-
Notifications
You must be signed in to change notification settings - Fork 20
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
No display for a 2432S028R #4
Comments
So it's definitively a problem with the lib
I have tried the old version for the demo same result. I have an image but corrupted. |
Hi Smanar, Might also be that indeed there's something wrong but now, working on the feature branch 'settings-in-board', just tested the esp32-3248S035; it works. Think this might be caused by the demo code; If the wifi does not connect it the audio pointer is null Use:
and
The if (audio) was missing! |
Something else I noticed. Maybe due to the extra flash. Problems uploading/crc errors etc, even at low speeds. |
Same result, have started from scratch. Have just edited
and
Have used the lv_conf.f from the homepage The Led is flashing, have return too, only the display is missing. And if it work, I have same issue than here x821938/ESP32-2432S028R-arduino-platformio-simple-test#1 |
So for information I have tried other projects on github. I m now trying CYD-Klipper, this one work with LVLG too but not your lib and all is working. |
Nope, you can read them on your picture, text is "reversed"on mine. |
Hi Smanar, If it is mirrored you can override the param PANEL_MIRROR_X for the specific device: The name option might change in the near future as I'm working on this right now. Hope this helps. You can use the feature/esps3 branch for that. Make sure to check out the demo with submodules because settings have been moved to the boards. Also there is still development going on! |
I can make it working :
But I think some devices features are not detected, as I have only the "ClickMe" button and the counter, not the picture. |
Hi Smanar,
Yes, I think you're using the main branch. That demo has no picture.
I was referring to the feature branch, but this is still under development.
…On Sun, Dec 17, 2023 at 1:32 PM Smanar ***@***.***> wrote:
I can make it working :
- using old lib
- using old demo code
- using -D TFT_FLIPPEDMIRRORED
- using -D TFT_ORIENTATION_LANDSCAPE
But I think some devices features are not detected, as I have only the
"ClickMe" button and the counter, not the picture.
—
Reply to this email directly, view it on GitHub
<#4 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AB2ENB43ZWVR3QTSM4RA4RLYJ3Q5XAVCNFSM6AAAAABATQGX3CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNJZGE2TSMBQGU>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Ha ok, so all is working fine with adding thoses settings for my device, I haven't tested other project that use this lib yet as I have already started mine with only basic libs but I think it will be be same solution. |
Hello, I m trying to make the demo working, but for the moment without success.
The code is running, I can see information on serial monitor, the led is flashing but nothing on display (it is just powered, with white screen)
I m using the defaut code with some changes on a 2432S028R Hardware.
And BTW, I had so much warning during compilation
The text was updated successfully, but these errors were encountered: