New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Injector duty reading half of reality #5542
Comments
@ElDominio without tune I do not know if you are in GDI mode with GDI mode setting we are limited to 50% duty cycle |
Can guarantee not GDi, but cannot guarantee not GDi mode; i wish this persons internet was not absolutely horrifying |
Let him check the "Number of lobes" setting (should be 0) in the Controller->"HPFP Cam Configuration" dialog. |
Seems to be caused by #5416 Default tune has three lobes and too many users are now affected. Changing check to look at output pin not lobes. |
@ElDominio a work-around would be to set Controller->"HPFP Cam Configuration" -> "Number of lobes" to zero |
Was set to 3, the seller FINALLY gave me the tune |
@ElDominio that's rusEFI issue we had bad default and deciding GDI mode because of it. Gdi mode logic changed now. |
Describe the bug
Injector duty is half of real, was hitting Fuel Cut Code 10 (duty) and injector duty was at 50%
Hardware
4chan revH
To Reproduce
rev to a place where you ask for more than 96% duty
check reported duty
Expected behavior
read 100% instead of 50%
test trigeer.zip
Log shows fuel cut code and current duty being 50%
The text was updated successfully, but these errors were encountered: