SDRPager

POCSAG pager software based on soundcard generation of baseband signal

Authors:

• Ralf Wilke DH3WR, Aachen
• Michael Delissen, Aachen
• Marvin Menzerath, Aachen
• Philipp Thiel DL6PT, Aachen

This software is released free of charge under the Creative Commons License of type "by-nc-sa". No commercial use is allowed. The software licenses of the used libs as stated below apply in any case.

Run

• Install RXTX
  • sudo apt-get install librxtx-java
  • alternatively: follow these instructions
• Run java -Djava.library.path=/usr/lib/jni -jar FunkrufSlave.jar

Example-Configuration

#[slave config]
# Port
port=1337

# Allowed Masters, seperated by a space
master=127.0.0.1

# Correctionfactor
correction=0.35

# Serial: Port, Pin. If no Serial Port output is desired, change to serial = - DTR
serial=/dev/ttyS0 DTR

# GPIO-Pin: RasPi-Type / GPIO-Pin
gpio=RaspberryPi_3B / GPIO 9

# Additional configuration of Serial and GPIO

# use gpio / serial
use=gpio

# 1 (yes) / 0 (no)
invert=1

# in ms
delay=100

# Sound Device (as it is identified by AudioSystem.getMixerInfo())
sounddevice=ALSA [default]

# LogLevel
# NORMAL = 0; DEBUG_CONNECTION = 1; DEBUG_SENDING = 2; DEBUG_TCP = 3;
loglevel=0

Build

• Java JDK 1.8
• Libraries
  • Pi4J
    • pi4j-core.jar
    • pi4j-device.jar
    • pi4j-gpio-extension.jar
    • pi4j-service.jar
  • RXTX