Releases: rotorflight/rotorflight-configurator
Rotorflight Configurator Release 2.0.0
This is the first official Release of the Rotorflight-2 Configurator.
Downloads
The download locations for Rotorflight 2.0.0 are:
- Rotorflight Configurator
- Rotorflight Blackbox
- LUA Scripts for EdgeTx and OpenTx
- LUA Scripts for FrSky Ethos
Notes
-
There is a new website www.rotorflight.org for Rotorflight-2. The old Wiki in github is deprecated, and is for Rotorflight-1 only. Big thanks to the documentation team for setting this up!
-
Rotorflight-2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
Support
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here.
Discord is the primary location for support, questions and discussions. The developers are all active there,
and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there.
This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
Changes
RF2 is built on Betaflight 4.3, and is rewritten from ground up, with the experience learned from Rotorflight-1.
Lots of things have changed in the two years of development. A full changelog can be found in
git.
Changes since 2.0.0-RC3
- Update translated locales
- Fix reset default values in Rates
Rotorflight Configurator Release Candidate 2.0.0-RC3
This is the third Release Candidate of the Rotorflight-2 Configurator.
Downloads
The official download locations for Rotorflight 2.0.0-RC3 are:
- Rotorflight Configurator
- Rotorflight Blackbox
- LUA Scripts for EdgeTx and OpenTx
- LUA Scripts for FrSky Ethos
Notes
-
There is a new website www.rotorflight.org for Rotorflight-2. The old Wiki in github is deprecated, and is for Rotorflight-1 only. Big thanks to the documentation team for setting this up!
-
Rotorflight-2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
Support
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here.
Discord is the primary location for support, questions and discussions. The developers are all active there,
and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there.
This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
Changes
RF2 is built on Betaflight 4.3, and is rewritten from ground up, with the experience learned from Rotorflight-1.
Lots of things have changed in the two years of development. A full changelog can be found in
git.
Changes since 2.0.0-RC2
- Add cyclic decay parameters to Profiles
- Fix saving default Profile and Rates Profile
- Fix output throttle PWM limits
- Extend governor max throttle range to 0..100%
- Extend rescue rate limit to 1000
- Show PID gain help icons
- Disable unavailable telemetry protocols in ESC telemetry dropdown
- New Donate button that works also in China
- Update translated locales
Rotorflight Configurator Release Candidate 2.0.0-RC2
This is the second Release Candidate of the Rotorflight-2 Configurator.
Downloads
The official download locations for Rotorflight 2.0.0-RC2 are:
- Rotorflight Configurator
- Rotorflight Blackbox
- LUA Scripts for EdgeTx and OpenTx
- LUA Scripts for FrSky Ethos
Notes
-
There is a new website www.rotorflight.org for Rotorflight-2. The old Wiki in github is deprecated, and is for Rotorflight-1 only. Big thanks to the documentation team for setting this up!
-
Rotorflight-2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
Support
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here.
Discord is the primary location for support, questions and discussions. The developers are all active there,
and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there.
This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
Changes
RF2 is built on Betaflight 4.3, and is rewritten from ground up, with the experience learned from Rotorflight-1.
Lots of things have changed in the two years of development. A full changelog can be found online later.
Changes since 2.0.0-RC1
- Accept all MSP compatible firmware
- Extend yaw Mixer override to -60°..60°
- Adjust RPM filter defaults
- Add GOV_MODE to FrSky telemetry sensors
- Fix top bar battery gadget to show battery info from the FC
- Update links to point to www.rotorflight.org
- Add a notice for Configurator development versions
- Update english messages
- Update translations (de,nl,fr)
- Hide untranslated locales
- Update startup page
- Add Donation info
- Hide builtin ChangeLog
- Update README.md and HOWTO.md
- Remove old NSIS installer
Rotorflight Configurator Release Candidate 2.0.0-RC1
Release Candidate
This is the first Release Candidate of the Rotorflight 2 Configurator.
Downloads
The official download locations for Rotorflight 2.0.0-RC1 are:
Notes
-
There is a new website www.rotorflight.org for Rotorflight 2.
The old Wiki in github is deprecated, and is for Rotorflight-1 only.
Big thanks to the documentation team for setting this up! -
Rotorflight 2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
Support
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here.
Discord is the primary location for support, questions and discussions. The developers are all active there,
and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there.
This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
Changes
RF2 is based on Betaflight 4.3.x, and is rewritten from ground up, with the experience learned from Rotorflight-1.
Lots of things have changed in the two years of development. A full changelog can be found online later.
Changes since 2.0.0-20240218
- Fix Zoom function
- Relax servo rate limits
- Refactor MSP_SERVO_CONFIGURATIONS
- Change default channel order to AECR1T23
- Add vendor names in receiver protocols
- Many fixes in labels and help texts
- Update locales for translation
Rotorflight Configurator Snapshot 2.0.0-20240218
Snapshot Release
This version is a development snapshot, intended to be used only for beta-testing.
