Added a few more packets, described RGBW set

Protocol.md

@@ -75,6 +75,7 @@ packet
 ## List of packet types
 
 ### Network management
+ * 0x01 - Set site - app to bulb
  * [0x02 - Get PAN gateway](#0x02) - app to bulb
  * [0x03 - PAN gateway](#0x03) - bulb to app
 
@@ -112,12 +113,11 @@ packet
  * [0x67 - Set waveform](#0x67) - app to bulb
  * [0x68 - Set dim (absolute)](#0x68) - app to bulb
  * [0x69 - Set dim (relative)](#0x69) - app to bulb
+ * [0x6a - Set light color (RGBW)](#0x6a) - app to bulb
  * [0x6b - Light status](#0x6b) - bulb to app
-
-### Time
- * [0x04 - Get time](#0x04) - app to bulb
- * [0x05 - Set time](#0x05) - app to bulb
- * [0x06 - Time state](#0x06) - bulb to app
+ * [0x6e - Get temperature](#0x6e) - app to bulb
+ * [0x6f - Temperature state](#0x6f) - bulb to app
+ * 0x70 - Set calibration coefficients - app to bulb
 
 ### Diagnostic
  * [0x07 - Get reset switch](#0x07) - app to bulb
@@ -138,6 +138,13 @@ packet
  * [0x26 - Reboot](#0x26) - app to bulb
  * [0x27 - Set Factory Test Mode](#0x27) - app to bulb
  * [0x28 - Disable Factory Test Mode](#0x28) - app to bulb
+ * 0x29 - Factory Test Mode State - bulb to app
+ * 0x6c - Get rail voltage - app to bulb
+ * 0x6d - Rail voltage state - bulb to app
+ * 0x191 - Get ambient light - app to bulb
+ * 0x192 - Ambient light state - bulb to app
+ * 0x193 - Get dimmer voltage - app to bulb
+ * 0x194 - Dimmer voltage state - bulb to app
 
 ## Description of packet types
 
@@ -788,6 +795,21 @@ payload {
 }
 ```
 
+### <a name="0x6a"></a>0x6a - Set light color (RGBW)
+
+Sent to a bulb to set its color, via RGBW values (as opposed to [HSBK](#0x66)).
+
+#### Payload (8 bytes)
+
+```c
+payload {
+  uint16 blue;
+  uint16 green;
+  uint16 red;
+  uint16 white;
+}
+```
+
 ### <a name="0x6b"></a>0x6b - Light status
 
 Sent by a bulb after a request for light state. If this packet is received
@@ -808,6 +830,30 @@ payload {
 }
 ```
 
+### <a name="0x6e"></a>0x6e - Get light temperature
+
+Sent to a bulb to request its current light temperature.
+
+#### Payload (0 bytes)
+
+```c
+payload {
+  // None
+}
+```
+
+### <a name="0x6f"></a>0x6f - Light temperature
+
+Received from a bulb after a request for its light temperature.
+
+#### Payload (2 bytes)
+
+```c
+payload {
+  uint16 temperature;
+}
+```
+
 ### <a name="0x12d"></a>0x12d - Get wifi state
 
 Sent to a bulb to retrieve state on one of its wireless interfaces.