wall-mounted | Working with ESP8266 port |
| FTXF35D5V1B | Sensira wall-mounted | |
| FTXF42D5V1B | Sensira wall-mounted | |
| FVXG25K2V1B | Nexura Series Floor Standing Unit | S21, No radiant heating control (as with official controller) |
| FVXG35K2V1B | Nexura Series Floor Standing Unit | S21, No radiant heating control (as with official controller) |
| FDXS50CVMB | Slim Concealed Ceiling Unit | S21, Older unit (2008) |
| FTXJ20A2V1BW | Daikin Emura 3 | Photos - bought an EKRS21 cable, had to join s21 male-to-male |
| FTXSxxG2V1B | Daikin Perfera | S21 socket with no 5V power (only 14.5). TTL 3.3V compatible. Does not allow: Powerful and Eco modes control and reporting, Power consumption, FAN quiet mode, presence sensor. Fan, Mode, Power, H and V swing, Ext-Int-Coil temp, compressor idle state working |
| FTXPxxMxxxxx | Daikin Comfora | S21 (no lead installed), does not work with 3.3V signals. Works with 5V signal or open drain signal. See #62 |
| FTXS50JVMA | 2010 wall-mount | S21 |
| FTX25K2V1B | Needs newest model, with 5V Tx working | |
| CTXMxxRxV1B | Perfera 2022 | new (smaller) S21 port (PAP-05V-S), original Daikin adapter cable to old S21 P/N: EKRS21, all 5 cables need to be connected, usable place for original wifi module 45mm X 36mm (cut PCB to size) below metal shield (pictures) |
| FTXMxxRxV1B | Perfera 2022 | new (smaller) S21 port (PAP-05V-S), original Daikin adapter cable to old S21 P/N: EKRS21, all 5 cables need to be connected, usable place for original wifi module 45mm X 36mm (cut PCB to size) below metal shield (pictures) |
| FTXS35CVMB8 | Old 2006 wall mount model | connection via S21 port, all seems to be working except for "Powerful" mode. Home Leave, Silent and Sensor are not available options |
| FTXS35GVMA | 2010 Wall-Mount | S21 port. Fits perfectly inside the case. |
| FNA35A2VEB9 | FAN-A9 Concealed floor standing unit | S21 port, ducted outside of unit |
| FBA71BVLT | Ceiling(TW) | X50A with X35 |
| CDXS50DVMT | Ceiling(TW) | Original S21 adapter (JST EKR-5) |
| FTXS25DVMT | Wall-Mount(TW) | Original S21 adapter (JST EKR-5) |
| FTXV**SVLT | Wall-Mount(TW) | Original S21 adapter (JST EKR-5) |
| FTXM**RVLT | Wall-Mount(TW) | Original S21 adapter (JST EKR-5) |
| FDXV**RVLT | Wall-Mount(TW) | Original S21 adapter (JST EKR-5) |
| FTXM**VVLT | Wall-Mount(TW) | Mini S21 port (JST PAP-05V-S) |
| FTHF40VVLT | Wall-Mount(TW) | S403 Connector (JST PAP-10V-S) |
| FTHF20RVLT | Wall-Mount(TW) | S403 Connector (JST PAP-10V-S) |
| FTKS35DVMT | Wall-Mount | Old Model(2005) |
| FBQ50C7VEB | Concealed Ceiling Unit | Uses X50 port |
| FTXS71LVMA | S21 Connector present, I used 4 F-F jumper leads between main board and faikin. | |
| FTXA42A2V1 | Stylish 2022 | S21 Connector present, used 1x 5016537, 1x EKRS21. fits perfectly in place of the original WiFi module |
| CTXM15R | Perfera 2021 | S21 Connector present, used 1x 5016537, 1x EKRS21. fits perfectly in place of the original WiFi module |
| FTXM20R | Perfera 2021 | S21 Connector present, used 1x 5016537, 1x EKRS21. fits perfectly in place of the original WiFi module |
| FTXR42EV | Wall-Mount | S21 Connector. Everything working correctly except specific humidity modes and outside air renewal of Ururu Sarara models. |
| FTXR12WVJUW9 | Wall-Mount Emura Series | S21 connector. Cable was factory provided. Module easily fits in mounting location for OEM module. |
| FTXS25LVMA | S21 Connector present, used 5x F-F dupont jumper cables | |
| FTXNG09AXVJU | S21 Connector present, joined two s21 (EH) male-to-male cables | |
| FVXMxxA3V1B | Perfera Floor Standing Unit | New S21 PA Connector, needs JST EH to PA (PAP-05V-S) cable (same as new Perfera Wall-Mount). Fits in place of the original WiFi module. Most things working. Not working: Heat+, Floor Warming mode. The Led/Eye brightness can be changed setting noled to false. |
| FTKS35CVMB8 | Wall-Mount | Old Model(2004) S21 Connector 5 pin, reversed connector orientation. |
| FTXS40JVLT | Wall-Mount | S21 |
| FTXM50PVMA | Wall-Mount | S21 Connector present, used 5x F-F dupont jumper cables |
| FTXM46RVMZ | Wall-Mount | S403 Connector present, requires 5V signals, used 5x F-F dupont jumper cables then connected to header |
| CTXA15AW | Stylish Wall-Mount | New S21 PA Connector, needs JST EH to PA (PAP-05V-S) cable |
| FTXA50C2V1BW | Stylish Wall-Mount | S21, needs EKRS21, used 30cm 5xF-F Dupont, works with installed original wifi BRP069C4x |
| FTXA25C2V1BS | Stylish Wall-Mount | S21 (new style JST PAP-05V-S connector so requires a cable with that or the EKRS21 to convert it back to JST EH-5; pinout is the same either way). Built-in wifi has its own connector, not S21, so I left that alone. I used EHR-5, BEH-001T-P0.6, PAP-05V-S, SPHD-001T-P0.5 and 24 AWG multicore to make a cable (crimp tool required). Ideal cable length is 35-37cm. There's space underneath the end wiring panel to tape the Faikin to. |
| FTXMxxA2V1B | Perfera 2024 | S21 Connector present |
| ATX35JV1B | Daikin 'Siesta' Wall-mount | No native S21, used a KRP980B1 wired remote interface board. |
| FTXS35K3V1B | Wall-mount | Native S21, used an ESP C3 supermini with a transformer from 14Vcc to 5Vcc and a logic TTL converter for Rx and Tx. |
| FTXA35C2V1B | Stylish Wall-Mount | S21 Connector present |
| FTKU35BV1MF | Daikin Deluxe (Wall-Mount) | S21 Connector present, used 30cm 5pin JST EHR 2.5mm to Dupont cable. Powerful, Eco+ mode not support |
| ATXF25E | Siesta Wall-Mount | Used S403 Connector with a pin-to-pin custom cable |
Any not working - please advise.