data-prep.Rmd

---
title: "Preparing the data"
author: "Robert Schlegel"
date: "2020-02-25"
output: workflowr::wflow_html
editor_options:
  chunk_output_type: console
csl: FMars.csl
bibliography: MHWflux.bib
---

```{r global_options, include = FALSE}
knitr::opts_chunk$set(fig.width = 8, fig.align = 'center',
                      echo = TRUE, warning = FALSE, message = FALSE, 
                      eval = TRUE, tidy = FALSE)
```

<!-- Look at the NOAA SST instead of GLORYS -->
<!-- Compare the GORYS and OISST MHW results -->

## Introduction

Much of the code in this vignette is taken entirely or partially from the [study area prep](https://robwschlegel.github.io/MHWNWA/polygon-prep.html), the [MHW prep](https://robwschlegel.github.io/MHWNWA/sst-prep.html), and the [gridded data prep](https://robwschlegel.github.io/MHWNWA/var-prep.html) vignettes from the drivers of MHWs in the NW Atlantic [project](https://robwschlegel.github.io/MHWNWA/index.html). Because this process has already been established we are going to put it all together in this one vignette in a more streamlined manner.

All of the libraries and functions used in this vignette, and the project more broadly may be found [here](https://github.com/robwschlegel/MHWflux/blob/master/code/functions.R).

```{r satrtup}
# get everything up and running in one go
source("code/functions.R")
library(SDMTools) # For finding points within polygons
```

## Study area

A reminder of what the study area looks like. It has been cut into 6 regions, adapted from work by @Richaud2016.

```{r region-fig}
frame_base +
  geom_polygon(data = NWA_coords, alpha = 0.7, size = 2,
               aes(fill = region, colour = region)) +
  geom_polygon(data = map_base, aes(group = group))
```

## Pixels per region

In this study it was decided to use the higher resolution 1/12th degree GLORYS data. This means we will need to re-calculate which pixels fall within which region so we can later determine how to create our average SST time series per region as well as the other averaged heat flux term time series.

```{r grid-points, eval=FALSE}
# Load one GLORYS file to extract the lon/lat coords
GLORYS_files <- dir("../data/GLORYS", full.names = T, pattern = "MHWflux")
GLORYS_grid <- tidync(GLORYS_files[1]) %>% 
  hyper_tibble() %>% 
  dplyr::rename(lon = longitude, lat = latitude) %>% 
  dplyr::select(lon, lat) %>% 
  unique()

# Load one ERA5 file to get the lon/lat coords
ERA5_files <- dir("../../oliver/data/ERA/ERA5/LWR", full.names = T, pattern = "ERA5")
ERA5_grid <- tidync(ERA5_files[1]) %>% 
  hyper_filter(latitude = dplyr::between(latitude, min(NWA_coords$lat), max(NWA_coords$lat)),
               longitude = dplyr::between(longitude, min(NWA_coords$lon)+360, max(NWA_coords$lon)+360),
               time = index == 1) %>%
  hyper_tibble() %>% 
  dplyr::rename(lon = longitude, lat = latitude) %>% 
  dplyr::select(lon, lat) %>% 
  unique() %>% 
  mutate(lon = lon-360)

# Function for finding and cleaning up points within a given region polygon
pnts_in_region <- function(region_in, product_grid){
  region_sub <- NWA_coords %>% 
    filter(region == region_in)
  coords_in <- pnt.in.poly(pnts = product_grid[,c("lon", "lat")], poly.pnts = region_sub[,c("lon", "lat")]) %>% 
    filter(pip == 1) %>% 
    dplyr::select(-pip) %>% 
    mutate(region = region_in)
  return(coords_in)
}

# Run the function
GLORYS_regions <- plyr::ldply(unique(NWA_coords$region), pnts_in_region, 
                              .parallel = T, product_grid = GLORYS_grid)
saveRDS(GLORYS_regions, "data/GLORYS_regions.Rda")
ERA5_regions <- plyr::ldply(unique(NWA_coords$region), pnts_in_region, 
                            .parallel = T, product_grid = ERA5_grid)
saveRDS(ERA5_regions, "data/ERA5_regions.Rda")
```

```{r grid-points-visual}
GLORYS_regions <- readRDS("data/GLORYS_regions.Rda")
ERA5_regions <- readRDS("data/ERA5_regions.Rda")

# Combine for visual
both_regions <- rbind(GLORYS_regions, ERA5_regions) %>% 
  mutate(product = c(rep("GLORYS", nrow(GLORYS_regions)),
                     rep("ERA5", nrow(ERA5_regions))))

# Visualise to ensure success
ggplot(NWA_coords, aes(x = lon, y = lat)) +
  # geom_polygon(aes(fill = region), alpha = 0.2) +
  geom_point(data = both_regions, aes(colour = region)) +
  geom_polygon(data = map_base, aes(group = group), show.legend = F) +
    coord_cartesian(xlim = NWA_corners[1:2],
                  ylim = NWA_corners[3:4]) +
  labs(x = NULL, y = NULL) +
  facet_wrap(~product)
```

