Skip to content

Commit

Permalink
Linux AIO Support
Browse files Browse the repository at this point in the history
nfsd uses do_readv_writev() to implement fops->read and fops->write.
do_readv_writev() will attempt to read/write using fops->aio_read and
fops->aio_write, but it will fallback to fops->read and fops->write when
AIO is not available. However, the fallback will perform a call for each
individual data page. Since our default recordsize is 128KB, sequential
operations on NFS will generate 32 DMU transactions where only 1
transaction was needed. That was unnecessary overhead and we implement
fops->aio_read and fops->aio_write to eliminate it.

ZFS originated in OpenSolaris, where the AIO API is entirely implemented
in userland's libc by intelligently mapping them to VOP_WRITE, VOP_READ
and VOP_FSYNC.  Linux implements AIO inside the kernel itself. Linux
filesystems therefore must implement their own AIO logic and nearly all
of them implement fops->aio_write synchronously. Consequently, they do
not implement aio_fsync(). However, since the ZPL works by mapping
Linux's VFS calls to the functions implementing Illumos' VFS operations,
we instead implement AIO in the kernel by mapping the operations to the
VOP_READ, VOP_WRITE and VOP_FSYNC equivalents. We therefore implement
fops->aio_fsync.

One might be inclined to make our fops->aio_write implementation
synchronous to make software that expects this behavior safe. However,
there are several reasons not to do this:

1. Other platforms do not implement aio_write() synchronously and since
the majority of userland software using AIO should be cross platform,
expectations of synchronous behavior should not be a problem.

2. We would hurt the performance of programs that use POSIX interfaces
properly while simultaneously encouraging the creation of more
non-compliant software.

3. The broader community concluded that userland software should be
patched to properly use POSIX interfaces instead of implementing hacks
in filesystems to cater to broken software. This concept is best
described as the O_PONIES debate.

4. Making an asynchronous write synchronous is non sequitur.

Any software dependent on synchronous aio_write behavior will suffer
data loss on ZFSOnLinux in a kernel panic / system failure of at most
zfs_txg_timeout seconds, which by default is 5 seconds. This seems like
a reasonable consequence of using non-compliant software.

It should be noted that this is also a problem in the kernel itself
where nfsd does not pass O_SYNC on files opened with it and instead
relies on a open()/write()/close() to enforce synchronous behavior when
the flush is only guarenteed on last close.

Exporting any filesystem that does not implement AIO via NFS risks data
loss in the event of a kernel panic / system failure when something else
is also accessing the file. Exporting any file system that implements
AIO the way this patch does bears similar risk. However, it seems
reasonable to forgo crippling our AIO implementation in favor of
developing patches to fix this problem in Linux's nfsd for the reasons
stated earlier. In the interim, the risk will remain. Failing to
implement AIO will not change the problem that nfsd created, so there is
no reason for nfsd's mistake to block our implementation of AIO.

It also should be noted that `aio_cancel()` will always return
`AIO_NOTCANCELED` under this implementation. It is possible to implement
aio_cancel by deferring work to taskqs and use `kiocb_set_cancel_fn()`
to set a callback function for cancelling work sent to taskqs, but the
simpler approach is allowed by the specification:

```
Which operations are cancelable is implementation-defined.
```

http://pubs.opengroup.org/onlinepubs/009695399/functions/aio_cancel.html

The only programs on my system that are capable of using `aio_cancel()`
are QEMU, beecrypt and fio use it according to a recursive grep of my
system's `/usr/src/debug`. That suggests that `aio_cancel()` users are
rare. Implementing aio_cancel() is left to a future date when it is
clear that there are consumers that benefit from its implementation to
justify the work.

Closes:
openzfs#223
openzfs#2373

Signed-off-by: Richard Yao <ryao@gentoo.org>
  • Loading branch information
ryao committed Aug 7, 2014
1 parent 61e99a7 commit 5956bd4
Show file tree
Hide file tree
Showing 2 changed files with 106 additions and 18 deletions.
1 change: 1 addition & 0 deletions include/sys/zpl.h
Expand Up @@ -33,6 +33,7 @@
#include <linux/writeback.h>
#include <linux/falloc.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/aio.h>

/* zpl_inode.c */
extern void zpl_vap_init(vattr_t *vap, struct inode *dir,
Expand Down
123 changes: 105 additions & 18 deletions module/zfs/zpl_file.c
Expand Up @@ -115,6 +115,12 @@ zpl_fsync(struct file *filp, struct dentry *dentry, int datasync)
return (error);
}

static int
zpl_aio_fsync(struct kiocb *iocb, int datasync)
{
struct file *filp = iocb->ki_filp;
return (zpl_fsync(filp, filp->f_path.dentry, datasync));
}
#elif defined(HAVE_FSYNC_WITHOUT_DENTRY)
/*
* Linux 2.6.35 - 3.0 API,
Expand All @@ -137,6 +143,11 @@ zpl_fsync(struct file *filp, int datasync)
return (error);
}

