New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Can't restore firmware 6p #240
Comments
Manually make a backup of the firmware file and restore it when something
fails. The app can now be considered depricated as we did not update it for
quite a while. If you have a firmware version in your android rom that is
supported by nexmon, compile your own firmware from the repository and
install it.
…On Fri, Jul 20, 2018 at 7:32 PM, S1CAR1US ***@***.***> wrote:
The documentation on using the app is scarce. I read that using the app is
the easy way to get monitor mode working with a 6p. I install the app,
follow the prompts to install the tools. Then firmware, make a backup,
install nexmon firmware, WiFi stops working and can no longer turn it on at
all. Go to firmware section in the nexmon app to restore firmware using the
backup I made, and now it tells me that the device I have is not
supported... I have a 6p and just a minute ago it was supported. I have had
to re flash Nexus image and nethunter twice now because of this. How do I
fix without starting over every time?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#240>, or mute the thread
<https://github.com/notifications/unsubscribe-auth/ALP_7m1iJ6AkGSuqnmPhYjFKp0PDmhVmks5uIhQ4gaJpZM4VYku8>
.
--
Matthias Schulz
Secure Mobile Networking Lab - SEEMOO
Email: matthias.schulz@seemoo.tu-darmstadt.de
Web: http://www.seemoo.de/mschulz
Phone (new): +49 6151 16-25478 Fax: +49 6151 16-25471
Department of Computer Science
Center for Advanced Security Research Darmstadt
Technische Universität Darmstadt
Mornewegstr. 32 (Office 4.2.10, Building S4/14)
D-64293 Darmstadt, Germany
|
That's a pretty cheap cop-out, the info on your own page refers the app. Now your telling me as if I should have known. At least offer some direction as to how to go about restoring the correct fw |
This should be the location of the firmware file:
/vendor/firmware/fw_bcmdhd.bin
Where exactly do we refer to the app on the webpage?
In any case, you use nexmon on your own risk:
Our software may damage your hardware and may void your hardware’s
warranty! You use our tools at your own risk and responsibility! If you
don't like these terms, don't use nexmon!
…On Fri, Jul 20, 2018 at 8:23 PM, S1CAR1US ***@***.***> wrote:
That's a pretty cheap cop-out, the info on your own page refers the app.
Now your telling me as if I should have known. At least offer some
direction as to how to go about restoring the correct fw
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#240 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ALP_7jcJefnAtkLq1L0blevGerc6JMrPks5uIiANgaJpZM4VYku8>
.
--
Matthias Schulz
Secure Mobile Networking Lab - SEEMOO
Email: matthias.schulz@seemoo.tu-darmstadt.de
Web: http://www.seemoo.de/mschulz
Phone (new): +49 6151 16-25478 Fax: +49 6151 16-25471
Department of Computer Science
Center for Advanced Security Research Darmstadt
Technische Universität Darmstadt
Mornewegstr. 32 (Office 4.2.10, Building S4/14)
D-64293 Darmstadt, Germany
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
The documentation on using the app is scarce. I read that using the app is the easy way to get monitor mode working with a 6p. I install the app, follow the prompts to install the tools. Then firmware, make a backup, install nexmon firmware, WiFi stops working and can no longer turn it on at all. Go to firmware section in the nexmon app to restore firmware using the backup I made, and now it tells me that the device I have is not supported... I have a 6p and just a minute ago it was supported. I have had to re flash Nexus image and nethunter twice now because of this. How do I fix without starting over every time?
The text was updated successfully, but these errors were encountered: