Skip to content

An educational software system of a tiny self-compiling C compiler, a tiny self-executing MIPS emulator, and a tiny self-hosting MIPS hypervisor.

License

Notifications You must be signed in to change notification settings

scooley/selfie

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Selfie Build Status

Selfie is a project of the Computational Systems Group at the Department of Computer Sciences of the University of Salzburg in Austria.

The Selfie Project provides an educational platform for teaching undergraduate and graduate students the design and implementation of programming languages and runtime systems. The focus is on the construction of compilers, libraries, operating systems, and even virtual machine monitors. The common theme is to identify and resolve self-reference in systems code which is seen as the key challenge when teaching systems engineering, hence the name.

There is a free book in early draft form called Selfie: Computer Science for Everyone using selfie even more ambitiously reaching out to everyone with an interest in learning about computer science.

Selfie is a fully self-referential 7k-line C implementation of:

  1. a self-compiling compiler called starc that compiles a tiny but powerful subset of C called C Star (C*) to a tiny but powerful subset of MIPS32 called MIPSter,
  2. a self-executing emulator called mipster that executes MIPSter code including itself when compiled with starc,
  3. a self-hosting hypervisor called hypster which is based on a tiny microkernel implemented in mipster and provides MIPSter virtual machines that can host all of selfie, that is, starc, mipster, and hypster itself, and
  4. a tiny C* library called libcstar utilized by selfie.

There is also a simple SAT solver implemented in selfie that will eventually become part of a self-verifying theorem prover. This is ongoing work.

For further information and support please refer to http://selfie.cs.uni-salzburg.at

Supported Platforms

Selfie runs on Mac, Linux, Windows and possibly other systems that have a terminal and a C compiler installed. Even if you only have access to a web browser you can still run selfie through a cloud-based development environment. There is also a port of selfie to RISC-V that runs on the spike emulator and the pk kernel.

Installing Selfie

Here is how to install selfie:

  1. Get a github account unless you already have one.
  2. If you only have access to a web browser, fork selfie into your github account, then get a cloud9 student account, connect it to your github account, verify your email address and set a password (important!), and finally clone your fork of selfie into a new cloud9 workspace. If you have access to a terminal and there is a C compiler installed, just download and unzip selfie onto your system.
  3. Make sure that the C compiler supports generating 32-bit binaries which may require installing gcc-multilib depending on your system. On Ubuntu systems (including cloud9), for example, first run:
sudo apt-get update && sudo apt-get --yes install gcc-multilib

At this point we assume that you have a system that supports running selfie. Below we use the make command assuming it is installed on your system which is usually the case. However, we also show the command invoked by make so that you can always invoke that command manually if your system does not have make installed.

The next step is to produce a selfie binary that runs on your system. To do that type make in your terminal. This will invoke the C compiler:

cc -w -O3 -m32 -D'main(a,b)=main(a,char**argv)' selfie.c -o selfie

and compile selfie.c into an executable called selfie as directed by the -o option. The executable contains the C* compiler, the mipster emulator, and the hypster hypervisor. The -w option suppresses warnings that can be ignored here. The -O3 option instructs the compiler to generate optimized code. The -m32 option makes the compiler generate a 32-bit executable. The -D option is needed to bootstrap the main function declaration. The char data type is not available in C* but may be required by the compiler.

Running Selfie

Once you have successfully compiled selfie you may invoke it in your terminal according to the following pattern:

./selfie { -c { source } | -o binary | -s assembly | -l binary | -sat dimacs } [ (-m | -d | -y | -min | -mob ) size ... ]

The order in which the options are provided matters for taking full advantage of self-referentiality.

The -c option invokes the C* compiler on the given list of source files compiling and linking them into MIPSter code that is stored internally.

The -o option writes MIPSter code produced by the most recent compiler invocation to the given binary file.

The -s option writes MIPSter assembly of the MIPSter code produced by the most recent compiler invocation including approximate source line numbers to the given assembly file.

The -l option loads MIPSter code from the given binary file. The -o and -s options can also be used after the -l option. However, in this case the -s option does not generate approximate source line numbers.

The -sat option invokes the SAT solver on the SAT instance loaded from the dimacs file. The current implementation is naive and only works on small instances.

The -m option invokes the mipster emulator to execute MIPSter code most recently loaded or produced by a compiler invocation. The emulator creates a machine instance with size MB of memory. The source or binary name of the MIPSter code and any remaining ... arguments are passed to the main function of the code. The -d option is similar to the -m option except that mipster outputs each executed instruction, its approximate source line number, if available, and the relevant machine state.

The -y option invokes the hypster hypervisor to execute MIPSter code similar to the mipster emulator. The difference to mipster is that hypster creates MIPSter virtual machines rather than a MIPSter emulator to execute the code.

The -min and -mob options invoke special versions of the mipster emulator used for teaching.