It is not fully working nor stable, and should not be used by end-users.
The Configurator is currently under development, so please expect
many things to be broken, and changing rapidly.
For more information, please join the Rotorflight Discord chat.
Changes from 2.0.0-20240128
- Add OpenYGE ESC protocol
- Add Battery Cell Count to Power tag
- Add Governor Precomp Bandwidth to Motors tab
- Relax servo parameter checks
- Increase max yaw to 60° in Mixer
- Improved code in Status page0
- Refactor MSP_BATTERY_CONFIG
Rotorflight Configurator Snapshot 2.0.0-20240128
Snapshot Release
This version is a development snapshot, intended to be used only for beta-testing.
It is not fully working nor stable, and should not be used by end-users.
The Configurator is currently under development, so please expect
many things to be broken, and changing rapidly.
For more information, please join the Rotorflight Discord chat.
Changes from 2.0.0-20240105
- Fix tail trim rounding
- Fix yaw direction in Rates tab
- Refactor config handling in Power tab
- Show Charge level in Power tab
- Show Realtime Load on the bottom bar
- Add Yaw precomp (lowpass filter) cutoff
- Move RPM Sensor switch to Motors tab
- Add GOVERNOR to ARMING Disabled flags
- Update zh_CN locale
- Add TTA Debug mode
- Add CMS feature flag
- Add Setpoint Response time and acceleration on Rates tab
Rotorflight Configurator Snapshot 2.0.0-20240105
Snapshot Release
This version is a development snapshot, intended to be used only for beta-testing.
It is not fully working nor stable, and should not be used by end-users.
The Configurator is currently under development, so please expect
many things to be broken, and changing rapidly.
For more information, please join the Rotorflight Discord chat.
Changes from 2.0.0-20231127
- Change default PID mode to 3
- Change swashplate trims to RPC
- Change tail trim value limits
- Refactor Voltage and Current sensors
- Update Dynamic Notch debug names
- Add temperature and voltage logging to Blackbox
- Fix Cancel button in Enable Arming dialog
- Fix dark colours in a few places
- Show positive yaw limits with both CW & CCW
- Move Gyro and Beepers tabs lower
- Add Collective geometry correction
- Add dynamic Wiki links
- Add labels to Mixer override sliders
- Fix blade pitch limit maximum
- Fix value limits enforcement in number fields
- Hide Rescue Alt Hold
- Hide OSD Feature
- Update locales for translation
Rotorflight Configurator Snapshot 2.0.0-20231127
Snapshot Release
This version is a development snapshot, intended to be used only for beta-testing.
It is not fully working nor stable, and should not be used by end-users.
The Configurator is currently under development, so please expect
many things to be broken, and changing rapidly.
For more information, please join the Rotorflight Discord chat.
Changes from 2.0.0-20231118
- Fix MSP_ESC_SENSOR_CONFIG (hw4 parameter corruption)
- Fix Adjustment slider limits on double-click
- Fix Arming box size limits
- Add limits to Throttle values in Receiver tab
- Use reference design port names in Serial port config
Changes from 2.0.0-20231018
- Adjustment tab refactored
- Enable Arming added to Status tab
- Arming Throttle Level added to Receiver tab
- Governor Handover Throttle added to Motors
- MSP messages updated to match the firmware
- A flasher bug fixed (board field empty)
- German and Chinese locales updated
Rotorflight Configurator Snapshot 2.0.0-20231118
Snapshot Release
This version is a development snapshot, intended to be used only for beta-testing.
It is not fully working nor stable, and should not be used by end-users.
The Configurator is currently under development, so please expect
many things to be broken, and changing rapidly.
For more information, please join the Rotorflight Discord chat.
Changes from 2.0.0-20231018
- Adjustment tab refactored
- Enable Arming added to Status tab
- Arming Throttle Level added to Receiver tab
- Governor Handover Throttle added to Motors
- MSP messages updated to match the firmware
- A flasher bug fixed (board field empty)
- German and Chinese locales updated
Rotorflight Configurator Snapshot 2.0.0-20231018
Snapshot Release
This version is a development snapshot, intended to be used only for beta-testing.
It is not fully working nor stable, and should not be used by end-users.
The Configurator is currently under development, so please expect
many things to be broken, and changing rapidly.
For more information, please join the Rotorflight Discord chat.
Changes from 2.0.0-20230912
- Receiver tab refactored to match firmware
- Receiver telemetry added
- Rates tab fixed to use new MSP messages
- Status tab fixed to show correct channel values
- Failsafe refactored - advanced failsafe disabled
- ESC telemetry added to Motors tab
- Governor max throttle added to Profiles
- Governor feature handling simplified
- RPM filter feature handling simplified
- Dynamic Notch filter added to Gyro tab
- Localisation improved - most texts are translated
- All locales updated with new english messages