OpenGL error rpcs3-x86.exe #8
Comments
|
i think i had the same problem, but DH fixed it, so here is the file: http://www.sendspace.com/file/s69vse |
|
I could solve the problem by testing lots of stuff and using GLGSRender.cpp file just prior to this, DHrpcs3@a9fdcd9 and everything works great :) Ekaseo I tested your file and it does not work, this is the file that break GLGSRender.cpp problem must DHrpcs3 the rule compare two files and see what line of code causes this problem :) |
|
so cool :P |
|
problem fixed with the revision DHrpcs3@8259006 |
Nekotekina
pushed a commit
that referenced
this issue
Jun 22, 2017
* sys_net: don't use fds_bits from a system header on FreeBSD
rpcs3/Emu/Cell/Modules/sys_net.cpp:137:14: error: no member named '__fds_bits' in
'sys_net::fd_set'; did you mean 'fds_bits'?
if (src->fds_bits[i] & (1 << bit))
^~~~~~~~
fds_bits
/usr/include/sys/select.h:75:18: note: expanded from macro 'fds_bits'
#define fds_bits __fds_bits
^
rpcs3/Emu/Cell/Modules/sys_net.h:114:13: note: 'fds_bits' declared here
be_t<u32> fds_bits[32];
^
* GUI: fallback to xdg-open on other Unices
rpcs3/Gui/GameViewer.cpp:289:26: error: use of undeclared identifier 'command'
wxExecute(fmt::FromUTF8(command));
^
* File: FreeBSD never supported copyfile(3) but sendfile(2) works fine
Utilities/File.cpp:114:10: fatal error: 'copyfile.h' file not found
#include <copyfile.h>
^~~~~~~~~~~~
* Thread: add signal handling for BSDs
Utilities/Thread.cpp:761:23: error: use of undeclared identifier 'REG_RAX'
static const decltype(REG_RAX) reg_table[] =
^
Utilities/Thread.cpp:763:2: error: use of undeclared identifier 'REG_RAX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:11: error: use of undeclared identifier 'REG_RCX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:20: error: use of undeclared identifier 'REG_RDX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:29: error: use of undeclared identifier 'REG_RBX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:38: error: use of undeclared identifier 'REG_RSP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:47: error: use of undeclared identifier 'REG_RBP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:56: error: use of undeclared identifier 'REG_RSI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:65: error: use of undeclared identifier 'REG_RDI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:764:2: error: use of undeclared identifier 'REG_R8'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:10: error: use of undeclared identifier 'REG_R9'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:18: error: use of undeclared identifier 'REG_R10'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:27: error: use of undeclared identifier 'REG_R11'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:36: error: use of undeclared identifier 'REG_R12'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:45: error: use of undeclared identifier 'REG_R13'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:54: error: use of undeclared identifier 'REG_R14'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:63: error: use of undeclared identifier 'REG_R15'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:72: error: use of undeclared identifier 'REG_RIP'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:792:26: error: no member named 'gregs' in '__mcontext'
const u64 reg_value = *X64REG(context, reg - X64R_RAX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:804:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AL));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:809:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AH) >> 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:815:31: error: no member named 'gregs' in '__mcontext'
const s8 imm_value = *(s8*)(RIP(context) + i_size - 1);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:827:33: error: no member named 'gregs' in '__mcontext'
const s16 imm_value = *(s16*)(RIP(context) + i_size - 2);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:836:33: error: no member named 'gregs' in '__mcontext'
const s32 imm_value = *(s32*)(RIP(context) + i_size - 4);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:846:20: error: no member named 'gregs' in '__mcontext'
out_value = (u32)RCX(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:779:18: note: expanded from macro 'RCX'
#define RCX(c) (*X64REG((c), 1))
^~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: no member named 'gregs' in '__mcontext'
const u32 _cf = EFLAGS(context) & 0x1;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:852:19: error: no member named 'gregs' in '__mcontext'
const u32 _zf = EFLAGS(context) & 0x40;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:852:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:853:19: error: no member named 'gregs' in '__mcontext'
const u32 _sf = EFLAGS(context) & 0x80;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:853:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:854:19: error: no member named 'gregs' in '__mcontext'
const u32 _of = EFLAGS(context) & 0x800;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:854:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:855:19: error: no member named 'gregs' in '__mcontext'
const u32 _pf = EFLAGS(context) & 0x4;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:855:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:885:12: error: no member named 'gregs' in '__mcontext'
case 1: *X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, re...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:885:62: error: no member named 'gregs' in '__mcontext'
...*X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, reg - X64R_RAX) & 0xffffff...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:12: error: no member named 'gregs' in '__mcontext'
case 2: *X64REG(context, reg - X64R_RAX) = value & 0xffff | *X64REG(context, ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:64: error: no member named 'gregs' in '__mcontext'
...reg - X64R_RAX) = value & 0xffff | *X64REG(context, reg - X64R_RAX) & 0xffff0000; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:887:12: error: no member named 'gregs' in '__mcontext'
case 4: *X64REG(context, reg - X64R_RAX) = value & 0xffffffff; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:888:12: error: no member named 'gregs' in '__mcontext'