To compile selfie.c for mipster and hypster use the following command:

$ ./selfie -c selfie.c -o selfie.m

This produces a MIPSter binary file called selfie.m that implements selfie.

To execute selfie.m by mipster use the following command:

$ ./selfie -l selfie.m -m 1

This is semantically equivalent to executing selfie without any arguments:

$ ./selfie

To execute selfie.m by hypster use the following command:

$ ./selfie -l selfie.m -y 1

This is semantically equivalent to executing selfie.m by mipster and thus selfie without any arguments. There is a difference in output though since mipster reports code execution profiles whereas hypster does not.

Self-compilation

Here is an example of how to perform self-compilation of selfie.c:

$ ./selfie -c selfie.c -o selfie1.m -m 2 -c selfie.c -o selfie2.m
$ diff -s selfie1.m selfie2.m
Files selfie1.m and selfie2.m are identical

Note that at least 2MB of memory is required.

Self-execution

The following example shows how to perform self-execution of selfie.c. In this case we invoke the mipster emulator to invoke itself which then invokes the compiler to compile itself:

$ ./selfie -c selfie.c -o selfie1.m -m 4 -l selfie1.m -m 2 -c selfie.c -o selfie2.m
$ diff -s selfie1.m selfie2.m
Files selfie1.m and selfie2.m are identical

Note that the example may take several hours to complete. Also, an emulator instance A running an emulator instance B needs more memory than B, say, 4MB rather than 2MB in the example here.

Self-hosting

The previous example can also be done by running hypster on mipster. This is significantly faster since hypster does not create a second emulator instance on top of the first emulator instance. Instead, hypster creates a virtual machine to execute selfie that runs concurrently to hypster on the first emulator instance:

$ ./selfie -c selfie.c -o selfie1.m -m 4 -l selfie1.m -y 2 -c selfie.c -o selfie2.m
$ diff -s selfie1.m selfie2.m
Files selfie1.m and selfie2.m are identical

We may even run hypster on hypster on mipster which is still reasonably fast since there is still only one emulator instance involved and hypster itself does not add much overhead:

$ ./selfie -c selfie.c -o selfie1.m -m 8 -l selfie1.m -y 4 -l selfie1.m -y 2 -c selfie.c -o selfie2.m
$ diff -s selfie1.m selfie2.m
Files selfie1.m and selfie2.m are identical

Workflow

To compile any C* source code and execute it right away in a single invocation of selfie without generating a MIPSter binary use:

$ ./selfie -c any-cstar-file.c -m 1 "arguments for any-cstar-file.c"

Equivalently, you may also use a selfie-compiled version of selfie and have the mipster emulator execute selfie to compile any C* source code and then execute it right away with hypster on the same emulator instance:

$ ./selfie -c selfie.c -m 1 -c any-cstar-file.c -y 1 "arguments for any-cstar-file.c"

You may also generate MIPSter binaries both ways which will then be identical:

$ ./selfie -c any-cstar-file.c -o any-cstar-file1.m
$ ./selfie -c selfie.c -m 1 -c any-cstar-file.c -o any-cstar-file2.m
$ diff -s any-cstar-file1.m any-cstar-file2.m
Files any-cstar-file1.m and any-cstar-file2.m are identical

This can also be done in a single invocation of selfie:

$ ./selfie -c any-cstar-file.c -o any-cstar-file1.m -c selfie.c -m 1 -c any-cstar-file.c -o any-cstar-file2.m
$ diff -s any-cstar-file1.m any-cstar-file2.m
Files any-cstar-file1.m and any-cstar-file2.m are identical

The generated MIPSter binaries can then be loaded and executed as follows:

$ ./selfie -l any-cstar-file1.m -m 1 "arguments for any-cstar-file1.m"

Linking

To compile and link any C* source code from multiple source files use:

$ ./selfie -c any-cstar-file1.c any-cstar-file2.c ... -m 1

For example, to make the source code of selfie.c available as library code in any C* source code use:

$ ./selfie -c any-cstar-file.c selfie.c -m 1

Note that multiple definitions of symbols are ignored by the compiler with a warning.

Debugging

Selfie's console messages always begin with the name of the source or binary file currently running. The mipster emulator also shows the amount of memory allocated for its machine instance and how execution terminated (exit code).

MIPSter assembly for selfie and any other C* file is generated as follows:

$ ./selfie -c selfie.c -s selfie.s

If the assembly code is generated from a binary generated by the compiler (and not loaded from a file) approximate source line numbers are included in the assembly file.

Verbose debugging information is printed with the -d option, for example:

$ ./selfie -c selfie.c -d 1

Similarly, if the executed binary is generated by the compiler (and not loaded from a file) approximate source line numbers are included in the debug information.

About

An educational software system of a tiny self-compiling C compiler, a tiny self-executing MIPS emulator, and a tiny self-hosting MIPS hypervisor.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 87.4%
  • Assembly 9.9%
  • Makefile 2.7%