static int
zpl_aio_fsync(struct kiocb *iocb, int datasync)
{
return (zpl_fsync(iocb->ki_filp, datasync));
}
#elif defined(HAVE_FSYNC_RANGE)
/*
* Linux 3.1 - 3.x API,
Expand All @@ -163,25 +174,29 @@ zpl_fsync(struct file *filp, loff_t start, loff_t end, int datasync)

return (error);
}

static int
zpl_aio_fsync(struct kiocb *iocb, int datasync)
{
return (zpl_fsync(iocb->ki_filp, iocb->ki_pos,
iocb->ki_pos + iocb->ki_nbytes, datasync));
}
#else
#error "Unsupported fops->fsync() implementation"
#endif

ssize_t
zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
uio_seg_t segment, int flags, cred_t *cr)
zpl_read_common_iovec(struct inode *ip, const struct iovec *iovp, size_t count,
unsigned long nr_segs, loff_t pos, uio_seg_t segment, int flags, cred_t *cr)
{
int error;
ssize_t read;
struct iovec iov;
size_t len = iovp->iov_len;
uio_t uio;

iov.iov_base = (void *)buf;
iov.iov_len = len;

uio.uio_iov = &iov;
uio.uio_resid = len;
uio.uio_iovcnt = 1;
uio.uio_iov = (struct iovec *)iovp;
uio.uio_resid = count;
uio.uio_iovcnt = nr_segs;
uio.uio_loffset = pos;
uio.uio_limit = MAXOFFSET_T;
uio.uio_segflg = segment;
Expand All @@ -195,6 +210,18 @@ zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t pos,

return (read);
}
ssize_t
zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
uio_seg_t segment, int flags, cred_t *cr)
{
struct iovec iov;

iov.iov_base = (void *)buf;
iov.iov_len = len;

return (zpl_read_common_iovec(ip, &iov, len, 1, pos, segment, flags,
cr));
}

static ssize_t
zpl_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos)
Expand All @@ -215,20 +242,41 @@ zpl_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos)
}

ssize_t
zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
uio_seg_t segment, int flags, cred_t *cr)
zpl_aio_read(struct kiocb *iocb, const struct iovec *iovp,
unsigned long nr_segs, loff_t pos)
{
cred_t *cr = CRED();
struct file *filp = iocb->ki_filp;
size_t count;
ssize_t read;

ASSERT(iovp);
count = iov_length(iovp, nr_segs);

crhold(cr);
read = zpl_read_common_iovec(filp->f_mapping->host, iovp, count,
nr_segs, pos, UIO_USERSPACE, filp->f_flags, cr);
crfree(cr);

if (read < 0)
return (read);

iocb->ki_pos += read;
return (read);
}

ssize_t
zpl_write_common_iovec(struct inode *ip, const struct iovec *iovp, size_t count,
unsigned long nr_segs, loff_t pos, uio_seg_t segment, int flags, cred_t *cr)
{
int error;
ssize_t wrote;
struct iovec iov;
size_t len = iovp->iov_len;
uio_t uio;

iov.iov_base = (void *)buf;
iov.iov_len = len;

uio.uio_iov = &iov;
uio.uio_resid = len,
uio.uio_iovcnt = 1;
uio.uio_iov = (struct iovec *)iovp;
uio.uio_resid = count;
uio.uio_iovcnt = nr_segs;
uio.uio_loffset = pos;
uio.uio_limit = MAXOFFSET_T;
uio.uio_segflg = segment;
Expand All @@ -242,6 +290,18 @@ zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t pos,

return (wrote);
}
ssize_t
zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
uio_seg_t segment, int flags, cred_t *cr)
{
struct iovec iov;

iov.iov_base = (void *)buf;
iov.iov_len = len;

return (zpl_write_common_iovec(ip, &iov, len, 1, pos, segment, flags,
cr));
}

static ssize_t
zpl_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos)
Expand All @@ -261,6 +321,30 @@ zpl_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos)
return (wrote);
}

ssize_t
zpl_aio_write(struct kiocb *iocb, const struct iovec *iovp,
unsigned long nr_segs, loff_t pos)
{
cred_t *cr = CRED();
struct file *filp = iocb->ki_filp;
size_t count;
ssize_t wrote;

ASSERT(iovp);
count = iov_length(iovp, nr_segs);

crhold(cr);
wrote = zpl_write_common_iovec(filp->f_mapping->host, iovp, count,
nr_segs, pos, UIO_USERSPACE, filp->f_flags, cr);
crfree(cr);

if (wrote < 0)
return (wrote);

iocb->ki_pos += wrote;
return (wrote);
}

static loff_t
zpl_llseek(struct file *filp, loff_t offset, int whence)
{
Expand Down Expand Up @@ -645,8 +729,11 @@ const struct file_operations zpl_file_operations = {
.llseek = zpl_llseek,
.read = zpl_read,
.write = zpl_write,
.aio_read = zpl_aio_read,
.aio_write = zpl_aio_write,
.mmap = zpl_mmap,
.fsync = zpl_fsync,
.aio_fsync = zpl_aio_fsync,
#ifdef HAVE_FILE_FALLOCATE
.fallocate = zpl_fallocate,
#endif /* HAVE_FILE_FALLOCATE */
Expand Down

0 comments on commit 5956bd4

Please sign in to comment.