Initial support for lumi.curtain.hagl05

miio/__init__.py

@@ -27,6 +27,7 @@
 from miio.chuangmi_ir import ChuangmiIr
 from miio.chuangmi_plug import ChuangmiPlug, Plug, PlugV1, PlugV3
 from miio.cooker import Cooker
+from miio.curtain_youpin import CurtainMiot
 from miio.device import Device
 from miio.exceptions import DeviceError, DeviceException
 from miio.fan import Fan, FanP5, FanSA1, FanV2, FanZA1, FanZA4

miio/curtain_youpin.py

@@ -0,0 +1,249 @@
+import enum
+import warnings
+import logging
+
+import click
+
+from typing import Any, Dict
+from .click_common import EnumType, command, format_output
+from .exceptions import DeviceException
+from .miot_device import MiotDevice
+
+_LOGGER = logging.getLogger(__name__)
+_MAPPING = {
+        # # Source http://miot-spec.org/miot-spec-v2/instance?type=urn:miot-spec-v2:device:curtain:0000A00C:lumi-hagl05:1
+        # Curtain
+        "motor_control": {"siid": 2, "piid": 2}, # 0 - Pause, 1 - Open, 2 - Close, 3 - auto
+        "current_position": {"siid": 2, "piid": 3}, # Range: [0, 100, 1]
+        "status": {"siid": 2, "piid": 6}, # 0 - Stopped, 1 - Opening, 2 - Closing
+        "target_position": {"siid": 2, "piid": 7}, # Range: [0, 100, 1]
+        # curtain_cfg
+        "manual_enabled": {"siid": 4, "piid": 1}, #
+        "polarity": {"siid": 4, "piid": 2},
+        "is_position_limited": {"siid": 4, "piid": 3},
+        "night_tip_light": {"siid": 4, "piid": 4},
+        "run_time": {"siid": 4, "piid": 5}, # Range: [0, 255, 1]
+        # motor_controller
+        "adjust_value": {"siid": 5, "piid": 1}, # Range: [-100, 100, 1]
+}
+
+# Model: ZNCLDJ21LM (also known as "Xiaomiyoupin Curtain Controller (Wi-Fi)"
+MODEL_CURTAIN_HAGL05 = "lumi.curtain.hagl05"
+
+class MotorControl(enum.Enum):
+    Pause = 0
+    Open = 1
+    Close = 2
+    Auto = 3
+
+class Status(enum.Enum):
+    Stopped = 0
+    Opening = 1
+    Closing = 2
+
+class Polarity(enum.Enum):
+    Positive = 0
+    Reverse = 1
+
+
+class CurtainStatus:
+    def __init__(self, data: Dict[str, Any]) -> None:
+        """ Response from device
+            {'id': 1, 'result': [
+                {'did': 'motor_control', 'siid': 2, 'piid': 2, 'code': -4001},
+                {'did': 'current_position', 'siid': 2, 'piid': 3, 'code': 0, 'value': 0},
+                {'did': 'status', 'siid': 2, 'piid': 6, 'code': 0, 'value': 0},
+                {'did': 'target_position', 'siid': 2, 'piid': 7, 'code': 0, 'value': 0},
+                {'did': 'is_manual_enabled', 'siid': 4, 'piid': 1, 'code': 0, 'value': 1},
+                {'did': 'polarity', 'siid': 4, 'piid': 2, 'code': 0, 'value': 0},
+                {'did': 'is_position_limited', 'siid': 4, 'piid': 3, 'code': 0, 'value': 0},
+                {'did': 'night_tip_light', 'siid': 4, 'piid': 4, 'code': 0, 'value': 1},
+                {'did': 'run_time', 'siid': 4, 'piid': 5, 'code': 0, 'value': 0},
+                {'did': 'adjust_value', 'siid': 5, 'piid': 1, 'code': -4000}
+            ]}
+        """
+        self.data = data
+
+    @property
+    def status(self) -> Status:
+        """ Device status """
+        return Status(self.data["status"])
+
+    """ curtain_cfg """
+    @property
+    def is_manual_enabled(self) -> bool:
+        """Manual control enable status
+        """
+        return self.data["is_manual_enabled"]
+
+    @property
+    def polarity(self) -> Polarity:
+        """Motor rotation polarity
+        """
+        return Polarity(self.data["polarity"])
+
+    @property
+    def is_position_limited(self) -> bool:
+        """Position limit
+        """
+        return self.data["is_position_limited"]
+
+    @property
+    def night_tip_light(self) -> bool:
+        """Night tip light status
+        """
+        return self.data["night_tip_light"]
+
+    @property
+    def run_time(self) -> int:
+        """Run time of the motor
+        """
+        return self.data["run_time"]
+
+    @property
+    def current_position(self) -> int:
+        """Current curtain position
+        """
+        return self.data["current_position"]
+
+    @property
+    def target_position(self) -> int:
+        """Target curtain position
+        """
+        return self.data["target_position"]
+
+    @property
+    def adjust_value(self) -> int:
+        """ Adjust value
+        """
+        return self.data["adjust_value"]
+
+    def __repr__(self) -> str:
+        s = (
+            "<CurtainStatus"
+            "status=%s,"
