Skip to content


Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
3D printer concept
branch: master


Doing a total evaluation and improvement of the Adapto 3D printer design

First new files Y-rod clamps both 8mm and 10mm
latest commit 1ccff5f351
@rotorit authored
Failed to load latest commit information.
Adapto_V_3.0_ RedesigningAdapto
Old/RP_Parts RedesigningAdapto
.gitattributes Creating folders and uploading STL file
Readme.txt edited Readme file
license.txt Created new files


Be hold


The thought behind the Adapto 3D printer is that one can use the same printed parts on printers with different types of materials(in the frame).

The history behind this design is that i got hold of some alu extrusions that was intended to be used
on a MendelMax
During the MM build i got so extremely annoyed with how over engineered it is so I decided to tear the MM apart in favor to make a design that only used 50% of the MM extrusions(that means i now have enough extrusions for 2 printers :D ).

I also designed the parts in a way that makes the builder able to use either Alu extrusions (20x20mm), wood, alu, acryl plates or plates made out of any material actually(if it is stiff enough). 

I recommend to use max 34mm wide frame parts(due to the design of the feet`s), but thinner is ok if the material is stiff enough. Wider than 34mm IS not impossible though.

On the todo list is:

- make endstop holder for the X axes.(or maybe someone else makes one I like and I adopt it into the design? )
- Make endstop adjuster for the Z axes.(or maybe someone else makes one I like and I adopt it into the design? )
- make all the parts in OpenSCAD... << HELP ME PLEASE!!! >> ( i dont know how to openscad :/ )


If you decide to build one, please feel free to add a pin on the Adapto map.

Creative Commons - GNU GPL license
Something went wrong with that request. Please try again.