## Average time series per region

With our pixels per region sorted we may now go about creating the average time series for each region from the GLORYS and ERA5 data. First we will load a brick of the data constrained roughly to the study area into memory before assigning the correct pixels to their regions. Once the pixels are assigned we will summarise them into one mean time series per variable per region. These mean time series are what the rest of the analyses will depend on.

The code for loading and processing the GLORYS data.

```{r GLORYS-prep, eval=FALSE}
# Set number of cores
  # NB: This is very RAM heavy, be carfeul with core use
doParallel::registerDoParallel(cores = 25)

# The GLORYS file location
GLORYS_files <- dir("../data/GLORYS", full.names = T, pattern = "MHWflux")
system.time(
GLORYS_all_ts <- load_all_GLORYS_region(GLORYS_files) %>% 
  dplyr::arrange(region, t) %>% 
  mutate(cur_spd = round(sqrt(u^2 + v^2), 2),
         cur_dir = round((270-(atan2(v, u)*(180/pi)))%%360))
) # 187 seconds on 25 cores
saveRDS(GLORYS_all_ts, "data/GLORYS_all_ts.Rda")
```

The code for the ERA5 data. NB: The ERA5 data are on an hourly 0.25x0.25 spatiotemporal grid. This loading process constrains them to a daily 0.25x0.25 grid.

```{r ERA5-prep, eval=FALSE}
# See the code/workflow script for the code used for ERA5 data prep
# There is too much code to run from an RMarkdown document
```

## MHWs per region

We will be using the SST value from GLORYS for calculating the MHWs and will use the standard Hobday definition with a base period of 1993-01-01 to 2018-12-25. We are using an uneven length year as the data do not quite extend to the end of December. It was decided that the increased accuracy of the climatology from the 2018 year outweighed the negative consideration of having a clim period that excludes a few days of winter.

Ke pointed out however that it may be better to use the NOAA OISST data. The reasoning being that because we are not fully closing the heat budget with GLORYS, there is no particular benefit to using the SST data from that modelled ensemble product. Rather it would be better to use the remotely observed NOAA OISST product as this is a more direct measure of the surface temperature of the ocean.

```{r MHW-calc, eval=FALSE}
# Load the data
GLORYS_all_ts <- readRDS("data/GLORYS_all_ts.Rda")

# Calculate the MHWs
GLORYS_region_MHW <- GLORYS_all_ts %>%
  dplyr::select(region:temp) %>% 
  group_by(region) %>%
  nest() %>%
  mutate(clims = map(data, ts2clm,
                     climatologyPeriod = c("1993-01-01", "2018-12-25")),
         events = map(clims, detect_event),
         cats = map(events, category, S = FALSE)) %>%
  select(-data, -clims)

# Save
saveRDS(GLORYS_region_MHW, "data/GLORYS_region_MHW.Rda")
saveRDS(GLORYS_region_MHW, "shiny/GLORYS_region_MHW.Rda")

# The MHW calculations from the NOAA OISST data may be found here:
OISST_region_MHW <- readRDS("../MHWNWA/data/OISST_region_MHW.Rda")
```