+            "polarity=%s,"
+            "is_position_limited=%s,"
+            "night_tip_light=%s,"
+            "run_time=%s,"
+            "current_position=%s,"
+            "target_position=%s,"
+            "adjust_value=%s>"
+            % (
+                self.status,
+                self.polarity,
+                self.is_position_limited,
+                self.night_tip_light,
+                self.run_time,
+                self.current_position,
+                self.target_position,
+                self.adjust_value
+            )
+        )
+        return s
+
+class CurtainMiot(MiotDevice):
+    """Main class representing the lumi.curtain.hagl05 curtain."""
+
+    def __init__(
+        self,
+        ip: str = None,
+        token: str = None,
+        start_id: int = 0,
+        debug: int = 0,
+        lazy_discover: bool = True,
+    ) -> None:
+        super().__init__(_MAPPING, ip, token, start_id, debug, lazy_discover)
+
+    @command(
+        default_output=format_output(
+            "",
+            "Device status: {result.status}\n"
+            "Manual enabled: {result.is_manual_enabled}\n"
+            "Motor polarity: {result.polarity}\n"
+            "Position limit: {result.is_position_limited}\n"
+            "Enabled night tip light: {result.night_tip_light}\n"
+            "Run time: {result.run_time}\n"
+            "Current position: {result.current_position}\n"
+            "Target position: {result.target_position}\n"
+            "Adjust value: {result.adjust_value}\n",
+        )
+    )
+    def status(self) -> CurtainStatus:
+        """Retrieve properties."""
+
+        return CurtainStatus(
+            {
+                prop["did"]: prop["value"] if prop["code"] == 0 else None
+                for prop in self.get_properties_for_mapping()
+            }
+        )
+
+    @command(
+        click.argument("motor_control", type=EnumType(MotorControl)),
+        default_output=format_output("Set motor control to {motor_control}"),
+    )
+    def set_motor_control(self, motor_control: MotorControl):
+        """Set motor control.
+        """
+        self.set_property("motor_control", motor_control.value)
+
+    @command(
+        click.argument("target_position", type=int),
+        default_output=format_output("Set target position to {target_position}"),
+    )
+    def set_target_position(self, target_position: int):
+        """Set target position.
+        """
+        if target_position < 0 or target_position  > 100:
+            raise ValueError("Value must be between [0, 100] value, was %s" % target_position)
+        self.set_property("target_position", target_position)
+
+    @command(
+        click.argument("manual_enabled", type=bool),
+        default_output=format_output("Set manual control {manual_enabled}"),
+    )
+    def set_manual_enabled(self, manual_enabled: bool):
+        """Set manual control of curtain.
+        """
+        self.set_property("is_manual_enabled", manual_enabled)
+
+    @command(
+        click.argument("polarity", type=EnumType(Polarity)),
+        default_output=format_output("Set polarity to {polarity}"),
+    )
+    def set_polarity(self, polarity: Polarity):
+        """Set polarity of the motor.
+        """
+        self.set_property("polarity", polarity.value)
+
+    @command(
+        click.argument("pos_limit", type=bool),
+        default_output=format_output("Set position limit to {pos_limit}"),
+    )
+    def set_position_limit(self, pos_limit: bool):
+        """Set position limit parameter.
+        """
+        self.set_property("is_position_limited", pos_limit)
+
+    @command(
+        click.argument("night_tip_light", type=bool),
+        default_output=format_output("Setting night tip light {night_tip_light"),
+    )
+    def set_night_tip_light(self, night_tip_light: bool):
+        """Set night tip light.
+        """
+        self.set_property("night_tip_light", night_tip_light)
+
+    """ motor_controller """
+    @command(
+        click.argument("adjust_value", type=int),
+        default_output=format_output("Set adjust value to {adjust_value}"),
+    )
+    def set_adjust_value(self, adjust_value: int):
+        """Set adjust value.
+        """
+        if adjust_value < -100 or adjust_value > 100:
+            raise ValueError("Value must be between [-100, 100] value, was %s" % adjust_value)
+        self.set_property("adjust_value", adjust_value)
+