case 8: *X64REG(context, reg - X64R_RAX) = value; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x1; // set CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:917:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x1; // clear CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:917:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:922:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x40; // set ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:922:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:926:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x40; // clear ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:926:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:931:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x80; // set SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:931:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:935:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x80; // clear SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:935:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:940:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x800; // set OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:940:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:944:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x800; // clear OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:944:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:953:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x4; // set PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:953:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:957:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x4; // clear PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:957:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:962:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x10; // set AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:962:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:966:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x10; // clear AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:966:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:976:7: error: no member named 'gregs' in '__mcontext'
if (EFLAGS(context) & 0x400 /* direction flag */)
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:976:7: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:1020:25: error: no member named 'gregs' in '__mcontext'
auto code = (const u8*)RIP(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1146:3: error: no member named 'gregs' in '__mcontext'
RIP(context) += i_size;
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:47: error: no member named 'gregs' in '__mcontext'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:53: error: use of undeclared identifier 'REG_ERR'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
^
Utilities/Thread.cpp:1393:89: error: no member named 'gregs' in '__mcontext'
...%s location %p at %p.", cause, info->si_addr, RIP(context)));
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
* Thread: add explict casts for incomplete pthread_t on some platforms
Utilities/Thread.cpp:1467:17: error: no viable overloaded '='
ctrl->m_thread = thread;
~~~~~~~~~~~~~~ ^ ~~~~~~
Utilities/Atomic.h:776:12: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const atomic_t<unsigned long>' for 1st
argument
atomic_t& operator =(const atomic_t&) = delete;
^
Utilities/Atomic.h:902:7: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const type' (aka 'const unsigned long') for
1st argument
type operator =(const type& rhs)
^
Utilities/Thread.cpp:1656:3: error: no matching function for call to 'pthread_detach'
pthread_detach(m_thread.raw());
^~~~~~~~~~~~~~
/usr/include/pthread.h:218:6: note: candidate function not viable: no known conversion from 'type'
(aka 'unsigned long') to 'pthread_t' (aka 'pthread *') for 1st argument
int pthread_detach(pthread_t);
^
* build: dlopen() maybe in libc
/usr/bin/ld: cannot find -ldl
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: iconv() maybe available on some BSDs in libc
/usr/bin/ld: cannot find -liconv
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: hidapi-hidraw is only built on Linux
/usr/bin/ld: cannot find -lhidapi-hidraw
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* Thread: use getrusage() on more POSIX-like systems
* Qt: don't return NULL handle on other platforms
rpcs3/rpcs3qt/gs_frame.cpp:120:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
* build: properly disable Vulkan on other platforms
In file included from rpcs3/rpcs3_app.cpp:40:
In file included from rpcs3/Emu/RSX/VK/VKGSRender.h:3:
rpcs3/Emu/RSX/VK/VKHelpers.h:1209:42: error: unknown type name 'device_queues'
std::vector<VkBool32> supportsPresent(device_queues);
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1211:4: error: expected member name or ';' after declaration specifiers
for (u32 index = 0; index < device_queues; index++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1221:4: error: expected member name or ';' after declaration specifiers
for (u32 i = 0; i < device_queues; i++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1256:4: error: expected member name or ';' after declaration specifiers
if (graphicsQueueNodeIndex != presentQueueNodeIndex)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1261:4: error: expected member name or ';' after declaration specifiers
CHECK_RESULT(vkGetPhysicalDeviceSurfaceFormatsKHR(dev, surface, &formatCount, nullptr));
^
[...]
/usr/bin/ld: cannot find -lvulkan
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: make install/strip work by moving commands
* Qt: create surface for GL context if it wasn't ready
#0 strlen (str=0x0) at /usr/src/lib/libc/string/strlen.c:100
#1 0x000000000090f02e in std::__1::char_traits<char>::length (__s=0x0)
at /usr/include/c++/v1/__string:215
#2 std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::basic_string (__s=0x0, this=<optimized out>) at /usr/include/c++/v1/string:1547
#3 gl::capabilities::initialize (this=0x2ba32a0 <gl::g_driver_caps>)
at rpcs3/Emu/RSX/GL/GLHelpers.h:133
#4 0x000000000090d3dd in gl::get_driver_caps () at rpcs3/Emu/RSX/GL/GLHelpers.cpp:56
#5 0x00000000008fa511 in GLGSRender::on_init_thread (this=0x838d30018)
at rpcs3/Emu/RSX/GL/GLGSRender.cpp:484
#6 0x0000000000938f9e in rsx::thread::on_task (this=0x838d30018)
at rpcs3/Emu/RSX/RSXThread.cpp:334
#7 0x0000000000abc329 in task_stack::task_type<named_thread::start_thread(std::__1::shared_ptr<void> const&)::$_10>::invoke() ()
#8 0x0000000000abc114 in thread_ctrl::start(std::__1::shared_ptr<thread_ctrl> const&, task_stack)::$_7::__invoke(void*) ()
#9 0x0000000801e60c35 in thread_start (curthread=0x843650a00)
at /usr/src/lib/libthr/thread/thr_create.c:289
#10 0x0000000000000000 in ?? ()
* build: don't abort without git metadata
-- Found Git: /usr/local/bin/git (found version "2.13.1")
fatal: Not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Warning at git-version.cmake:12 (message):
git rev-list failed, unable to include version.
* build: non-parallel needs git-version.h earlier
rpcs3/rpcs3_version.cpp:3:10: fatal error: 'git-version.h' file not found
#include "git-version.h"
^~~~~~~~~~~~~~~
1 error generated.
ghost
mentioned this issue
Closed
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have this error since this version DHrpcs3@a9fdcd9, but only on the x86 build, but because the market still on x64 Windows 8 x64.
So no Elf does not work, please fix this.
thank you.
The text was updated successfully, but these errors were encountered: