sunxi: copy config and patches from 5.10 to 5.15

So the upcoming changes needed for 5.15 can be reviewed easily.

Removed following upstreamed patches:

 * 062-add-sun8i-h3-zeropi-support.patch
 * 100-sunxi-h3-add-support-for-nanopi-r1.patch
 * 101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch

Signed-off-by: Petr Štetiar <ynezz@true.cz>

target/linux/sunxi/cortexa53/config-5.15

@@ -0,0 +1,83 @@
+CONFIG_64BIT=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+# CONFIG_ARM64_PTR_AUTH is not set
+# CONFIG_ARM64_SVE is not set
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
+CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DWMAC_SUN8I=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MICREL_PHY=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NO_IOPORT_MAP=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_PINCTRL_SUN50I_A100=y
+CONFIG_PINCTRL_SUN50I_A100_R=y
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_SUN50I_A64_R=y
+CONFIG_PINCTRL_SUN50I_H5=y
+CONFIG_PINCTRL_SUN50I_H6=y
+CONFIG_PINCTRL_SUN50I_H6_R=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_RTC_DRV_SUN6I=y
+# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SUN50I_A100_CCU=y
+CONFIG_SUN50I_A100_R_CCU=y
+CONFIG_SUN50I_A64_CCU=y
+CONFIG_SUN50I_DE2_BUS=y
+CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
+CONFIG_SUN50I_H6_CCU=y
+CONFIG_SUN50I_H6_R_CCU=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB_MUSB_DUAL_ROLE=y
+# CONFIG_USB_MUSB_GADGET is not set
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_PHY=y
+CONFIG_VMAP_STACK=y
+CONFIG_ZONE_DMA32=y

target/linux/sunxi/cortexa7/config-5.15

@@ -0,0 +1,24 @@
+CONFIG_B53=y
+CONFIG_B53_MDIO_DRIVER=y
+CONFIG_DWMAC_SUN8I=y
+CONFIG_GRO_CELLS=y
+# CONFIG_MACH_SUN4I is not set
+# CONFIG_MACH_SUN5I is not set
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MICREL_PHY=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_BRCM_COMMON=y
+CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
+CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_USB_MUSB_DUAL_ROLE=y
+# CONFIG_USB_MUSB_GADGET is not set
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_PHY=y

target/linux/sunxi/cortexa8/config-5.15

@@ -0,0 +1,10 @@
+# CONFIG_ARM_LPAE is not set
+# CONFIG_MACH_SUN6I is not set
+# CONFIG_MACH_SUN7I is not set
+# CONFIG_MACH_SUN8I is not set
+# CONFIG_MACH_SUN9I is not set
+CONFIG_PGTABLE_LEVELS=2
+# CONFIG_PHY_SUN9I_USB is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SUN8I_A83T_CCU is not set
+# CONFIG_SUN8I_THERMAL is not set

target/linux/sunxi/patches-5.15/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch

@@ -0,0 +1,30 @@
+From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sun, 10 Oct 2021 21:50:17 +0800
+Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5
+
+This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
+NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration
+register to match the blink behavior of the other port on the device.
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -112,6 +112,13 @@
+
+ &ehci1 {
+ 	status = "okay";
++
++	usb-eth@1 {
++		compatible = "realtek,rtl8153";
++		reg = <1>;
++
++		realtek,led-data = <0x78>;
++	};
+ };
+
+ &ehci2 {

target/linux/sunxi/patches-5.15/301-orangepi_pc2_usb_otg_to_host_key_power.patch

@@ -0,0 +1,20 @@
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+@@ -59,7 +59,7 @@
+
+ 		sw4 {
+ 			label = "sw4";
+-			linux,code = <BTN_0>;
++			linux,code = <KEY_POWER>;
+ 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ 			wakeup-source;
+ 		};
+@@ -220,7 +220,7 @@
+ };
+
+ &usb_otg {
+-	dr_mode = "otg";
++	dr_mode = "host";
+ 	status = "okay";
+ };
+

target/linux/sunxi/patches-5.15/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch

@@ -0,0 +1,46 @@
+From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
+From: Oskari Lemmela <oskari@lemmela.net>
+Date: Mon, 31 Dec 2018 07:44:49 +0200
+Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
+
+First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
+Next 128kB to u-boot environment and rest to firmware.
+
+Firmware partition is compatible FIT image dynamic splitting.
+
+Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
+---
+ .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+@@ -58,6 +58,28 @@
+ 		compatible = "jedec,spi-nor";
+ 		reg = <0>;
+ 		spi-max-frequency = <40000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "u-boot";
++				reg = <0x000000 0x0E0000>;
++			};
++
++			partition@e0000 {
++				label = "u-boot-env";
++				reg = <0x0E0000 0x020000>;
++			};
++
++			partition@100000 {
++				compatible = "denx,fit";
++				label = "firmware";
++				reg = <0x100000 0xF00000>;
++			};
++		};
+ 	};
+ };
+

target/linux/sunxi/patches-5.15/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch

@@ -0,0 +1,32 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
+Date: Thu, 26 Mar 2020 10:09:19 +0100
+Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+@@ -15,6 +15,10 @@
+ 	aliases {
+ 		ethernet0 = &emac;
+ 		serial0 = &uart0;
++		led-boot = &led_user;
++		led-failsafe = &led_user;
++		led-running = &led_user;
++		led-upgrade = &led_user;
+ 	};
+
+ 	chosen {
+@@ -35,7 +39,7 @@
+ 	leds {
+ 		compatible = "gpio-leds";
+
+-		led-0 {
++		led_user: led-0 {
+ 			label = "a64-olinuxino:red:user";
+ 			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+ 		};

target/linux/sunxi/patches-5.15/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch

@@ -0,0 +1,35 @@
+From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sun, 10 Oct 2021 21:50:18 +0800
+Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases
+
+Use the SYS LED on the casing for showing system status.
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -22,6 +22,11 @@
+ 		ethernet0 = &emac;
+ 		ethernet1 = &rtl8189etv;
+ 		serial0 = &uart0;
++
++		led-boot = &led_sys;
++		led-failsafe = &led_sys;
++		led-running = &led_sys;
++		led-upgrade = &led_sys;
+ 	};
+
+ 	chosen {
+@@ -31,7 +36,7 @@
+ 	leds {
+ 		compatible = "gpio-leds";
+
+-		sys {
++		led_sys: sys {
+ 			label = "nanopi:red:sys";
+ 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ 			linux,default-trigger = "heartbeat";

target/linux/sunxi/patches-5.15/442-arm64-dts-orangepi-one-plus-enable-PWM.patch

@@ -0,0 +1,10 @@
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+@@ -41,3 +41,7 @@
+ 		reg = <1>;
+ 	};
+ };
++
++&pwm {
++	status = "okay";
++};

target/linux/sunxi/patches-5.15/450-arm64-dts-enable-wifi-on-pine64-boards.patch

@@ -0,0 +1,72 @@
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+@@ -42,6 +42,11 @@
+ 		regulator-min-microvolt = <1800000>;
+ 		regulator-max-microvolt = <1800000>;
+ 	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++	};
+ };
+
+ &ac_power_supply {
+@@ -102,6 +107,21 @@
+ 		reg = <1>;
+ 	};
+ };
++
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins>;
++	vmmc-supply = <&reg_dldo4>;
++	vqmmc-supply = <&reg_eldo1>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	rtl8723cs: wifi@1 {
++		reg = <1>;
++	};
++};
+
+ &mmc2 {
+ 	pinctrl-names = "default";
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -35,6 +35,11 @@
+ 			};
+ 		};
+ 	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++	};
+ };
+
+ &codec {
+@@ -124,6 +129,21 @@
+ 	status = "okay";
+ };
+
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins>;
++	vmmc-supply = <&reg_dldo4>;
++	vqmmc-supply = <&reg_eldo1>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	rtl8723cs: wifi@1 {
++		reg = <1>;
++	};
++};
++
+ &ohci0 {
+ 	status = "okay";
+ };