## Clims + anoms per variable

The analyses to come are going to be performed on anomaly values, not the original time series. In order to calculate the anomalies we are first going to need the climatologies for each variable. We will use the Hobday definition of climatology creation and then subtract the expected climatology from the observed values. We are again using the 1993-01-01 to 2018-12-25 base period for these calculations to ensure consistency throughout the project.

```{r clims, eval=FALSE}
# Load the data
GLORYS_all_ts <- readRDS("data/GLORYS_all_ts.Rda")
ERA5_all_ts <- readRDS("data/ERA5_all_ts.Rda")
ALL_ts <- left_join(ERA5_all_ts, GLORYS_all_ts, by = c("region", "t"))

# Calculate GLORYS clims and anoms
ALL_anom <- ALL_ts %>%
  dplyr::select(-wind_dir, -cur_dir) %>% 
  pivot_longer(msnlwrf:cur_spd, names_to = "var", values_to = "val") %>% 
  group_by(region, var) %>%
  nest() %>%
  mutate(clims = map(data, ts2clm, y = val, roundClm = 6,
                     climatologyPeriod = c("1993-01-01", "2018-12-25"))) %>% 
  dplyr::select(-data) %>% 
  unnest(cols = clims) %>%
  mutate(anom = val-seas) %>% 
  ungroup()

# Save
saveRDS(ALL_anom, "data/ALL_anom.Rda")
saveRDS(ALL_anom, "shiny/ALL_anom.Rda")
```

## Cumulative heat flux terms

We also need to create cumulative heatflux terms. This is done by taking the first day during the MHW and adding them to each other as we go along. This daily cumulative product should then be divided by the MLD on that day. This approximates the air-sea flux term. We also need water density and specific heat constant. Q/(rho x Cp x hmld). rho = 1042, Cp ~= 4000. And then these daily air-sea flux values are added together each day to create the cumulative flux time series. This is done for Qnet, not the individual terms. I think it would also be useful to calculate the rate of change of the cumulative heat-flux term.

The movement terms aren't very useful and may not be worth including as they don't really show advection. So rather one can say that the parts of the heating that aren't explained by anything else could be attributed to advection through the process of elimination.

```{r cum-heat-flux, eval=FALSE}
# We're going to switch over to the NOAA OISST data for MHWs now
# OISST_region_MHW <- readRDS("../MHWNWA/data/OISST_region_MHW.Rda")
# Actually sticking with GLORYS MHWs for now
ALL_anom_cum <- ALL_anom %>%
  dplyr::select(region, var, t, anom) %>% 
  pivot_wider(id_cols = c(region, var, t), names_from = var, values_from = anom) %>% 
  dplyr::select(region:msshf, msl, qnet, tcc, p_e) %>% 
  left_join(GLORYS_MHW_clim[,c("region", "t", "event_no")], by = c("region", "t")) %>% 
  filter(event_no > 0) %>% 
  group_by(region, event_no) %>% 
  mutate_if(is.numeric, cumsum) %>% 
  ungroup() %>% 
  dplyr::select(region, event_no, t, everything()) %>% 
  pivot_longer(cols = msnlwrf:p_e, names_to = "var", values_to = "anom") %>% 
  mutate(var = paste0(var,"_cum")) %>% 
  dplyr::select(region, var, event_no, t, anom)

# Save
saveRDS(ALL_anom_cum, "data/ALL_anom_cum.Rda")
saveRDS(ALL_anom_cum, "shiny/ALL_anom_cum.Rda")
```

```{r mld-heat-flux, eval=FALSE}
ALL_anom_mld <- ALL_anom %>%
  dplyr::select(region, var, t, anom) %>% 
  left_join(GLORYS_all_ts[,c("region", "t", "mld")], by = c("region", "t")) %>%
  mutate(anom = anom/(mld*1042*4000)) %>% 
  pivot_wider(id_cols = c(region, var, t), names_from = var, values_from = anom) %>% 
  dplyr::select(region:msshf, qnet) %>% 
  left_join(GLORYS_MHW_clim[,c("region", "t", "event_no")], by = c("region", "t")) %>% 
  filter(event_no > 0) %>% 
  group_by(region, event_no) %>% 
  mutate_if(is.numeric, cumsum) %>% 
  ungroup() %>% 
  dplyr::select(region, event_no, t, everything()) %>% 
  pivot_longer(cols = msnlwrf:qnet, names_to = "var", values_to = "anom") %>% 
  mutate(var = paste0(var,"_mld")) %>% 
  dplyr::select(region, var, event_no, t, anom)

# Save
saveRDS(ALL_anom_mld, "data/ALL_anom_mld.Rda")
saveRDS(ALL_anom_mld, "shiny/ALL_anom_mld.Rda")
```

And that's all there is to it. In the next vignette we will take the periods of time over which MHWs occurred per region and pair those up with the GLORYS and ERA5 data. This will be used to investigate which drivers are best related to the onset and decline of MHWs.

## References